CONQUEST S16 Rugged Smartphone Waterproof User Manual

CONQUEST S16 Rugged Smartphone Waterproof

Button Description

1.  SD card/SIM card
2.  AI Smart Button
3. Fn Button
4. PTT Walkie Talkie Button
5. Front Camera
6.  lnfrared Remote Launch Window
7.  Type-C Interface
8.  SIM card
9. Volume + key
10. Volume – key
11. 0N/0FF
12. UV Detection port
13. Rear Camera
14. Flash Light
15. Fingerprint Recognition
16. Wireless Charging Sensing Area
17. NFC Sensing Area
18. Magnetic dock station / charging contact

Dual SIM Dual StandbySingle -Pass Description

dual card dual standby single pass” design. two cards inserted in the phone cannot be used Voice and data services simultaneously. When one of the cards is talking,
The other card can not answer the cal, If someone dials another card al this lime, you may hear”The number you dialed is out of service, please redail later.· “Sorry! The subscriber you dialed can not be connected for the moment, please redial later.” or other voice prompts When one of the cards is using data service, the other card had no data service acl to use. The above situation is lhe single-pass feature of the mobile phone, which can significantly reduce the power consumption and improve the standby time between, and the operator network status has nothing lo do. Suggest that you consult the local operator, open “missed call remnder”.

Safety instructions

please read the Instruction carefully before using tihe mobile phone to ensure you can use your phone safely and correctly.

Daily use

• Do not oover objects or apply film on the light sensor to affect the mobile phone nonmal use. If you are using a screen protector.do not wrap the light sensor Parts, is recommended that you use a special screen prolector  an opening for the light sensor.\
• Please Use original or manufacturer-approved accessories, Unauthorized product alteration or repair their<>Ml may cause, you are unable to use this product and void the warranty.
• Do not keep the magnetic stripe card with phone for a long lime, otherwise the magnetic stripe may be demagnetized.
• Do not expose )Wf phone lo s(rong sunlight as it may cause excessive heat damage.
• Do not connect with other unsuitable equipment.
• Do not disassemble the phone.
  Do not put your phone in high temperature or throw it into fire to avoid explosion.

Traffic safety

• Please do not use mobile phones while driving, follow relevant traffic regulations.
• Do not place your phone over the airbag of a car or Covered area.
•  Please ck>not use mobile phones on the airplane. If necessary,h.m off the phone.observe the relevant regulations ot the airfine, in areas and times where mobile phone use is prohibited.

Medical equipment

Radio waves from mobile phones may affect some medical devices, such as the heart ,Pacemakers, cochlear implants, hearing aids, etc. Mobile phones and these mecical devices should be kept more than 20 cm safe distance. If something abnormal happens, consult with the manufacturer, Restrictions on the use of mobile phones.

USING MACHINE TIPS

SIM card slot I (right)

1. Tear the waterproof plug
2. lnsert the card slot with the card pln and remove the card slot.
3. Put the SIM card or TF-<:ard in the position. then place the card slot into the phone, and press the waterproof plug tightly.

SIM card slot II / TF card (left )

1. Tear off the waterproof plug
2.  Insert the card slot with the card pin and remove the card slot.
3.  Put the SIM card or TF card in the designated position,

then place the card slot into the phone, and press the waterproof plug tightly.
Note: This is a SIM card and TF card slot. The TF card can extend to 2TB.

Note:

1. Before the waterproof test. please press the waterproof plug at the USB socket according to the figure
2. After the phone is destructively dropped, ij may affect the waterproof effect
3. After the water is soaked, the voice sent and received by the speaker will be affected. The liquid neecs to be thrown out, and it will return to normal after a period of time.

Trouble clearing

PROBLEM / SOLUTION
abnormal use after soaking in water
Shake the phone. shake out the on the speaker membrane, wait the water inside is completely dry to return to normal; or use a hair dryer blows IO !he horn and earpiece may quickly dry !he water inside Through>,it can restore normal volume.
system halted/ unresponsive /  unable lo charge
Encounter abnormal use of the mobile phone, Long press !he power, bull On to restart !he system.
Magnetic charging / Magnetic dock charging does not work properly.
Check whether there is oxidation on !he magnetic ( suction and the charging contact position. Use  a cotton swab with alcohol Wipe to clean the : charger contact position.
Abnormal power  consumption
If you find that the power, ccnsurr1)(1on is abnormal, check whether ii runs the GPS • Bluetooth . _,,   software for a long !can press the virtual button O lo enter !he background to dose software.
No identification card
Insert card when the phone shutdown ,and it can be used normally when the phone starting up down. if !he card is plugged in, please tum on mode Then tum off or restart !he phone. K !he card can not recognized, try to “‘”P8 !he  !he card ” a cotton swab and alcohol position.
Unable to connect to the network
Please open Settings-Network and Internet-Tum on the mobile data network. Or slide down the  to enter the shortcut switch menu, After dicking the signal icon, the mobile data nelw0!1< switch is turned on.
Phone settings  or features Abnormal use
Please open Settings-Select to enter Advanced -Reset 0ptions•Oear all (restore factory default settings). Test  returns lo normal after booting up. Please contact the after -sales specialist to solve the problem. (Restore factory settings will cause all data on !he phone to be era sec. Please use this function after safe backup

FCC RF Exposure Information and Statement

This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: TD-LTE Smart Phone (FCC ID: 2AWTK-CONQUEST-S16) has also been tested against this SAR limit. SAR information on this and other pad can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 10mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, the use of holsters and similar accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>