iGear EVOKE Retro Modern Style Radio and MP3 Player User Manual
- October 30, 2023
- iGear
Table of Contents
iGear EVOKE Retro Modern Style Radio and MP3 Player
USING OPERATION
RADIO
- ON/OFF KNOB
- A. Turn the Volume knob to turn on the radio
- B. Volume is adjusted with the Volume knob to desired sound level.
- Select the mode by sliding the mode selector to FM/AM/SW mode.
- Tune in the desired station by turning the tuning knob to search for the available FM/AM/SW stations.
ANTENNA:
For FM and SW signal reception a telescopic antenna is provided and for AM
signal reception a ferrite antenna has been built in. These antennas are
direction oriented, and it is recommended to rotate the set for proper signal
reception.
SOLAR PANEL:
A solar panel is provided on top of radio to charge the set using Solar
energy.
MEDIA PLAYER:
Slide the mode selector to Music option. Music can be played via Bluetooth or
by Inserting USB drive or TF/SD card.
Press Next/FF ( ) or Prev/REW ( ) button to choose desired song.
BLUETOOTH:
Change from Radio mode to Bluetooth mode by sliding the mode selector to Music
mode. Turn on the Bluetooth of your digital device (mobile phone/Tablet) and
search for the name “Gear Evoke” and connect it.
POWER OPERATION
DC OPERATION: Plug the Charging cord into a wall outlet.
Note: Please check carefully that the voltage of your household matches
with the voltage on your set.
SPECIAL ATTENTION
- This unit must not be exposed to moisture or rain.
- Ensure all connections are properly made before operating the unit.
- This unit should be positioned so that it is it properly ventilated areas.
- Do not expose this unit to direct sunlight for prolonged period or heat radiation sources.
Warranty Period: 1 Year
In case of consumer complaints:
Customer Support: +91 93726 67193
Email: support@igear.asia
(Between 10am to 5pm, Mon to Fri)
www.igear.asia