OTTOCAST U2AIR Pro Wireless CarPlay Adapter User Manual
- June 14, 2024
- ottocast
Table of Contents
USER MANUAL
Wireless CarPlay Adapter
U2AIR Pro Wireless CarPlay Adapter
U2AIR Pro
This adapter is designed for iPhone to use Apple CarPlay wirelessly on factory
car multimedia system which has built-in wired Apple CarPlay.
However, NOT every car with built-in CarPlay could fit this adapter. If there
is any issue while using the adapter, please do not hesitate to email us at
[email protected].
| Function | Convert OEM Apple CarPlay to wireless Apple CarPlay |
|---|---|
| Compatibility | Car: with OEM Apple CarPlay |
iPhone: running iOS 10 or newer
Control| OEM touch screen, steering wheel, and joystick control
Input Power| USB 5V~1A
Connectivity| Wi-Fi & Bluetooth
How to check a car has CarPlay or not
-
Plug an iPhone (running iOS 10 or newer) into the car USB ports with genuine factory lightning cable. If there is a notification pop up on iPhone like below, that your car has built-in Apple CarPlay.
-
If there is a CarPlay icon in the car stereo menu, that your car has built-in Apple CarPlay.
-
Contact your car dealer for help.
What’s in the box
Wireless adapter 1
USB cable (Type-C to A) 1
USB cable (Type-C to C) 1
User manual 1
Double-sided sticky pad *1
Interface and connector
Click once while working: disconnect the current iPhone.
Press and hold for more than 10s: factory reset, all connection history will
be erased.
Connection diagram
NOTE! The adapter should be plugged into the USB port that is for wired Apple CarPlay connecting if there are multi USB ports in your car.
How to set up wireless CarPlay
- Turn on your iPhone’s Wi-Fi and Bluetooth, then pair to the Bluetooth named “OTTO-xxxx”
- Tap “Pair-Allow-Use CarPlay” on the iPhone popup notifications
- It will then connect to CarPlay wirelessly after a few seconds.
NOTE! Before pairing to a new iPhone, please disconnect the currently connected phone from Bluetooth/Wi-Fi in iPhone’s control center or click the adapter’s buttons once.
Firmware update & report an issue
Firmware updating is NOT recommended when every function works well.
How to update or report
- If your iPhone is connecting to the wireless CarPlay, enter 192.168.1.101 on iPhone’s browser, next tap “Update” if there is an update available
- If your iPhone could not connect to the wireless CarPlay, please join the adapter’s Wi-Fi network [OTTO-xxxx] by manual and the password is 88888888
- Next enter 192.168.1.101 on iPhone’s browser, tap “Update”.
- At the same web interface, you could also fill in the car make, model years, and issue details, next tap “Submit” to report the issue. After the success notification appears, take a screenshot and email us at [email protected]. We will fix it as soon as possible.
NOTE! The blue and red LED indicators will flash alternative while updating. Wait for more 30s after the white indicator is solid, then disconnect and reconnect the adapter from USB port to finish the whole update.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference; (2) this device must accept any interference
received, including interference that may cause undesired operation.