SoundBound A3263 Soundbuds True Wireless Earbuds User Guide
- June 3, 2024
- SoundBound
Table of Contents
Sound Bound A3263 Sound buds True Wireless Earbuds
•Please note when removing TWS Buds for the first time from packing, sometimes the built In battery Is completely drained or not charged up. Please place on charger & leave plugged in for 25-30 minutes & LED light will start blinking to Indicate charging. if LED light does not light up at first please allow up to 30 minutes plugged in to charger.
What’s Included
- Sound Bound Sound buds TWS Earbuds
- Type-C Cable
- User Manual
- 1 Year limited warranty against defects
Charging
Before using your Sound Bound Wireless Stereo Headphones, please charge using
the included USS cable. Please note: Most USB chargers are compatible with
Sound Bound Wireless Stereo Headphones. For optimal AC charging, please use a
1.0A USB Charger.
When the earbuds are charging in the charging case, the earbuds will light up
red until fully charged.
The LED light indicator on the front of the charging stand indicates the power
of the charging case.
1 light:25%
2 lights:50%
3 lights:75%
4 lights: 100%
When charging stand is charging, the lights will be blinking until fully
charged.
On/Off & Pairing
Upon first Use: Remove the earbuds from the charging case, the earbuds will
Power ON automatically and you will hear “power on” sound from the earbuds.
If you do not hear the announcement, please turn on the earbuds by pressing
down on the top & holding your finger firmly on the left or right earbud for
about 5 seconds until you hear 11power on.
Once the earbuds power on, it will automatically place the earbuds into
pairing mode and you will hear 11Pairing”.
Next, look for “SOUNDBUDS TWS” in the Wireless menu on your wireless device
and select it. The earbuds will automatically connect & you will hear
“Connected” once the earbuds are connected successfully with your wireless
device.
After first time use, the earbuds will automatically connect to the last
paired wireless device when the earbuds power on. Please ensure Bluetooth is
powered on, on your mobile device.
Please note: {In case the battery voltage is too low, the earbuds will sound &
automatically shut dawn. If insufficient power is available, the 11:orbuds
will need to be recharged prior to powering bade on)
To Power off- tap and hold down your finger on the top of the left or right
earbud for 5 seconds until the red light blinks & the earbuds turns off. Place
the earbuds into the charging case, and the earphones will automatically shut
down & charge. The earbuds will automatically shut down after 5 minutes when
idle & disconnected.
Function & Phone call Operation
When the earbuds are powered on & connected with a wireless device, making &
answering phone calls is supported.
Please note : one side or bath sides of the 11:0rbuds can be used far
phone calls.
-
A short single tap one time on the “touch point” shown in the diagram of the earbud will answer calls when there is an incoming call.
-
A long firm press without releasing your index finger on the same “touch point” will reject an incoming call.
-
When on the phone call a short tap on the “touch point” once will hang up the phone call.
Volume Function Operation
- The volume can be raised by single tapping the “touch point” on the right earbud.
- Single tap the left earbud to lower the volume.
Please note: Volume can be adjusted from your mobile device as well by using the volume keys an your wireless device .
Music & Audio Playback Operation
- Once Earbuds are paired to your wireless device, they are ready for use.
- Double tap the “touch point” on either the left or right earbud to stop or pause music playback from your playlist.
- Tap and hold down the “touch point” on the left earbud for 1-2 seconds while playing music to skip to the previous track.
- Tap and hold down the “touch point” on the right earbud for 1-2 seconds while playing music to skip to the next track.
Triple tap the “touch point” on either left or right earbud to use the Voice Control on your mobile device.
Safety/ Care Instruction
- Please do not overuse ear buds or place under heavy pressure.
- Keep away from Water or wet areas
- Keep away from extremely hot or heated areas
- Keep away from Wi fi Router or other high frequency transmitting equipment to prevent signal interruption
- Please use Ear buds under working range of 10-15 meters from connected device with no obstacles to ensure best sound quality and effect.
- For use with any wireless enabled device
Overview
Specification
Style# : Sound Bound Sound Buds TWS Earbuds
Material: Plastic
Wire less Version 5.0 (Compatible with All versions up to 5.0)
Wireless Range l0M
Playtime: Up to 4 Hours
Earbuds Battery: 30mAhh
Case Battery: 250mAh
Input and Output: Type-C
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Radiation
Exposure Statement
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
2022 life ware Group, Sound Bound NY, NY 10018
The Bluetooth word mark & logos are owned by Bluetooth SIG, Inc. All other
trademarks & trade names are those of t heir respective owners. The
illustrated products may slightly differ from those supplied.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>