VALORE BTi47 True Wireless Earbuds User Manual

: June 3, 2024
: Valore

Table of Contents

BTi47 True Wireless Earbuds
UNDERSTANDING THE PRODUCT
START USING THE WIRELESS EARBUDS
TECHNICAL SUPPORT & WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

True Wireless Earbuds (BTi47)

Thank you for purchasing the Valore True Wireless Earbuds (BTi47).

BTi47 True Wireless Earbuds

USB-C charging
IPX5 waterproof earbuds
Touch controls
Zinc alloy charging case

Important: Please read the user manual thoroughly before using your wireless earbuds.

Specifications:

Wireless range: 10m
Battery capacity: Built-in 300mAh lithium battery (Charging case) : Built-in 30mAh lithium battery (Earbuds)
Charging time: Approximately 1 hour
Standby time: Up to 100 hours
Playback time: Up to 4 hours
Power input: DC 5V/1A
Supports: A2DP, HFP, HSP, AVRCP, AAC
Material: Zinc alloy + ABS

Package Contents:

True wireless earbuds
USB-C charging cable
Ear tips x 3 pairs

UNDERSTANDING THE PRODUCT

① Microphone
② Charging case LED indicator
③ Touch area
④ Ear cap| ⑤ Charging case LED indicator
⑥ Charging case
⑦ Charging interface
---|---

START USING THE WIRELESS EARBUDS

Charging
a) Charge the earbuds Put the earbuds in the charging case to charge.
b) Charge the charging case Charge the charging case with USB-C charging cable provided.
Power on/off
Open the charging case and take out the earbuds, it will automatically turn on or long press touch area for 3 seconds to power on.
Put the earbuds into the charging case, it will power off automatically or long press touch area for 4 seconds to power off.
Pairing both wireless earbuds (switched off)
Earbuds will connect to each other automatically. The earbuds LED will be flashing blue.
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
Step 2: Remove earbuds from charging case and wait for earbuds to pair with each other.
Step 3: Connect to the earbuds by selecting `Valore BTi47″ under the device list.
Step 4: Connection successful
If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. For subsequent connection, when earbuds are removed from charging case, they will connect to device automatically. If you want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.
Function description
Voice assistant
Touch the left or right earbuds three times gently.
Call

Answer a call:	Touch the left or right earbuds once gently.
Hang up:	Touch the left or right earbuds twice gently.
Reject a call:	Press and hold the left or right earbuds for 2 seconds.

Listen to the music

Play/Pause:	Touch the left or right earbuds twice gently.
I Previous:	Press and hold the touch area of the left earbuds for 2 seconds.
INext:	Press and hold the touch area of the right earbuds for 2 seconds
I volume+:	Touch the right earbuds once gently.
Ivolume- :	Touch the left earbuds once gently.

Reset

Delete the bluetooth name which you got connected before from your phone.
Touch the left and right earbuds for 5 times respectively. You will see red and blue light flash for 2 seconds at the same time. The earbuds will turn on. At the meantime, the earbuds are waiting for pairing. Within 10 minutes, it will finish connecting and the earbuds will flash blue light.
Reconnect the bluetooth with your phone

LED indicator

Earbuds indicator

TECHNICAL SUPPORT & WARRANTY

For Technical Support, email us at v.info@valore.sg.
For Warranty Registration, visit www.valore.sg.

Cautions:
Read all the instructions and warnings carefully prior to using this product.

Do not store the earbuds in a high temperature environment.
Do not place the earbuds near a fire or other excessively hot environments.
Do not expose this speakerto moisture or submerge it in liquid. Keep earbuds dry at all times.
Do not attempt to charge the earbuds using any other method or connection other than the headset’s provided charging cable.
Do not disassemble this earbuds or attempt to repair or modify it in any manner.
Be cautious of excessive drops, bumps, abrasions or other impacts to this headset. If there is any damage to the earbuds such as dents, punctures, tears, deformities or corrosion, stop using the earbuds and contact us immediately via email at v.info@valore.sg, or return this product to the store where you have purchased it from.
If the product produces an abnormal smell, high temperature (low temperature during normal use), discolours or changes shape abnormally, stop using the product and contact us immediately via email at v.info@valore.sg.

DISCLAIMER & TRADEMARKS

All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.
The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the (“Materials”) are the property of their respective owners and may be trademarks or registered trademarks.
Inspired by Valore Singapore For full range of Valore products visit www.valore.sg

Complies with
IMDA Standards DA102803

Inspired by Valore Singapore
For full range of Valore products visit www.valore.sg

Charging case Indicator light

Status| Indicator light
Charging| When charging, the indicator light will gradually become bright or dim. Power indicator: Red light: 5-35%; yellow light:35 -70%; green light:70-100%.
Earbuds charging| When put the earbuds into the charging box, the indicate light will be on correspondingly.