iGear GALAXY Party Bluetooth Speaker User Manual
- October 30, 2023
- iGear
Table of Contents
Contents:
General Information
- Previous/Volume-
- Next/Volume«
- Play/Pause and Mode switching
- Power button/ Light mode switch
- TF card slot
- Charging port
Power On/Off
- Long press the power button for three seconds to turn on;
- Long press the power button for three seconds to turn off.
Bluetooth connection
- Turn on the Bluetooth speaker, the breathing light flashes slowly.
- Then turn on the Bluetooth of your phone and search for “iGear GALAXY’. Click manually to connect.
- The speaker can automatically reconnect to the last paired device. So when the Bluetooth of your device turns on, (Just turn on the speaker), it will automatically reconnect.
Answer incoming calls
Press the power button to answer the incoming call.
Reject incoming calls
Long press the power button for 2 seconds to reject the incoming call.
End call
Press the power button once to end the ongoing call
Redial calls
Press the power button twice to redial the last call.
Mode Switching
Long press the play/pause button to switch between modes (Bluetooth/ TF card
/FM)
Light modes
Short press the power button to switch between four lighting modes.
TF card mode
Simply insert the TF card into the TF card slot and the device will
automatically recognize and play the music stored in it.
Clear pairing records
Press the previous/volume high(+) button three times to clear the pairing
records
FM mode
- Long press the play/pause button to switch on the FM mode. Note: Insert the Type-C cable into the charging slot as an antenna for better reception.
- Press the play/pause button twice to activate auto channel search
- Press the play/pause button twice for 2 seconds to stop the search
- Long press the to select the desired channel
Direction to play music
- Short press the play/pause button to Play/pause music
- Long press the “-” button for previous song
- Long press the “+” button for next song
- Short press the s’ button in order to decrease Volume
- Short press the “+” button in order to increase Volume
True Wireless Stereo (TWS) You can connect two iGear Galaxy speakers as a pair for stronger stereo and surrounding sound effect.
- Make sure the Bluetooth function is OFF on your smartphone/media player,
- Turn on two iGear Galaxy speakers;
- Press the play/pause button twice on one of the speakers. There will be a “dong” Sound. Wait for about 1 minute after the prompt, there will be a “TWS Pairing complete” prompt when the pairing is successful
- Then turn On the Bluetooth of your smartphone/media player and search for “iGear Galaxy’. to connect S. To disconnect the TWS function, double click the play/pause button.
Charging
- As the product has a built-in non-removeable and rechargeable battery, we recommend to use the Type•C cable provided with the speaker
- The power LED lights up red while charging and goes off when charging is complete
Specifications
Bluetooth version: V53
Rated power: lOW
Speaker size:57MM
Battery 3.7V/1500mAh
Play time: 10Hrs (50% volume)
Charging time: 4Hrs
Support: BT, TVVS, TF, hands-free calls, FM
Bluetooth range:10M Input voltage: DC5V/IA
Charging port : Type-C Product size:10cm X 10cm X 138mm
Material: ABS+PC
Precaution
- Please follow the instructions to operate.
- Please charge the product with input power of or below SV/IA, in order to protect the battery
- Please do not use this product near water. Do not immerse this product in any liquid or splash any liquid on this product.
- Please store or use the product in a normal temperature environment.
- Please keep the product away from heat source, such as radiators, hot air regulators, stoves, or other heat generating instruments.
- Dont jam the ports of the product, such as charger port, LED port and microphone etc.
Warranty
Warranty period:1 Year In case of consumer complaints:
Customer Care – +919372667193
Email: sales@igear.asia (Between 10am to 5pm, Mon-
Fri)
www.igear.asia