VALORE BTi43 Gaming True Wireless Earbuds User Manual

VALORE BTi43 Gaming True Wireless Earbuds

Specifications: Package Contents:

• Wireless range: Up to 10m
• Earbuds battery type: Built-in 50mAh lithium battery
• Charging case battery type: Built-in 1000mAh lithium battery
• Charging time: Approximately 1.5 hours
• Playback/working time: Up to 4 hours
• Standby time: Up to 200 hours
• Support: A2DP/HFP/HSP/AVRCP/AAC
• Power input: DC5V/1A

Package Contents:

• Gaming true wireless earbuds x 1 pair
• USB-C charging cable x 1
• Eartips x 2 pair

UNDERSTANDING THE PRODUCT

1. Charging metal contact
2. Power LED indicator
3. Charging port
4. Left earbud
5. Right earbud
6. Microphone
7. LED indicator
8. Touch button

START USING THE WIRELESS EARBUDS

Charging

• Charge the earbuds:
  Put the earbuds in the charging case, orange LED light is on when charging.Orange LED light off after fully charged. The earbuds and charging case enters sleep mode.

• Charge the charging case:
  Charge the charging case with USB-C charging cable. The power LED indicator will show the current power status.

Pairing both wireless earbuds (switched off)
Earbuds will connect to each other automatically. One earbud green LED will flash every 5 secs, the other earbud green and orange LED flickers alternately.

• Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
• Step 2: Remove earbuds from charging box and wait for earbuds to pair with each other.
• Step 3: Connect to the earbuds by selecting ‘Valore BTi43” under the device list.
• Step 4: Connection successful.

If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. For subsequent connection, when earbuds are removed from charging case, they will connect to device automatically. If you want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.

Controls:

• Power on:
  Remove earbuds from charging case and it will turn on automatically or long press the touch button for 3 secs to turn on.

• Power off:
  Put earbuds in the charging case or long press the touch button for 5 secs to turn off.

• Volume adjustment:
  Vol + : Short press touch button on right earbud, Vol – : Short press touch button on left earbud.

• Music selection:
  Previous track: Long press touch button on left earbud , Next track: Long press touch button on right earbud.

• Play/Pause/Answer call:
  Music pause: Double press touch button
  Music play: Double press touch button
  Answer call: Double press touch button
  Hang up call: Double press touch button
  Refuse a call: Long press touch button for 2 secs
  Voice assistant: Press touch button 4 times when earbuds and mobile are connected and not in a call.

LED Indicator Light Description

LED light goes out when fully charged
fully charged
Charging case Charging| (4.20V): four LED lights on 75%-fully charged: the first three LED lights are on and the fourth light is flashing 50%-75%: the first two LED lights stay on, the third LED ght flashes
25%-50%o: the first LED light is on and the second LED light is flashing
<25%: only the first LED light is on
Charging Case Charging for
Earbuds| 75%: four LED lights on
50%-75%: the first three LED lights are on and the fourth light goes out fourth lights go out
3%-25%: the first LED light is on, the last three LED
lights go out
0%-3%: the fırst light flashes and the last three lights go out

Game mode:

After earbuds are connected to device, tap the touch button of any side 3 times. The LED breathing light will show orange, the game mode will be turned on. If you tap the touch button again for 3 times, the LED breathing light will show green, the game mode will be switch off.

TECHNICAL SUPPORT & WARRANTY

For Technical Support, email us at v.info@valore.sg.
For Warranty Registration, visit www.valore.sg.

Cautions:

Read all the instructions and warnings carefully prior to using this product.

• Do not store the earbuds in a high temperature environment.
• Do not place the earbuds near a fire or other excessively hot environments.
• Do not expose this speakerto moisture or submerge it in liquid. Keep earbuds dry at all times.
• Do not attempt to charge the earbuds using any other method or connection other than theheadset’s provided charging cable.
• Do not disassemble this earbuds or attempt to repair or modify it in any manner.
• Be cautious of excessive drops, bumps, abrasions or other impacts to this headset. If there is any damage to the earbuds such as dents, punctures, tears, deformities or corrosion, stop using the earbuds and contact us immediately via email at v.info@valore.sg, or return this product to the store where you have purchased it from.
• If the product produces an abnormal smell, high temperature (low temperature during normal use), discolours or changes shape abnormally, stop using the product and contact us immediately via email at v.info@valore.sg

DISCLAIMER & TRADEMARKS

• All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.
• The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered
  trademarks and service marks of Valore and others. All other registered and unregistered company names,
  product names and marks mentioned herein the (“Materials”) are the property of their respective owners and
  may be trademarks or registered trademarks.

References

• Valore | Mobility and Lifestyle Goods

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>