iGear-U2 Desk Lite Business Desk LED Lamp User Manual
- June 4, 2024
- iGear
Table of Contents
iGear-U2 Desk Lite Business Desk LED Lamp
Production Description
- LED light that’s uniform and soft on the eyes.
- High-performance LED light source, for higher luminosity.
- Sensitive touch dimmer control, for easy usage.
- Three-grade adjustable brightness is good for everyday use.
- Easy to carry, flexible goose neck lamp arm can light different angles as per your requirement.
- Energy-saving: low power consumption, low degradation, saves up to 80% energy.
- Eco- Friendly: free from mercury and plumbum, creates a low-carbon footprint.
- Without fragile glass elements, safer and more convenient.
- Long lifespan (More than 30,000 hours).
- High definition VA screen.
Instruction
- Connect the adapter to the lamp.
- Touch the key to turn on/off the lamp.
The range of activity for lamp arm and chimney:
- Please hold the base of a lamp when adjusting the angle
- The range of activity for the lamp arm is 150 degrees (May break due to over-adjustment)
Battery compartment
Function
Operation for Setting Calendar and Alarm Snooze
Date and Time setting
- Under normal mode, press the SET key to enter the date and time setting mode, and press SET again to enter the next setting, the sequence of settings is as below. Hour – minute – year – month – day- back.
- Press UP and DOWN to set the day of the week accordingly.
- Press the MODE button or if there is no operation for 60 seconds the lamp will exit the setting screen and switch to the Home screen.
- Under normal mode, press UP to change between 12 and 24 hours format.
Snooze function setting
- Under normal mode, press MODE to enter alarm mode.
- Under alarm mode, press SET alarm setting, press SET again to enter the next setting, the sequence of setting is as below: Hour – minute – year – month – day- back.
- Under alarm mode, press the UP and DOWN key to start or stop the Alarm and Snooze function. Start Alarm function – start snooze function – Stop Alarm and Snooze function.
- As the alarm starts ringing, it will ring for a minute, to snooze the alarm, Press the SET key or any button to stop the alarm.
Specification
| Color Temperature | 5000(+/-)500k |
|---|---|
| CRI | >80Ra |
| Power | 5V 1A |
| Material | ABS+ RUBBER |
| Luminous | >200LM |
| Power | 5W |
Attention
- Do not self-disassemble the product.
- Please use the vendor’s specified adapter and power socket to maintain normal working.
- Please do not use the lamp in a high-temperature or high-humidity environment.
- LED light source directly.
In the case the below conditions occur, please pull out the power cord, stop using (if needed, please call for help):
- If the power cord or power plug breaks
- The lamp holder gets damp or wet
- The shell and joint activities of the lamp holder breaks
- The lamp holder emits smoke or a spark
- An abnormal flickering or broken LED light bulb
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>