VALORE BTi43 True Wireless Earbuds User Manual
- June 3, 2024
- Valore
Table of Contents
VALORE BTi43 True Wireless Earbuds
True Wireless Earbuds (BTi43)
Thank you for purchasing the Valore True Wireless Earbuds (BTi46).
- Splash-proof
- Touch controls
- USB-C charging
Important: Please read the user manual thoroughly before using your wireless earbuds.
Specifications
- Wireless range: 10m
- Battery capacity: Built-in 300mAh lithium battery
- (Charging case) : Built-in 30mAh lithium battery (Earbuds)
- Charging time: Approximately 1 hour
- Standby time: Up to 100 hours
- Playback time: Up to 4 hours
- Power input: DC 5V/1A
- Supports: A2DP, HFP, HSP, AVRCP, AAC
Package Contents
- True wireless earbuds
- USB-C charging cable
- Ear tips x 2 pairs
UNDERSTANDING THE PRODUCT
- Charging pins in case
- Charging base LED indicator
- USB-C charging port
- Multi-function touch area
- Earbuds LED indicator
- Charging pins on earbuds
- Microphone
START USING THE WIRELESS EARBUDS
Charging
- Charge the earbuds Put the earbuds in the charging case to charge.
- Charge the charging case Charge the charging case with USB-C charging cable provided.
Power on/off
Open the charging case and take out the earbuds, it will automatically turn on
or long press touch area for 2 seconds to power on. Put the earbuds into the
charging case, it will power off automatically or long press touch area for 4
seconds to power off.
Pairing both wireless earbuds (switched off)
Earbuds will connect to each other automatically. The main earbud will flash
red and blue alternately and the blue light of the auxiliary unit flases
slowly.
- Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
- Step 2 : Remove earbuds from charging case and wait for earbuds to pair with each other.
- Step 3: Connect to the earbuds by selecting ‘Valore BTi46” under the device list.
- Step 4: Connection successful
If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. For subsequent connection, when earbuds are removed from charging case, they will connect to device automatically. If you want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.
Single earbud use
Remove a single earbud and close the charging case. Turn on Bluetooth on your
mobile, find “Valore BTI46” and click to connect.
Wearing method
Attach ear caps to earbuds into ear canal and turn it gently until it does not
fall when it is comfortable to fit. Wrong wearing style and unsuitable ear
caps will affect the sound quality.
Function description
Charging Earbuds
| Put the earbuds in the charging compartment under low power condition, the
charging compartment will automatically charge the earbuds
---|---
Charging case LED light status indicator
| The charging bay itself charging LED indicator flashes red,
The charging compartment charges the earbuds and the LED indicator is steady white
Answer/hang up| Touch the earbuds 1 time on the ‘multi-function touch area’
Refuse answer the call| Long press the earbuds ‘multi-function touch area’ for
2 seconds
Music play/pause| Touch the earbuds 1 time on the ‘multi-function touch area’
next music| Double-click the right earbuds on the ‘multi-function touch area’
previous music| Double-click the left earbuds on the ‘multi-function touch
area’
Volume +
| Three-click the left earbuds on the ‘multi-function touch area’
Volume –
| Three-click the right earbuds on the ‘multi-function touch area’
Siri
| When using an iPhone, press and hold 2 seconds to start SIRI，with indication
sound, Touch 1 time again to exit SIRI
charging interface port| USB-C cable charging to charge the charging case
(DC5V/1A)
TECHNICAL SUPPORT & WARRANTY
- For Technical Support, email us at v.info@valore.sg.
- For Warranty Registration, visit www.valore.sg.
Cautions:
Read all the instructions and warnings carefully prior to using this product.
- Do not store the earbuds in a high temperature environment.
- Do not place the earbuds near a fire or other excessively hot environments.
- Do not expose this speakerto moisture or submerge it in liquid. Keep earbuds dry at all times.
- Do not attempt to charge the earbuds using any other method or connection other than the headset’s provided charging cable.
- Do not disassemble this earbuds or attempt to repair or modify it in any manner.
- Be cautious of excessive drops, bumps, abrasions or other impacts to this headset. If there is any damage to the earbuds such as dents, punctures, tears, deformities or corrosion, stop using the earbuds and contact us immediately via email at v.info@valore.sg, or return this product to the store where you have purchased it from.
- If the product produces an abnormal smell, high temperature (low temperature during normal use), discolours or changes shape abnormally, stop using the product and contact us immediately via email at v.info@valore.sg.
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”)
provided on this user manual are copyrighted or trademarked and are the
property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material
contained on the instruction manual may violate copyright laws, trademark
laws, laws of privacy and communications statutes. The trademarks, service
marks and logos used and displayed in the Materials are registered and
unregistered trademarks and service marks of Valore and others. All other
registered and unregistered company names, product names and marks mentioned
herein the (“Materials”) are the property of their respective owners and may
be trademarks or registered trademarks.
Inspired by Valore Singapore For full range of Valore products visit www.valore.sg