Aisurun WF307723 Retro Sideboard Buffet Cabinet Storage Instruction Manual
- May 15, 2024
- Aisurun
Table of Contents
Aisurun WF307723 Retro Sideboard Buffet Cabinet Storage
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware that may have come loose inside the carton during shipment. Identify and count all hardware and compare with the hardware list below
ASSEMBLY
- Remove hardware from box and sort by size.
- Please check to see that all hardware and parts are present prior start of assembly.
- Please follow the attached instructions in the same sequence as numbered to ensure fast and easy.
WARNING
- Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
- This product is for home use only and not intended for commercial establishments.
- Two persons are required for assembly.
- Approximate assembly time: 1/2 hours
- Component parts and fittings contained in the box. Please sort out all parts before you begin to assemble the item. This is to make sure you always use the correct part
- It is STRONGLY RECOMMENDED that you ANCHOR this product.
- Toppling furniture can cause serious injuries and death.
- This product has not been fitted with an anchor strap.
- To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the anchor straps provided and appropriate fixings.
TOOLS NEEDED
PART LIST
HARDWARE LIST
Installation Instructions
Place the Cabinet in the desired location against the wall. Mark the position
of the attached Hooks on the wall and remove the Cabinet. Using one of the
remaining Hooks (A) as a template, Place the Hook (A) under the marks on the
wall and mark the two hole positions. Drill the holes for the Anchors (B) and
insert the Anchors (B) into the wall. Attach the remaining Hooks (A) to the
Anchors (A) with Screw (D). Fully tighten the screws. Return the Cabinet to
the selected position and connect the Hooks (A) together with
Plastic Tie (C ). Assembly is now complete.