Pulsar Xlite V3 eS Gaming Mouse User Guide

Pulsar Xlite V3 eS Gaming Mouse

Specifications

• Maximum Dongle Distance: 50cm for stable performance
• LED Indicator: Yellow color

Product Usage Instructions

Dongle Pairing
Position the dongle within 50cm of the mouse, ensuring no obstacles are in between.

Dongle LED ON/OFF
Press and hold the buttons as shown in the image for 3 to 4 seconds to make the LED indicator blink in a yellow color.

Debounce Time Setting

1. Hold the Polling Rate button and click the DPI button to switchDebounce Time.
2. OLED will display the current set value, hiding other set values.
3. After setting, wait 1 second for OLED to display the current overall setting value.
4. Wait an additional 3 seconds for OLED to turn off.

DPI Setting

1. Press the DPI button to activate the OLED display showing the current configuration.
2. Press again to adjust the DPI setting exclusively displayed on OLED.
3. After configuration, wait for 3 seconds for the OLED to display the current settings.
4. Wait an additional 3 seconds for the OLED to turn off automatically.

Polling Rate Setting

1. Press the Polling Rate button to activate the OLED display showing the current configuration.
2. Press again to adjust the polling rate setting exclusively displayed on OLED.
3. After configuration, wait for 3 seconds for OLED to display the current settings.
4. Wait an additional 3 seconds for OLED to turn off automatically.

LOD (Lift off Distance) Setting

1. OLED will display the current settings.
2. Adjust the LOD setting displayed exclusively on OLED.
3. After configuration, wait for 3 seconds for OLED to display the current settings.
4. Wait an additional 3 seconds for OLED to turn off automatically.

Motion Sync Setting

1. OLED will display the current settings.
2. Adjust the ‘Motion Sync’ setting displayed exclusively on OLED.
3. After configuration, wait for 3 seconds for the OLED to display the current settings.
4. Wait an additional 3 seconds for the OLED to turn off automatically.

INSTALLATION

• A USB-C Port
• B Left Mouse Button
• C Right Mouse Button
• D Scroll Wheel
• E Forward Button
• F Back Button
• G LED Indicator
• H PTFE Skates
• I Power On/Off Switch
• J DPI Button
• K Optical Sensor
• L Polling Rate Button
• M OLED Display

Requirement

• Intel® Core™ i5 or Higher CPU
• AMD Ryzen™™ 5 or Higher CPU
• USB 3.0 or higher Port

LED INDICATOR

WIRELESS

• RED BLINKING
  Low Battery – Battery level below 30%

• YELLOW BLINKING
  Yellow Blinking – Mouse Pairing Mode

WIRED

STEADY RED
Charging

STEADY BLUE
Fully charged

Before Pairing Dongle

• Maximum Dongle Distance for Stable Performance
• Position the dongle within 50cm of the mouse, ensuring there are no obstacles in between.

Dongle Pairing Mode

Press and hold the buttons as shown in the image for 3 to 4 seconds; the LED indicator will then blink in a yellow color

Dongle LED ON/OFF

• Press and hold buttons 1, 2, and 3 for 5 seconds to adjust LED On/Off.

Debounce Time Setting

1. Hold the Polling Rate button and click the DPI button to switch Debounce Time. At this time, OLED will only display the current set value, other set values will be hidden.
2. After the setting is complete, wait 1 second, OLED will display the current overall setting value.
3. Wait another 3 seconds and the OLED will turn off.

Debounce Time Setting- Step Levels

DPI Setting

1. Press the DPI button to activate the OLED display. The OLED screen will show the current configuration.
2. Press the switch again to adjust the DPI setting. The OLED screen will now exclusively display the DPI value, hiding other settings.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds. and the OLED screen will automatically turn off.

DPI Setting – Step Levels

The DPI setting cycle in both directions.

1. Press the DPI button to activate the OLED display. The OLED screen will show the current configuration.
2. Press the switch again to adjust the DPI setting. The OLED screen will now exclusively display the DPI value, hiding other settings.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 2 seconds and the Ol ED screen will automatically turn off

Polling Rate Setting

1. Press the “Polling Rate” button to activate the OLED display. The OLED screen will show the current configuration.
2. Press the button again to adjust the polling rate setting. The OLED screen will now exclusively display the polling rate value, hiding other settings.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds, and the OLED screen will automatically turn off.

Polling Rate – Step Levels

The polling rate settings cycle back and forth.

LOD (Lift off Distance) Setting

1. Press the “Polling Rate” button to activate the OLED display. The OLED screen will show the current configuration.
2. While holding down the “Polling Rate Button,” adjust the LOD height value by pressing the right mouse button. During this process,the OLED screen will exclusively display the current LOD setting, concealing other settings.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds, and the OLED screen will automatically turn off.

LOD (Lift-Off Distance)- Step Levels

Motion Sync Setting

1. Press the “Polling Rate” button to activate the OLED display. The OLED screen will show the current configuration.
2. To enable or disable “Motion Sync,” hold down the Polling Rate Button and press the left mouse button. The OLED will display only the current setting value, hiding others.
3. After completing the configuration, wait for 3 seconds. The OLED screen will then display the current overall settings.
4. Wait an additional 3 seconds, and the OLED screen will automatically turn off.

Motion Sync – Step Levels

Join the Pulsar Discord Community

WARRANTY

2 YEAR WARRANTY

WASTE ELECTRICAL AND ELECTRONICS EQUIPMENT INFORMATION. (WE) Correct Disposal of This Product. This marking shown in this product should not be disposed of with other household wastes. To prevent possible harm to the environment or human health, please separate this from other types of waste and recycle it responsibly. Household users should contact either the retailer where they purchase this product or their local government office, for details of recycling. Business users should contact the supplier. This product should not be mixed with other commercial waste for disposal.

BATTERY WARNING Improperly replaced batteries may present a risk of leak or explosion and personal injury. Mistreated rechargeable batteries may present a risk of fire or chemical burns. Do not disassemble or expose to conducting materials, moisture, liquid, or heat above 54° C (130°F). Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not short circuit. Battery life varies with usage. Keep batteries away from children.

Removal Instruction for Battery Recycling

NEED ANY HELP?
Thanks for choosing Pulsar.
If you have any questions or comments, if you need any help with your products, please do not hesitate to contact us.
www.pulsar.gg/support

Global: www.pulsar.gg/support

FAQ

Need Any Help?
If you have any questions or need assistance with your product, please contact us at:

• Email: support@pulsargg.kr
• Website: www.pulsar.gg/support

References

• Support : pulsar gaming gears
• warranty information – Pulsar Gaming Gears

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>