FUFU GAGA LJY-KF260076-01 Modern Contemporary White TV Cabinet Instructions

FUFU GAGA LJY-KF260076-01 Modern Contemporary White TV Cabinet

Important Information

Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.

• Version: 03/03/2023

Avoid Scratches:
In order to avoid scratching this furniture should be assembled on a soft layer – could be a rug.

Improve Efficiency:
Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

Anti-Topple Warning:
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

Important: Please prepare the following tools:

• CL x 3
• DL x 3
• DR x 3
• CR x 3
• A x 20
• 300mm B x 20
• 300mm C x 20
• 300mm D x 12
• E x 30 (6x35mm)
• F x 18 (14x9mm)
• G x 1 (6x30mm)
• H x1 (4x35mm)
• J x 12 (3.5x12mm)
• K x 1
• L x 12
• M x 6 (3x12mm)

Product Usage Instructions

1. Insert quick-fit screw (A) into plates 11, 12, and 13 with a screwdriver as shown. Do this for all 12 screws.
2. Fix plates 8 and 9 to plate 7 with screw (D) as shown. Do this for all 12 screws.
3. The slide plate 10 along grooves at first. Attach plates 11, 12, and 13 respectively to the drawer component, put cam lock (B) into holes in plate 8, 9 and turn clockwise to tighten as shown. Do this for all 12 screws.
4. Fix runner (DL) and (DR) to plates 8 and 9 respectively with screw (E) as shown. Do this for all 6 screws.
5. Fix slide rail (CL) to plates 3, 4, and 5 with screw (E) as shown. Fix slide rail (CR) to plates 6, 4, and 5 with screw (E) as shown. Please note, the two slide rails in plate 4 and 5 are not at the same level. Do this for all 18 screws.
6. Insert quick-fit screw (A) into corresponding holes in plate 1 with a screwdriver as shown. Do this for all 8 screws.
7. Insert wooden dowel (C) into plates 3, 4, 5, and 6, then attach to plate 1. Put cam lock (B) into holes in plates 3, 4, 5, and 6 and turn clockwise to tighten as shown. Do this for all 8 screws.
8. Insert wooden dowel (C) into plates 3, 4, 5, and 6 again, then cover plate 2 and fix with screw (D) as shown. Do this for all 8 screws.
9. Fix part (H) to plate 1 with screw (F) as shown. Fix part (G) to plates 1, 3, and 6 with screw (F) as shown. Do this for all 17 screws.
10. Stick light strip (K) to plate 2 as shown.

Caution

IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or use this product. follow the manual thoroughly and keep it for further reference.

AVOID SCRATCHES!
In order to avoid scratching this furniture should be assembled on a soft layer-could be a rug.

IMPROVE EFFICIENCY!
Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

ANTI-TOPPLE WARNING!
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fit your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT!
It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly,and once every 3 months – in order to assure stability throughout the lifespan of the product. For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

Tools

Please prepare the following tools

Parts

When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size .

Installation

1. Insert quickfit screw(A) into plates 11, 12, and 13 with a screwdriver as shown.
2. Fix plates 8 and 9 to plate 7 with screw(D) as shown.
3. The slide plate 10 along grooves at first. Attach plates 11, 12, and 13 respectively to the drawer component, put cam lock(B) into holes in plates 8, 9 and turn clockwise to tighten as shown.
4. Fix runner(DL) and (DR) to plates 8 and 9 respectively with screw(E) as shown.
5. Fix slide rail(CL) to plates 3, 4, and 5 with screw(E) as shown. Fix slide rail(CR) to plates 6, 4, and 5 with screw(E) as shown. Please note, the two slide rails in plates 4 and 5 are not at the same level.
6. Insert quickfit screw(A) into corresponding holes in plate 1 with a screwdriver as shown.
7. Insert wooden dowel(C) into plates 3, 4, 5, and 6, then attach to plate 1. Put cam lock(B) into holes in plate 3,4,5,6 and turn clockwise to tighten as shown.
8. Insert wooden dowel(C) into plates 3, 4, 5, and 6 again, then cover plate 2 and fix with screw(D) as shown.
9. Fix part(H) to plate 1 with screw(F) as shown.
10. Fix part(G) to plates 1, 3, and 6 with screw(F) as shown.
11. Stick light strip(K) to plate 2 as shown.
12. Using part(M) to fix light strip with screw(L) as shown.
13. Drill holes on the wall, and knock plastic part(J) into. Fix the cabinet to the wall with screw(J) as shown.
14. Align rails, and slide drawers into corresponding positions.

WARRANTY

WARRANTY CLAIMS

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
• Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange it within 48 hours. If there is out of stock, we will reply with a shipping date.
• The product must be used in accordance with the instructions provided. For health reasons.
• For other reasons, if the furniture needs to be returned, it must be cleaned and dried, and operated within 30 days of receipt.

Type of Warranty Claim

• Failure to follow the furniture instructions will invalidate the warranty. Attention, please.
• Does not include damage during installation, but includes damage during transportation.

Scope of responsibility

• Shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
• After use, the damage and scratches of the furniture are not covered by the warranty.

The Warranty Relates to All Bought in The Us and Covers The Following Areas

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

RETURNS

CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

• If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.

DEFECTIVE ITEMS

• If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.

DAMAGED ITEMS
If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer. In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>