INTELLINET 561204 8-Port Gigabit Ethernet PoE+ Switch Instructions
- June 3, 2024
- INTELLINET
Table of Contents
INTELLINET 561204 8-Port Gigabit Ethernet PoE+ Switch
This guide presents the basic steps to set up and operate this device. For specifications, visit intellinet-network.com. Register your product at register.intellinet-network.com/r/561204 or scan the QR code on the cover.
LEDs
The LED indicators make monitoring and troubleshooting easier. If a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
| LED | Status | Operation |
|---|---|---|
| Power | On | Power On |
| Off | Check connection; turn power on |
PoE
| On| Port is linked to PSE/PoE device
Blinking| PoE Overload
Off| No PSE/PoE device is linked
Link/Act
| On| Valid port connection
Blinking| Valid port connection; data transmitted/received
Off| No link established
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc. Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link, check the corresponding device for proper setup and operation.
- Ports 1 – 8 : 10/100/1000 Mbps ports, IEEE 802.3af/at compliant, providing a maximum of 30 watts to connected PoE devices. The total PoE budget for this switch is 60 watts, the per-port average power distribution is 7.5 watts.
- Port 1: The designated uplink port can be used the same way as any of the other ports, however, when port isolation (VLAN mode 1 or is active, this port remains accessible from all other ports. English
Instructions
Power
Use the included power adapter to connect the receptacle on the back of the
switch to a power outlet, and confirm that the Power LED lights.
VLAN Mode
The Intellinet 8-Port Gigabit PoE+ Switch (561204) features port isolation, also referred to as “Private VLAN”. It isolates all ports from each other and only allows access to the uplink port. This is useful, for example, if a private VLAN is a hotel where each room or apartment has a network port for Internet access. All ports can all access the Internet, but they cannot access each other.
| Mode | Operation |
|---|---|
| Normal | The switch operates as a standard Ethernet switch. All |
ports can communicate with each other.
VLAN1| Ports 2 – 8 are isolated from each other, but do have access to
port 1.
VLAN2| Ports 2 – 8 are isolated from each other, but do have access to
port 1. In
addition, the connection speed of ports 2 – 8 is limited to 10 Mbps.
Placement
Prior to use, place/position the switch:
- On a level surface that can support the weight of the switch (and any other items that need to be considered);
- With a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate ventilation;
- Away from electric-noise sources: radios, transmitters, broadband amplifiers, etc.;
- Where it cannot be affected by excessive moisture.
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product
- Intellinet Network Solutions Account and Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>