HAVIT HV3665T-BLK Luxe and Mia Wall Light Instruction Manual
- June 4, 2024
- havit
Table of Contents
HAVIT HV3665T-BLK Luxe and Mia Wall Light
Luxe & Mia Wall Light Installation Instructions
Product Specifications
Model No.| HV3661T-BLK| HV3661T-WHT| HV3665T-BLK| HV3665T-WHT
Name| Luxe| Mia
Material| Aluminium
Colour| Black| White| Black| White
IP Rating| IP54
Protection Class| 1 240v Requires Earth
Input Voltage| 240v AC
Lamp Base| Built in LED
Lamp Wattage| 1x 9w
Colour Temp| TRI Colour – 3000k, 4000k, 5500k
Lumens| 400lm, 425lm, 500lm
CRI| > 80
Wiring| Parallel
Dimmable| No
Warranty| 3 Years Replacement
HV3661 Dimensions
HV3661 Mounting Base Dimensions
HV3665 Dimensions
HV3665 Mounting Base Dimensions
Important Safety Issues
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- Aluminum and 304SS fittings must not be installed within 5km of any salt water environments.
- All orings and seals must be in place correctly to maintain warranty
- This form may be updated at any time due to product improvements, please check online installation form for most current version.
Steps for Installation
- Make sure that the electrical circuit is free of voltage master switch off.
- Remove base plate from fitting.
- Loosen allen screws from side of fitting.
- Install base plate to wall in desired location using appropriate screws for application.
- Seal all holes including cable entry and around screws.
- Connect the cable – Use wire with earth; connect the earth first, then live and neutral wire.
- Fitting is preset to 3000k, to change slide switch located inside base of fitting to desired colour temperature.
- Reattach fitting to base plate making sure allen screws are tight to avoid any water penetration.
- Apply silicon around edge of fitting to prevent any water from getting inside to electrical connections.
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Must be installed by a licensed electrician
Contact Details
143 Beauchamp Road Matraville NSW 2036 Australia Tel: 02 9381 8300, Fax: 02 9666 8881, Email: sales@havit.com.au Web: www.havit.com.au
Warranty Terms & Conditions
Additional Information
Documents / Resources
|
HAVIT HV3665T-BLK Luxe and Mia Wall
Light
[pdf] Instruction Manual
HV3665T-BLK, Luxe and Mia Wall Light, HV3665T-BLK Luxe and Mia Wall Light, Mia
Wall Light, Wall Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>