arteconfort Enif Warm Pared Light Instruction Manual
- June 4, 2024
- arteconfort
Table of Contents
arteconfort Enif Warm Pared Light
THANKS FOR TRUSTING IN ARTECONFORT
Congratulations, you have just purchased an
Artecontort solar lamp: cutting-edge technology combined with the highest
energy efficiency.
CAUTION
- Use and unauthorized technical modifications could suppose a risk of injury.
- This device can be used by children aged 8 years and above and to people with reduced physical, sensory or mental abilities or lack of experience and knowledge if they are supervised or instructed about the use of the device safety and understand the risks involved. As well as cleaning and maintenance of the device.
- Children should not play with the device.
The instructions and safety regulations in this manual cannot prevent all conditions and situations that may occur. For obvious reasons, this manual cannot include factors such as caution and care. These factors must be assumed by who installs, maintains, uses, and enjoys the product.
WARNING
Read this instruction carefully before the manual begins installation and save
it for future reference. In case of transfer of the device, you must also give
this instruction manual to the corresponding person.
GUARANTEE
You can check the warranty for this product on its corresponding page at the end of this manual
BEFORE INSTALLATION
- Open the box and unpack the pieces, handling them carefully so they do not get damaged.
- it is advisable to have a sufficiently large surface to perform the installation.
- identity all parts before beginning assembly.
LIGHT MODES
- During the daytime, the system is charging, and the light is turned off. At night, the system starts lighting automatically
- When installed, allow the battery to charge for 1 or 2 days before the first use.
- Each press of a button will replace a light mode.
- Shutdown: the battery will keep charging but the light will not turn on.
- It will work according to the installed mode every day, no need to switch again.
MAINTENANCE
- If the luminaire does not turn on at night because the battery has been discharged, turn it off and allow it to charge for 1 or 2 days before turning it on again.
- Clean the appliance regularly to maintain its appearance as new. To do this, use a soft, lint-free cloth to avoid scratching the finish.
- Be sure to install the product in an area where it receives direct sunlight for optimal battery charging.
- Select an outdoor location away from another light source at night, such as street lights. Other lights may cause the product to not turn on automatically at night.
- The replacement of the battery must be done by a licensed electrician
ENVIRONMENT
Do not throw electrical appliances into the household waste, use selective collection facilities. Consult local authorities for more information. electrical appliances are deposited in landfills, hazardous components can seep into groundwater and enter the blood chain, damaging health, and well- being Thanks for taking care of the environment.
Installation
Connection
Warning
NOTE: DO NOT INSTALL IN SHADED AREAS
NOTE: DO NOT INSTALL IN AREAS WITH SOURCES OF LIGHT
Contact
If you have any questions, problems, or missing components, consult your dealer. You can also contact us through email at into@artecontort.com or through the contact form available on our website.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>