SoundBound Sonorous Wireless Bluetooth Speaker User Guide
- June 8, 2024
- SoundBound
Table of Contents
SoundBound Sonorous Wireless Bluetooth Speaker
What’s Included
- Sonorous Speaker
- Micro USB Charging cable
- User Manual
- 1 Year lim ited warranty against defects
Charging
Before using your Sound Bound Sonorous Speaker, please charge using the included micro use cable. Please note: Most USB chargers are compatible with SoundBound Sonorous Speaker. For optimal AC charging, please use a l.OA useCharger.
On/Off
Sonorous Speaker can be powered On or Off by a long press on the “Power
On/Off” Switch on the top of the Sonorous Speaker.
Pairing
- After switching the “Power On/Off” button, the Sonorous Speaker will Power On & automatically enter “Wireless Mode” for pairing. A blue light will rapidly blink at the top of the Sonorous Speaker.
- On your Mobile Device, search for the “Wireless Menu.” A list of available devices will show available for pairing. Select “Sonorous Speaker” & the speaker will automatically pair with your device for use.
- Once paired to your mobile device the Sonorous Speaker will automatically re-pair if shut down or powered off and back on.
Volume/ Audio Track Functions
- Raise Volume by long press multifunction button “Raise Volume/ Switch Tracks” or by pressing volume button on your mobile device
- lower Volume by long press multifunction button “Lower Volume/ Switch Tracks” or by pressing volume button on your mobile device
- Short press”< or>” multifunction button to switch tr acks forward or back
Switching between FM Mode & Wireless mode, Aux mode (For TF/SD/ USB Slot)
Single short press “Power On/Off/ M” function button to switch between various
mode setting on the Sonorous Speaker. Once desired mode is set, to switch to
other modes, tap again.
FM Mode Use
- When in FM Mode, single long press “Play/Pause” function button & wait about 1-2 minutes. The Sonorous Speaker will scan, search, &store, available FM Radio Stations. Once completed, the first station discovered will transmit FM Radio.
- To switch to the next stored station, short press “
” multifunction button.
Wireless Mode Use
- After Pairing mobile device, begin playing audio from mobile device to stream audio. Short single press “Play/Pause” function button to play or pause streaming audio.
- To switch to the next audio track, short press “< or>” multifunction buttons.
True Wireless Pairing
To enable True Wireless Pairing (streaming audio from your mobile device to two speakers, follow the steps below. Prior to connecting the speaker with any Mobile device, ensure both speakers are turned on. Next, long press the “M” button on either speaker to connect to the other one (does not matter which speaker is pressed). You will hear a sound alert announce to confirm the 2 speakers have paired successfully. Next you can proceed with pairing to your mobile device as described under “Pairing” & search for “Sonorous Speaker” to connect. You will hear a sound alert announce once your device has paired to the speakers successfully.(Please note-Sonorous Speaker will be displayed in the mobile device’s Wireless Menu as one device listed after pairing in True Wireless Mode). Once paired with your mobile device, streaming audio will play from both speakers
SPECIFICATIONS
- Style #.Sonorous Speaker
- Material : Plastic
- True Wireless 5.0
- Working Range 10M
- Battery Capacity 2000 mAh
- Power input: DCSV Micro USB Cable
- Supported Modes : SD Card Slot, TF Card Slot, USB
- Input, FM Radio, Wireless Mode
- Frequency Response Range 10OHz-20Khz
- Signal to noise ratio 84Db or higher
- Output Power 5W
- Speaker Specification 66mm x 1
- Playing Time Up to 6 Hours
- Charging Time 2.5 Hours
- Input Power Supply DCSV-500mAh
Playback Time mentioned may vary by user’s operation mode & device settings
OVERVIEW
