VALORE PD10 30000mAh Power Bank User Manual
- June 6, 2024
- Valore
Table of Contents
VALORE PD10 30000mAh Power Bank
Thank you for purchasing the Valore 30000mAh Power Bank.
Important: Please read the user manual thoroughly before using your Power
Bank.
Specifications
- Battery type: Polymer Lithium-ion
- Battery capacity: 30000mAh,114Wh
- Micro input: 5V/2A, 9V/2A, 12V/1.5A(max)
- USB-C input: 5V/2A, 9V/2A, 12V/1.5A(max)
- USB-C output: 5V/3A, 9V/2A, 12V/2A, 20V/2.25A(max)
- USB output 1: 5V/2A, 9V/2A, 12V/1.5A(max)
- USB output 2/3/4: 5V/2.1A (max)
- Charging time: 16 hours (5V/2A)
- Recharging cycle: 300 times cycle
- Operating temperature: 0ºC to 35ºC
- Material: ABS + PC
- Dimensions (H x W x D): 145 x 69 x 34mm
- Weight: 506g
Package Contents
- 45W-PD 30000mAh power bank
- USB to USB-C charging cable
- Soft pouch
PARTS LIST
1. Micro input
2. USB-C input / output
3. USB output 1
4. ⑤ ⑥ USB output 2/3/4
7. Power button / LED lights
START USING THE 45W-PD 30000MAH POWER BANK
Charging the power bank
Connect USB-C port (port ②)to the USB adaptor using the USB-C charging cable
provided. Or connect Micro port (port ①)to the USB adaptor using a Micro
charging cable.
The 4 LED lights (⑦) indicate battery power. When charging the power bank, the
LED lights show white lamp and display the power by point flash.
When the 4 LED lights are on, it indicates that the battery is fully charged.
When the charger is removed, the indicator goes off after 30 seconds and enters standby.
Note: using a standard 9V / 2A charger to fully charge the power bank before first use. This is to maximise the battery performance and prolonging the life of lithium ion batteries. Recharge your power bank once every three months when not in use or seldom used.
Button function
- Power off state: quick press the button once, the led lights will light on to show current power for 30 seconds, then power bank automatically enter standby.
- Discharging state: long press button for 5 seconds, the output power will turn off and power bank enter standby.
Discharging
Connect the power bank to your mobile device. The 4 LED lights will be all off
after full discharge. Remove the cable and Stop discharging, the LED lights
will be on for 30 seconds and then enter standby.
TECHNICAL SUPPORT & WARRANTY
- For Technical Support, email us at v.info@valore.sg
- For Warranty Registration, visit www.valore.sg
Cautions: Read all the instructions and warnings carefully prior to using this product.
- Do not dismantle or open the power bank
- Do not subject the power bank to mechanical shock such as crushing, bending, puncturing or shredding. Avoid dropping or placing heavy object on the power bank.
- Do not expose the power bank to water or other liquids
- Do not expose the power bank to hear and/or fire. Avoid storage in direct sunlight.
- Do not attempt to insert foreign objects into the power bank. Do not short-circuit the power bank by storing it haphazardly in receptacle where it may be short-circuited by other metallic or conductive objects.
- Do not use any charger* other than that specifically provided for use with the power bank. Battery usage by children should be supervised.
The charger may also be known as the adaptor, and is used to charge the power bank
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”)
provided on this user manual are copyrighted or trademarked and are the
property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material
contained on the instruction manual may violate copyright laws, trademark
laws, laws of privacy and communications statutes.The trademarks, service
marks and logos used and displayed in the Materials are registered and
unregistered trademarks and service marks of Valore and others. All other
registered and unregistered company
names,product names and marks mentioned herein the (“Materials”) are the
property of their respective owners and may be trademarks or registered
trademarks.
Inspired by Valore Singapore
For full range of Valore products visit www.valore.sg