iGear IG1915 True Wireless Earbuds User Guide
- May 15, 2024
- iGear
Table of Contents
iGear IG1915 True Wireless Earbuds
Product Diagram
Packing List
- IG1915 TWS earphones
- Earphones charging case
- Type C charging cable
- Instruction manual
Product specification
Product model: IG1915
True wireless version : V5.0
Battery specification: earphone 3.7v ;
Supported mode: HSP1 .2, HFP1 .6, A2DP1 .3, AVRCP1 .5
Sensitivity: 42dB/mW
Signal distance: 10 m (in an ideal environment without any large
obstacles)
Playing time: about 2-3 hours
Talk time: approximately 2-2.5 hours
Standby time: about 400 hours
Charging time: about 45-60 minutes
Functional instructions
-
Power On:
a. Take the earphones out of the charging chamber and long press the left and right multi-function buttons for 3 seconds.
b. The voice command will note “Power on”
c. Blue and red light will flash alternately. -
Power Off:
a. Place the earphones in the charging case and they will be turned off automatically.
b. The voice command will note “Power off’
c. Red light will long flash to signal power off.
d. Alternatively earphones can be switched off by holding down multi- function buttons for 6 seconds. In this instance the voice command will note power-off and the red light will flash 3 times. -
Pair one-time only:
a. Once paired for the first time your earphones will remain paired and automatically reconnect with any paired device. -
Play/Pause:
a. Short Press Play: Blue light will flash slowly.
b. Short Press Pause: Blue light will flash slowly. -
Switching Songs:
a. Triple Press the left earphone multi-function button to play the last song.
b. Triple Press the right earphone to play the next song. -
Volume Up/Down:
a. Double click the left earphone multi-function button to decrease volume.
b. Double click right earphone multi-function button to increase volume. -
Call Answering:
a. Incoming calls can be answered by pressing either the left or the right multifunction buttons. -
Call Ending:
a. Calls can be ended (Hang-Up) by pressing either the left or the right multi-function button. -
Call Rejection:
a. Incoming calls can be rejected by pressing both the left and right multi-function button for 2 seconds. -
Voice Assistant:
a. Activate Siri or Google voice assistant by pressing the right multi- function button 3 seconds. -
Low Battery Alert:
a. When the batteries of the earphones are running low a warning chime will sound every 30 seconds, if left uncharged this will stop when batteries are completely discharged.
Pairing Method
-
Initial Pairing:
a. When earphones are removed from the charging case both flash blue/red continuously.
b. After approx. 8 seconds one will stop flashing whilst the other will continue flashing slowly, your earphones are ready to pair with your device.
c. Search for iGear-lG1915 from your devices list of available Bluetooth devices and pair.
d. Once paired your device will prompt “Connected” and the main earphone will continue to slowly flash blue. -
When unpaired from your device both earphones will once again flash blue/red continuously.
Charging Method
-
Please ensure insulating sheets are removed prior to charging
-
Charging your earphones:
a. To charge your earphones simply place them back into the charging case.
b. When charging your earphones, the earphone will show a red light -
Charging your earphones case:
a. Insert the Type-c USB cable into a power source and the charging case, light flashing.
Precautions
- Always charge your charging case in a safe environment.
- Once fully charged disconnect the USS Type-C power cable from the case to avoid any possible long-term damage caused by overcharging.
- Prolonged use of high volume could cause hearing damage.
- Do not use or place your earphones or charging case in corrosive environments.
- Bluetooth signals can be compromised if near sources of interference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>