HUMAN ACTIVE TECHNOLOGY PWR-AC HAT REYA AC Unit with Power Supply Installation Guide

July 13, 2024
HUMAN ACTIVE TECHNOLOGY

HUMAN ACTIVE TECHNOLOGY PWR-AC HAT REYA AC Unit with Power Supply

Models:

PAR TS LIST

IMPORTANT SAFETY INSTRUCTIONS

WARNING – Risk of Electric Shock, Fire, and Injury.
To reduce the risks of burns, fire, electric shock, or injury to persons:

  • Always unplug this unit from the electrical outlet before installing or removing it.
  • Use only indoors.
  • Dry location use only.
  • Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
  • Never operate this unit if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
  • Do not install this unit near heated surfaces/sources.
  • Do not open the unit due to risk of electric shock hazard. No user serviceable parts inside.
  • Never drop or insert any object into any opening.
  • Connect this unit to a properly grounded outlet/receptacle only.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

MPE Requirements
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

PWR-AC

Features

  • 1 USB-A charger port
  • 1 USB-C charger port
  • Can charge laptop up to 65 Watts
  • Mount: Desk edge/surface mount,
  • under mount, edge mount
  • (Desk edge/surface mount: 0.5″ – 1.75″)

Specifications

  • Input: DC, 65W max from HAT Base Control Box
  • Output:
    • Single Port in Use:
    • USB-C: QC2.0, QC3.0, PD3.0, PPS, 65W max
    • USB-A: 5V/2A, 10W max
    • Both Ports In Use:
    • USB-C: 20V2.25A max
    • USB-A: 5V2A max
  • Compatible with HAT bases only

PWR-ACC

Features

  • 2 power receptacles
  • 1 USB-A charger port
  • 2 USB-C charger ports
  • Can charge laptop up to 65 Watts
  • Mount: Desk edge, 0.75″ – 1.75″
  • Conforms and tested to
  • UL 962A and UL 1310 standards
  • Tamper-resistant (TR) AC outlets
  • Integrated circuit breaker

Specifications

  • Input: 125VAC, 60Hz, 15A max
  • Output: AC Outlets (2): 120VAC, 60HZ, 15A max
    • Single port use:
    • USB-A: 5V3A, 9V2.A, 12V1.5, 18W max
    • USB-C1: 5V/3A, 9V3A, 12V3A, 15V3A, 20V3.25A;
    • PPS (3.3-11V4.05A, 3.3-16V3A, 65W max);
    • PD3.0, APPLE2.4A, DCP1.5A, QC2.0/3.0, AFC
    • USB-C2: 5V3A, 9V2.22A, 12V1.67A, 20W max
    • Multi port use:
    • USB-C1 + USB-C2: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-C2 max 20W (5V3A, 9V2.22A, 12V1.67A)
    • USB-C1 + USB-A: USB-C1 max 45W (5V3A, 9V3A,
    • 12V3A, 15V2.67A, 20V2.25A); USB-A max 18W (5V3A, 9V2.A, 12V1.5, 18W max)
    • USB-C2 + USB-A: Both share 15W
    • USB-C1 + USB-C2 + USB-A: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A);
    • USB-C2 & USB-A share 15W

PWR-ACC-WRLS

Features

  • 2 power receptacles
  • 1 USB-A charger port
  • 2 USB-C charger ports
  • Can charge laptop up to 65 Watts
  • Fast wireless charging
  • Mount: Desk edge, 0.75″ – 1.75″
  • Conforms and tested to
  • UL 962A and UL 1310 standards
  • Tamper-resistant (TR) AC outlets
  • Integrated circuit breaker

Specifications

  • Input: 125VAC, 60Hz, 15A max
  • Output: AC Outlets (2): 120VAC, 60HZ, 15A max
    • Single port use:
    • USB-A: 5V3A, 9V2.A, 12V1.5, 18W max
    • USB-C1: 5V/3A, 9V3A, 12V3A, 15V3A, 20V3.25A; PPS
    • (3.3-11V4.05A, 3.3-16V3A, 65W max), PD3.0,
    • APPLE2.4A, DCP1.5A, QC2.0/3.0, AFC
    • USB-C2: 5V3A, 9V2.22A, 12V1.67A, 20W max
    • Multi port use:
    • USB-C1 + USB-C2: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-C2 max 20W (5V3A, 9V2.22A, 12V1.67A);
    • USB-C1 + USB-A : USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-A max 18W (5V3A, 9V2.A, 12V1.5, 18W max)
    • USB-C2 + USB-A : Both share 15W
    • USB-C1 + USB-C2 + USB-A : USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A);
    • USB-C2 & USB-A share 15W; Wireless Charging: 5W, 7.5W, 10W, 15W (auto detection)

PWR-STRP

Features

  • 6 power receptacles
  • Conforms and tested to
  • UL 962A and UL 498 standards
  • Tamper-resistant (TR) AC outlets
  • Integrated circuit breaker

Specifications

  • Input: 125VAC, 60Hz, 15A max
  • Output: AC Outlets (6): 120VAC, 60HZ, 15A max

PWR-ACC-STRP-PWR-ACC-WRLS-STRP

Features

  • Power Strip: 6 power receptacles
  • Power Module: 2 power receptacles
  • 1 USB-A charger port
  • 2 USB-C charger ports
  • Can charge laptop up to 65 Watts
  • Fast wireless charging*
  • Conforms and tested to UL 962A, UL 1310, and UL 498 standards
  • Tamper-resistant (TR) AC outlets
  • Integrated circuit breaker

Specifications

  • Input: 125VAC, 60Hz, 15A max
  • Output, Power Strip: AC Outlets (6): 120VAC, 60HZ, 12A max
  • Output, Surface Mounted Power Module: AC Outlets (2): 120VAC, 60HZ, 15A max
  • USB:
    • Single Port Use
    • USB-A: 5V3A, 9V2.A, 12V1.5, 18W max
    • USB-C1: 5V/3A, 9V3A, 12V3A, 15V3A, 20V3.25A; PPS (3.3-11V4.05A, 3.3-16V3A, 65W max), PD3.0, APPLE2.4A, DCP1.5A, QC2.0/3.0, AFC
    • USB-C2: 5V3A, 9V2.22A, 12V1.67A, 20W max
    • Multi Port Use
    • USB-C1 + USB-C2: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-C2 max 20W (5V3A, 9V2.22A, 12V1.67A)
    • USB-C1 + USB-A: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-A max 18W (5V3A, 9V2.A, 12V1.5, 18W max)
    • USB-C2 + USB-A: Both share 15W
    • USB-C1 + USB-C2 + USB-A : USB-C1 max 45W (5V3A, 9V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A);
    • USB-C2 & USB-A share 15W Wireless Charging: 5W, 7.5W, 10W, 15W (auto detection)*

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

HUMAN ACTIVE TECHNOLOGY User Manuals

Related Manuals