AQUADECK welldana Inserted Beam Instruction Manual
- June 3, 2024
- AQUADECK
Table of Contents
AQUADECK welldana Inserted Beam
Inserted beam
Position the bracket 60 mm from the rear wall If skimmers are on the wall, take extra space
Pay attention:
Always use sealant when mounting the fasteners Take more distance at round
corners and skimmers entering the bath Minimal 30 mm)
Inserted beam with Cast-in elements
Position the Cast-in element 60 mm from the rear wall If skimmers are on the wall, take extra space
Inserted beam with Pre-assembled elements
Inserted beam with Pre-assembled elements
Inserted beam
Assembling the brackets and the inserted beam
- Inserted beam
- Drill the 6 mounting holes with drill 11 mm (80 mm deep)
- Mount the brackets with the gaskets (6x DIN933, 6x CI13.0840.1620, 6x Weco M8)
- Place the inserted beam and secure it (2x DIN912, 2x DIN9021)
Inserted beam with Cast-in elements
- Inserted beam with Pre-assembled elements
Mount the brackets with the gaskets (6x DIN912, 6x CI13.0840.1620
Place the inserted beam and secure it (2x DIN912, 2x DIN9021)
Pre-assembled elements for inserted beam
Inserted beam with Pre-assembled elements
Assembly of the Pre-assembled elements
Inserted beam
Cast-in elements for inserted beam
Cast-in elements inserted beam
Inserted beam
Documents / Resources
|
AQUADECK welldana Inserted
Beam
[pdf] Instruction Manual
welldana Inserted Beam, welldana, Inserted Beam
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>