OTTOCAST MX-XXXX MX Wireless CarPlay and Android Auto Adapter with AirPlay User Manual

OTTOCAST MX-XXXX MX Wireless CarPlay and Android Auto Adapter with AirPlay

Important Information

This device complies with part 15 of the FCC Rules.

Operation is subjected to the following two conditions:

1. )This device may not cause harmful interference ；
2. This device must accept any interference received, including interference that may have caused undesired operation.

How to quickly switch to another phone

1. The device takes record of the last two recently connected phones.
   

2. Restarting the device automatically connects you to the last connected phone.
   

3. Pressing this button will automatically disconnect the current phone with a flashing red light.
   

4. When the light tuns blue, it will automatically connect to the other recorded phone.
   

Update on iPhone

1. If your iPhone is connecting to the wireless CarPlay, enter 192.168.1.101 on iPhone’s browser, next tap “Update” if there is an update available.
2. If your iPhone could not connect to the wireless Car Play, please join the adapter’s WiFi network [Adapter MX-xxxx] by manual and the password is 88888888. Next enter 192.168.1.101 on iPhone’s browser, and tap “Update”.

Update on Android smartphone

1. If you have connected to the Android Auto wirelessly, disable Bluetooth and forget the WiFi network first.

2. While powered on, press the button and hold for 3s then release. The LED indicator will switch to green light after 1-2 seconds.
   

3. On your phone, go to WiFi >> Advanced settings >> WiFi direct, tap [Adapter MX- xxxx] and make sure it has connected.
   

4. Enter 192.168.1.101 on smartphone browser, next tap “Update” if there is an update available.
   

Product Overview

Lights & Buttons

• Not connected

• Disconnect/Switch connections

• Upgrade mode for Android phone

• Connecting…

• Switch to AirPlay mode

• Factory reset data

What’s in the box

• 1* Wireless adapter
• 1* USB cable (Type-C to A)
• 1* USB cable (Type-C to C)
• 1 User manual 1
  

Firmware update

Firmware updating is NOT recommended when every function works well.

NOTE! The red and blue indicator lights will flash alternately while updating. Wait for more than 30s after light is always on, then disconnect and reconnect the adapter from the USB port to finish the whole update.

How to report an issue

If you encounter any issue while using the adapter, you could directly report the issue online and send us the screenshot of the feedback. We will fix it as soon as possible. screenshot.

• For iPhone users, please enter 192.168.1.101 on your iPhone browser to submit the issue details after connected to the WiFi network [Adapter MX-xxxx]
• For Android users, please follow the steps of [update on Android smartphone] on the previous page, then enter 192.168.1.101 to submit the issue.

Connecting the vehicle

Connect to CarPlay

1. Connect this Bluetooth device

2. Proceed to pair it with your phone

3. Obtain the permission to sync Contacts

4. Confirm product’s Bluetooth name

5. Enter the main interface of the product
   

6. Use CarPlay
   

AirPlay projection

1. Disconnect Bluetooth connection
   

2. Double-press this button to enter AirPlay interface and follow the interface prompts to operate.

3. Enter the main interface of the product
   

4. Use AirPlay
   

Connect to Android Auto

1. Connect this Bluetooth device
   

2. Proceed to pair the Bluetooth device
   

3. Use Android Auto
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>