nuvita 1165 Double Bottle Warmer Instruction Manual
- June 10, 2024
- nuvita
Table of Contents
Bottle Warmer
Instruction Manual
box contents (FIG 1, 2, 3, a, b, c, D, e, f)
A. Bottle warmer main body
B. Ring
C. Lift out basket
D. 12V car adapter
E. Plug
F. Measuring cup
IMPORTANT SAFETY NOTES
Keep the instruction sheet for future reference:
- Only use the appliance indoors/inside the car. NEVER use it outdoors.
- Ensure the voltage is compatible with the electricity supply.
- Always add water first before switching the unit on.
- Use the appliance away from children. Store the appliance in a safe place away from children.
- Once finishing using the bottle warmer, unplug, empty the water from the device and store it in a dry place. Keep it away from children’s reach. Note the surface of the heating element is subject to residual heat after each use.
- DO not immerse any fixed or removable parts in water to avoid injury.
- Follow the heating guidelines suggested for child’s safety during feeding.
- Do not use the appliance with a damaged part. If the damage is from a new unit, please return the unit immediately to the store.
- The supplied accessories of the bottle warmer should only be use.
CUSTOMER SERVICE
If you are experiencing problems with the Nuvita 1165 bottle warmer immediately contact the establishment where the item was purchased.
SETTING GUIDE
The table indicates standard and suggestive heating times, that may vary
according to the size of the bottle, the temperature of the water inside in
the bottle warmer and the initial temperature of the food.
CAUTION: Always check temperature of liquid before feeding to the baby.
| GENTLE DEFROST| WARMING| FAST WARMING
---|---|---|---
START
TEMPERATURE| -5°C| 20°C| 5°C| 20°C| 5°C
CONTENT| HEAT TIME, (MIN)| RECOM-
MENDED
WATER
(ML)| HEAT TIME ,
Ov1IN)
(MIN)| RECOM-
MENDED
WATER
(rviL)| HEAT
,TIME,
(MINS)| RECOM-
MENDED
WATER
(ML)| HEAT
(MIN:SEC) TIME , MN:SEC)| RECOM-
MENDED
WATER
(viL)| HEAT
(MIN:SEC) TIME , OvIIN:SEC)| RECOM-
MENDED
WATER
(ML)
60m1| 40| 200| 12| 140| 18| 140| 2:50| | 3:45| 50
90m1| 45| 16| 20| 3:30| 4:20
120m1| 50| 18| 190| 23| 190| 3:35| 40| 5:25
150m1| 50| 20| 25| 3:45| 5:50
180m1| 55| 23| 28| 3:50| 6:05
210m1| 55| 25| 32| 4:00| 6:25
250m1| 65| 28| 35| 4:05| 6:40| 70
280m1| 65| 30| 37| 4:10| 50| 6:50
300m1| 80| 34| 40| 4:30| 7:00
330m1| 85| 38| 45| 445| 7:20
| FOOD JAR WARMING
---|---
START
TEMPERATURE| 20°C| 5°C
CONTENT| HEAT TIME (MIN)| RECOM- MENDED
WATER (NiL)| HEAT TIME (MIN)| RECOM- MENDED
WATER (ML)
80q| 25| 150| 32| 150
120q| 28| 35
160g| 39| 45
(*) At the end of the GENTLE DEFROST cycle, the final temperature reached will
be about 20°C.
(**) At the end of the WARMING AND FAST WARMING cycle, the final temperature
reached will be about 37°C, the ideal temperature for administering food to
the baby, as it is similar to the temperature of breast milk.
To reach higher temperatures, use the Fast Warming mode by increasing the
times shown in the Table.
| GENTLE DEFROST| WARMING| FAST WARMING
---|---|---|---
START
TEMPERATURE| -5°C| 20°C| 5°C| 20°C| 5°C
CONTENT| HEAT
TIME
(MIN)| RECOM-
MENDED
WATER
(ML)| HEAT
TIME
(MIN)| RECOM-
MENDED
WATER
(ML)| HEAT
TIME
(MIN)| RECOM-
MENDED
WATER
(ML)| HEAT
TIME
(MIN:SEC)| RECOM-
MENDED
WATER
(ML)| HEAT
TIME
(MIN:SEC)| RECOM-
MENDED
WATER
(ML)
60m1| 40| 200| 13| 130| 21| 130| 7:30| | 11:00| 30
90m1| 45| 17| 24| 10:00| 12:30
120m1| 50| 22| 170| 33| 170| 10:30| 20| 14:00
150m1| 50| 25| 38| 11:00| 15:30
180m1| 55| 28| 40| 11:30| 17:00
210m1| 55| 30| 43| 12:30| 18:30
250m1| 65| 35| 45| 14:00| 19:00| 40
280m1| 65| 38| 55| 14:30| 30| 19:30
300m1| 80| 42| 60| 15:30| 21:00
330m1| 85| 47| 65| 16:00| 21:30
| FOOD JAR WARMING
---|---
START
TEMPERATURE| 20°C| 5°C
CONTENT| HEAT
TIME
(MIN)| RECOM-
MENDED
WATER
(NiL)| HEAT
TIME
(MIN)| RECOM-
MENDED
WATER
(ML)
80q| 48| 150| 57| 150
120q| 68| 69
160g| 82| 90
(*) At the end of the GENTLE DEFROST cycle, the final temperature reached will
be about 20°C.
(**) At the end of the WARMING AND FAST WARMING cycle, the final temperature
reached will be about 37°C, the ideal temperature for administering food to
the baby, as it is similar to the temperature of breast milk.
To reach higher temperatures, use the Fast Warming mode by increasing the
times shown in the Table.
DEVICE SETUP
FOR USE AT HOME
- Before using the bottle warmer, ensure the mains outlet is of correct voltage.
- The bottle warmer must be use out of reach of children. Placed the bottle warmer on a stable surface.
- Make sure that the knob is positioned on the OFF symbol and plug the cable to a power outlet.
- Choose one of the heating options and set times and volumes according to the table in the manual.
FOR USE IN CAR
- Before using the bottle warmer, ensure the mains outlet is of correct voltage.
- The bottle warmer must be use out of reach of children. Placed the bottle warmer on a stable surface.
- Connect the car adapter to the cigarette lighter socket of the automobile (12V DC) See. FIG.3.
- Choose one of the heating options and set times and volumes according to the table in the manual.
CAUTION
– During operation, the device indicator light will continuously switch off
and on every time the temperature drops with respect to the selected setting,
until the device is manually switched off.
– Always ensure to avoid any water overflow once a filled baby bottle is
inside.
– Do not use the bottle warmer while the car is moving.
– Always use the bottle warmer with water inside it.
– Re-heating solid food is not recommended.
– The “automatic temperature maintenance” mode of the DEFROST, BABY BOTTLE
WARMING functions will work continuously unless it is manually
disconnected by unplugging the power socket or until the water runs out.
– Before heating, remove the protective cap and the teat from the bottles and
remove the lid from the jars.
OPERATION
Please refer to the SETTING GUIDE section for table of volume and warming
times
GENTLE DEFROSTING
-
Insert the basket and if necessary the adapter ring. See FIG.1. (A-B-C)
NOTE: If the adapter ring does not fit loosely around the bottle, do not use. -
Fill the tank with water as indicated in the GENTLE DEFROSTING table. Do not overflow.
-
Place the bottle or the jar inside the bottle warmer.
-
Turn the knob to the defrost position. See FIG.4.
-
When the indicative time specified in the table ends, turn off the device by turning the knob back to the OFF position. See FIG.8., disconnect the cable from the power outlet and empty any remaining water.
Please note that this function doesn’t substitute the Warming function because at the end of the gentle warming cycle the final temperature will reach max 20°C. To feed the food later, use one of the reheat functions.
WARMING OF BABY BOTTLES (HOME USE)
-
Insert the basket and if necessary the adapter ring. See FIG.1.
NOTE: If the adapter ring does not fit loosely around the bottle, do not use. -
Fill the tank with water as indicated in the WARMING Table. Do not overflow.
-
Place the bottle without the teat and protective cap inside the bottle warmer.
-
Rotate the knob to the bottle position. See FIG.5. The light turns on to indicate that the warming cycle is still on or a cycle is running.
-
When the light switches off, it does not indicate that the heating cycle has ended, but simply that the device has reached the set temperature. Remove the bottle
from the device when the indicative time shown in the Table has expired. -
Shake the bottle slowly to distribute the heat evenly. Pour a few drops on the back of your hand to make sure that the temperature of the milk is not too high before feeding the baby.
-
When the indicative time shown in the WARMING table ends, turn the knob to the OFF position. See FIG.8., disconnect the cable from the power outlet and empty any remaining water.
-
KEEP THE BABY BOTTLE WARM: To maintain the temperature, leave the bottle inside the basket and with the knob positioned on the bottle position. The indicator light of the device will turn off and turn on continuously each time the temperature drops with respect to the selected setting, until the device is manually turned off or when the water inside it runs out.
WARMING OF BABY BOTTLES (CAR USE)
-
Insert the basket and if necessary the adapter ring. See FIG.1.
NOTE: If the adapter ring does not fit loosely around the bottle, do not use. -
Fill the tank with water as indicated in the car WARMING table. Do not overflow.
-
Place the bottle without the teat and protective cap inside the bottle warmer.
-
Rotate the knob to the bottle position. See FIG.10. The light turns on to indicate that the warming cycle is still on or a cycle is running.
-
Remove the jar from the basket only when the indicative time shown in the Warming Table has ended.
-
Shake the bottle slowly to distribute the heat evenly. Pour a few drops on the back of your hand to make sure that the temperature of the milk is not too high before feeding the baby.
-
When the baby bottle has been removed, turn the knob to the OFF position. See FIG.8., disconnect the cable from the power outlet and empty any remaining water.
-
KEEP THE BABY BOTTLE WARM: To maintain the temperature, leave the bottle inside the basket and with the knob positioned on the bottle position. The indicator light of the device will turn off and turn on continuously each time the temperature drops with respect to the selected setting, until the device is manually turned off or when the water inside it runs out.
WARMING OF BABY FOOD JARS (ONLY FOR HOME USE)
- Insert the basket.
- Remove the food jar cover. Place the jar inside the basket and fill the tank, as indicated in the Table, with enough water to reach the same level of the jar. Do not allow the water to enter the jar.
- Rotate the knob to the jar position. See FIG.6. The light turns on to indicate that the warming cycle is still on or a cycle is running.
- If necessary, remove the basket slightly and mix the contents of the jar, so as to equalize the temperature.
- Remove the jar from the basket only when the indicative time shown in the Food Jar Warming Table has ended.
- Once the jar has been removed, turn the knob back to OFF position. See FIG.8., disconnect the cable from the power outlet and empty any remaining water.
FAST WARMING
This bottle warmer has a fast warming function that will warm the bottles and jars in a shorter time.
-
Insert the basket and if necessary the adapter ring. See FIG.1.
NOTE: If the adapter ring does not fit loosely around the bottle, do not use. -
Fill the tank with water as indicated in the FAST WARMING Table. Do not overflow.
-
Place the bottle without the teat and protective cap inside the bottle warmer.
-
Rotate the knob to the bottle position. See FIG.7. The light turns on to indicate that the fast warming cycle is on or a cycle is running.
-
When the indicative time specified in the table ends, remove the baby bottle from the device. Taking care not to burn yourself.
-
Shake the bottle slowly to distribute the heat evenly. Pour a few drops on the back of your hand to make sure that the temperature of the milk is not too high before feeding the baby.
-
Once the baby bottle has been removed, turn knob back to OFF position. See FIG.8., disconnect the cable from the power outlet and empty any remaining water.
CONSECUTIVE CYCLES
This device has been designed to allow consecutive cycles without having to
wait for the heating plate to cool. Change the water between one use and the
next.
NUTRITIONAL VALUES OF BREAST MILK
This device has been designed to gently heat milk and prevent overheating in
order to retain breast milk nutrients. By following the Table of Volumes and
Times shown in the manual, a suggestive temperature of 37° is ideal for
administering food to the child.
CLEANING
Disconnect the bottle warmer from the main power supply. Only clean once the
warmer has cooled down. Clean the container and the outside part with a damp
cloth. Do not use strong cleaning liquids. To reduce sediment deposits will
recommend using bottled, filtered or previously boiled water.
NOTE
To remove limescale sediments it is recommended to mix 50ml of white alcohol
vinegar with 50ml of plain water or dissolve a dose of citric acid in 200ml of
cold water. Pour the solution into the device. Leave the solution to act until
the limescale is completely dissolved. Do not use the device during this
period. Repeat the cleaning operation in the presence of limescale or whenever
the performance of the product appears less efficient.
WARRANTY -TERMS AND CONDITIONS
This product benefits of a warranty of 24 months on material and manufacturing defects, starting from the date of purchase (see sales slip). The warranty of 24 months does not include damages caused by the usual use of parties identified as “consumable” (e.g., batteries, brush heads or parts subject to usury). The legal guarantee of 24 months is void if: 1. The product has undergone aesthetic damage due to improper use not in accordance with instructions in the manual. 2. This product has been modified and/or tampered with. 3. The cause of the failure was due to poor maintenance of the individual components and/or accessories and/or supplies (e.g. oxidation and/or scaling due to the retention of water or other liquids, sediment blocking the sensor, leak of corrosive liquid from batteries). The following is excluded from the legal guarantee of 24 months: 1. Costs related to replacements and/or repair of parts subject to wear or costs for ordinary maintenance of the product. 2. The costs and risks involved in ransporting the product to and from the store where you purchased or otherwise authorized collection centre to receive the products under warranty. 3. Damage caused by or resulting from improper installation or improper use not in accordance with the directions in the instruction manual. 4. Damage due to natural disasters, accidental events or adverse conditions not compatible with the product. 5. Defects that have a negligible effect on product performance. The manufacturer, distributor and all the parties involved in the sale do not assume any liability for losses and economic damage from any malfunction of the product. In accordance with current regulations the manufacturer, distributor and all the parties involved in the sale are not responding in any case for damages, including direct, indirect ones, loss of net income, loss of savings and additional damage and other details consequences going beyond the damage caused by the breach of warranty, contract, strict liability, wrongdoing or due to other causes, resulting from the use or inability to use the product and/or paper and electronic documents, including the lack of service. For further information on the help service visit the website www.nuvitababy.com
EPROTECT YOUR PRODUCT FROM DAMAGE CAUSED BY LIMESTONE
Limestone, when it crystallizes, can irreparably damage your product. Having a
high insulating power, when it accumulates it may not heat the water
adequately or the product may suddenly switch off without having finished the
selected setting, making its performance less efficient. Also, did you know
that limestone deposits are an ideal medium for the formation of bacteria and
other unwanted microorganisms? Exact! That’s right!
Limestone deposits have a rough and uneven surface, therefore the small
cavities that form between the crystals are the perfect place for bacteria to
take root. Protect your child from potentially dangerous substances that would
become trapped in limestone if not removed regularly.
LIMESTONE CLEANING TIPS:
- Unplug the appliance before cleaning it.
- For easy cleaning of your device, we recommend that you descale it with white alcohol vinegar or citric acid.
- Mix 50 ml of white alcohol vinegar with 50 ml of plain water or dissolve a dose of citric acid in 200 ml of cold water. Pour the solution into the appliance. Leave the solution to act until the limestone is completely dissolved; do not use the device during this period. At the end of the cleaning, remove the liquid, rinse the device thoroughly and dry with a soft cloth.
- Repeat the cleaning operation in the presence of limestone or whenever the product performance appears less efficient.
The Nuvita 1165 Digital Bottle Warmer product and design are trademark by
Anteprima Brands International,
1, St. Luke’s Street, Gwardamangia, PTA1020 Pieta, Malta, Europe.
www.nuvitababy.com
China. Made in China.
Home use: 220V-240V / 320 Watts
Car use: 12V/100 Watts