Pulsar 79182 APS 5 Battery Charger User Manual
- June 4, 2024
- Pulsar
Table of Contents
79182 APS 5 Battery Charger
User Manual
APS 5 charger is designed to charge APS 5 rechargeable batteries used with PULSAR thermal imaging devices and peor. USB Power Delivery fast charging technology using a standard charging kit (USB Type-C cable, power adapter).
PACKAGE CONTENTS
- APS 5 charger
- Power adapter
- USB Type-C Cable
- Operating Manual
TECHNICAL SPECIFICATION
| SKU | 79182 |
|---|---|
| Power adapter input voltage | 100-240 V (110 V for the US) |
| Power adapter output voltage/current | 5 V 2 A; 9 V 3 A |
| Charging voltage/current | 5V 2 A; 9 V 3A |
| Rated output voltage | 4 2 V |
| Battery compatibility | APS 5 |
| Charging temperature range | 0° C….+35° C (+32° F…95° F) |
| Dimensions | 77 x 35 x 52 mm (3 x 1.5 x 2.05 inches) |
| Weight | 013 kg |
Improvements may be made to the design and software of this product to enhance
its useful features.
The current version of the Operating Manual can be found on the website www
.pulsar-vision.com
BATTERY CHARGING:
- Insert the battery* (1) along the guide to the stop into the AN 5 charger slot (4) (see. Fig.).
- Connect the plug of the USB Type-C cable (7) to the USB Type-C connector of the power adapter (3). Plug the power adapter into a socket 100-240 V (6) (110 V socket for the US).
- Connect the other end of the USB Type-C cable to the USB Type-C connector (5) of the charger (4).
- LED indication (2) displays the battery charging level (see Table).
- Two batteries can be charged at the same time: the second slot is designed for it.
LED indication (2) in battery charging mode
| Battery level is from 0% to 25%
---|---
| Battery level is from 26% to 50%
| Battery level is from 51% to 80%
| Battery level is from 81% to 99%
| The battery is fully charged. It can be
| disconnected from the charger.
| Defective battery. It is forbidden to use a battery.
LED indication (2) in standby**
| Battery level is from 0% to 25%
---|---
| Battery level is from 26% to 50%
| Battery level is from 51% to 80%
| Battery level is from 81% to 99%
| The battery is fully charged. It can be disconnected from the charger.
| Defective battery. It is forbidden to use a battery.
- Purchased separately or supplied as package contents of a device.
Standby mode – an operating mode in which batteries are inserted into the charger, but the power adapter is not connected. In this mode, the indication is on for 10 seconds.
Attention! When using a power adapter that does not support USB Power Delivery fast charging technology, the flicker frequency of LED indicators decreases by 3 times and charge time increases.
Attention!** The charger heats up during fast charging. Excess heat is removed through the radiator and does not affect the device’s operation.
PRECAUTIONS:
- Always use this charger or APS 5 charger supplied with the device to charge APS 5 batteries. Using an unsuitable charger can cause irreparable damage to the battery and fire.
- Do not charge the battery immediately after bringing it from cold to warm. Wait at least 30 minutes for the battery to warm up.
- Do not leave the battery unattended while charging.
- Do not use the charger if it has been modified or damaged.
- Do not leave the battery in a charger connected to the network after charging is complete.
- Do not expose the battery and charger to high temperatures and naked flame.
- Do not disassemble or deform the battery or charger.
- Do not drop and strike the battery and charger.
- The charger is not designed to be immersed in water.
- Keep the charger out of the reach of children.
RECOMMENDATIONS FOR USE:
- The battery is to be charged at an ambient temperature of 0 °C…+35 °C (+32°F…+95°F). Otherwise, the lifespan of the battery will decrease significantly.
- Do not use the charger at temperatures outside the range of 0°C…+35°C (+32°F…+95°F).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>