iGear LIMO Wireless Bluetooth Speaker User Manual

iGear LIMO Wireless Bluetooth Speaker

SPECIFICATIONS

• Bluetooth version: 5.0
• Speaker driver unit size: 4 INCH
• Output power: lOW x 2
• Frequency response: 100Hz-20KHz
• Signal-to-noise ratio: >=85dB
• FM scan range: 87.5-108.0Mhz
• Wireless range: 10 meter
• Max memory USB/SD: 32GB
• USB charging: DC SV
• Battery capacity: 3600mAh
• Backup time via wireless mode: Approx 7.5-2 hours at max volume
• Backup time via USB mode: Approx 1.5-2 hours at max volume
• Charging via USB port (PC!: 4-5 hours charging time

ACCESSORIES

• Charging cable: l piece;
• Audio cable: l piece;

CONNECT TO BLUETOOTH DEVICE
Turn on the unit and switch on your mobile Bluetooth, then search for the name ‘iGear Limo’ and pair the device. Once the device is paired, Bluetooth will automatically connect when the unit is turned on subsequently.

BLUETOOTH
Turn on the speaker, it starts in Bluetooth mode directly. After pairing, the device can play music. Short press ►IIto Play/Pause, Short press..ior?to surf through Prev or Next track. Long press..i /+or -/?◄ to increase or decrease the volume.

AUX-IN
Insert the AUX cable into AUX jack, and press ‘M’ to switch to AUX-IN mode. Long press 111+1/+or-/l+C to increase or decrease the volume. In AUX mode, the track cannot be changed using the speaker buttons.

USB/TFCARD
Insert the USB/TF card into the USB/TF slot. It will read the MP3 format music automatically. Press ►II to Play/Pause.Short Press Hi-I or l+C to switch to Prev or Next Song. Long pressJ+I/+ or -/1+4 to increase or decrease the volume.

FM RADIO
Long press the Play/Pause ►II button, it will search for the available stations and save them automatically. Once the search is completed, Short press the the11+1 or i+cbutton to switch between the saved stations. Long press1+1 /+ or -/l+C to increase or decrease the volume. NOTE: AUX Port connection can receive FM signal clearly as it has the same function as the antenna.

CHARGING
Please use the original charging cable to charge. Red LED display when on charging.

TWS OPERATION

• Turn on both speakers at the same time.
• Choose one of them, on one of the speaker’s press and hold the M button for a few seconds, then a notification sound will indicate of pairing.

Note: TWS works in Bluetooth Mode only

INSTALLATION

1. POWER OFF/ON
2. Volume knob: To turn ON/OFF the speaker and control the master volume.
3. DC SV: Plug the Micro USB cable into the speaker and connect the other end USB port to the power source. (DC 5V)
4. AUX: Aux-in jack
5. USB slot: Use to read the Mp3 files in FAT32 format with a maximum size of 32GB
6. TF slot Use to read the Mp3 files in FAT32 format with a maximum size of 32GB
7. MIC 6.35MM Mic-in jack
8. Play/Pause Under USB/F/Bluetooth mode, short press for play and pause;
9. M. To change the mode during USB/TF, Bluetooth, FM, and Aux-in modes.
10. PREV: USB/RF/Bluetooth/FM mode: Press to move the previous FM channel/track. long press to decrease the volume.
11. NEXT: USB/TF/Bluetooth/FM mode: Press to move the next FM channel/track. long press to increase the volume.
12. MIC Button to select KARAOKE mode.
13. REPEAT: select REPEAT mode.NOTE: If FM mode reception is not good, connect a Micro USB cable for better FM reception.

Warranty period: 1 Year. In case of consumer complaints: Toll-free number 1800 22 8495 Email: sales@igear.asia (Between 10 am to 5 pm, Mon-Fri)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>