VALORE AC154 Rechargeable Laser Distance Meter User Manual
- June 5, 2024
- Valore
Table of Contents
VALORE AC154 Rechargeable Laser Distance Meter
Rechargeable Laser Distance Meter (AC154)
Thank you for purchasing Valore Rechargeable Laser Distance Meter (AC154).
- Distance, area, volume & pythagorean measurement
- Durable & portable
- High-precision
Important: Please read the user manual thoroughly before using your distance meter.
Specifications:
- Battery type: Lithium battery
- Measuring range: 0.05 – 40m
- Material: Aluminium
- Dimensions (L x W x H): 100 x 32 x 18mm
- Weight: 65g
Package Contents:
- Rechargeable laser distance meter x 1
- USB cable x 1
- Strap x 1
UNDERSTANDING THE PRODUCT
- ON
- Area/Volume/Pythagorean
- Rear/Front-end unit
- C/OFF
- +/-/U
START USING THE LASER DISTANCE METER
Functions
-
ON
- Power ON
- Start single/continous measurement
-
Area/Volume/Pythagorean
-
Area measurement
Short press key until square icon is shown. Press ON, the first edge is measured. Press ON again to finish second edge measurement. The device will calculate automatically and results will be shown in the main displaying area. -
Volume measuerment
Short press key until cube icon is shown. Press ON to finish the measurement on the three edges respectively. The device will perform th volume calculation automatically and results will be shown in the main displaying area. -
Pyhthagorean measurement
This is mainly used to calculate target distance that cannot be directly measurerd.
Short press key until triangle appears on the display. According to the screen prompts, press the ON key to complete the measurement from right angled edge to right-angled edge edge or hypotenuse to right-angled edge, respectively. After the measurement is completed, the device will automatically perform the Pythagorean calculation, and the results will be displayed in the main display area.
-
-
Rear/Front-end unit Rear/Front-end baseline
-
C/OFF
- Power OFF
- Clear data
-
+/-/U
- add/minus data
- Unit switch
Icon Detail
Operating
ON/OFF
OFF ON
A long press on the button will turn on the device
ON-OFF
A long press on the button will turn off the device
Warm Tips
While there is no operation for 15 seconds when the laser is on, the laser
will automatically turn off
While without any operation for 30 seconds under the power-on status, the back
light of display shall be off automatically
While there is no further button operation for 45 seconds under the power-on
status, the device shall be shut down automatically.
Device Unit
Long press on button can switch the unit circularly,The last display unit
will be memorized when shut-down.
Self calibration function
In the shutdown mode→Long press the key until “boob” is displayed→long press
again the key until “CRL” is displayed→short press the key into add subtract
range with-7-7mm as adjustment→short press the key into save settings when the
calibration is completed.
Sound setting
In the shutdown mode→Long press the “ON” key until “boob” is displayed→long
press the “ON” key until “CRL.”is displayed→Long press the “ON” key until the
“BP.on” is displayed→Click the “ON” key to adjust sound On/Off→Press the “OFF”
button to save the operation.
Signal strength indication
In the shutdown mode→Long press the “ON” key until “boob” is displayed→long
press the “ON” key until “CRL.”is displayed→Long press the “ON” key until the
“BP.on” is displayed→Click the “ON” key to adjust sound On/Off→Press the “OFF”
button to save the operation. Short Press on button,the last measurement will
be canceled. While using the same function or single measurement to the area
or volume etc), the clear-off button can be used to eliminate last measuring
operation and arrange the measurement once again.
C OFF /
While all the segment code of signal are displayed, it means that there shall
be the stronger echo signal strength of measurement; while less segment code
was displayed, it shall mean the relatively reduced echo signal strength of
measurement
Reference edge
The default reference edge of the instrument is the rear segment of the
instrument.Short press key can switch the reference edge
Measurement
Single measurement
When the laser is off,short press the b utton to turn on the laser,and the
laser icon on the screen will be flashing,with short press bu tton again it
shall start measurement.The device will display the measurement result
automatically.
Continuous measurement
Press th e button shortly to turn on the laser. Press the bu tton for about 2
seconds to start continuous measurement. Press the button again shortly to
stop continuous measurement During continuous measurement, the main display
area displays the real-time measured value, and the auxiliary display area
displays the max and min value during the measurement.
TECHNICAL SUPPORT & WARRANTY
-
For Technical Support, email us at v.info@valore.sg.
-
For Warranty Registration, visit www.valore.sg.
Cautions:
Read all the instructions and warnings carefully prior to using this product. -
Do not store the camera in a high temperature environment.
-
Do not place the camera near a fire or other excessively hot environments.
-
Do not expose this camera to moisture or submerge it in liquid. Keep camera dry at all times.
-
Do not attempt to charge the camera using any other method or connection other than the camera’s provided charging cable.
-
Do not disassemble this camera or attempt to repair or modify it in any manner.
-
Be cautious of excessive drops, bumps, abrasions or other impacts to this camera. If there is any damage to the camera such as dents, punctures, tears, deformities or corrosion, stop using the camera and contact us immediately via email at v.info@valore.sg, or return this product to the store where you have purchased it from.
-
If the product produces an abnormal smell, high temperature (low temperature during normal use), discolours or changes shape abnormally, stop using the product and contact us immediately via email at v.info@valore.sg.
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”)
provided on this user manual are copyrighted or trademarked and are the
property of Challenger Technologies Limited. Any unauthorized use of any
material contained on the instruction manual may violate copyright laws,
trademark laws, laws of privacy and communications statutes.
The trademarks, service marks and logos used and displayed in the Materials
are registered and unregistered trademarks and service marks of Valore and
others. All other registered and unregistered company names, product names and
marks mentioned herein the (“Materials”) are the property of their respective
owners and may be trademarks or registered trademarks.