Vinsetto 921-675V80 Executive Massage Office Chair Instruction Manual
- July 30, 2024
- Vinsetto
Table of Contents
IN230700511V01_GL
921-675V70_921-675V80_921-675V90
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
SAFETY INFORMATION
-
The intended use:This product is intended for indoor use only.
Used for work and study. -
Maximum weight: 120 KG
-
To prevent the chair falling, make sure that the weight is evenly distributed.
-
Remove all parts from the box and make sure all parts are included before assembly.
-
Keep your feet always on the floor and do not press your head on the headrest when you recline the chair.
-
When you adjust the backrest, make sure your fingers are safe and out of harm’s way.
-
To avoid damage, never pull fast and strongly in your house.
-
This chair is designed to sit only and nothing else.
-
Don’t use it as a base or as a ladder.
-
Don’t sit in the arms of the chair.
-
This chair is designed to seat only one person at same time.
-
If some parts are missing, damaged or worn, stop using it immediately.
-
Avoid direct sunlight on the chair so that the plastic components won’t become brittle.
Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.
MAINTENANCE INSTRUCTIONS
- Clean with vacuum cleaner.
- Wipe with a fabric dampened with water.
PARTS
HARDWARE
NOTE
Do not confuse similar screws.Do not tighten bolts fully until all parts are connected!
I . Specifications of power adapter
Power on in standby state. The user can realize the function through the hand
controller controler control
Input :AC 100-240V, 50Hz/60HZ; Output: DC12V1A.
II. Productfeatures
- 3 Position 6 Vibration motor
- 5 motor vibration modes
- motor vibration intensity at 2 speed
- Add hot spots to one part
- The default shutdown duration is 15 minutes
III. Function details
-
Switch on and off<Boot vibration full on (default strong/automatic mode)>
-
Switch point by vibration intensity (strong/weak)
-
Click heating switch circulation
-
Vibration positioning key
By default, the vibration is fully on when the machine is started Sequence switch motor vibration in individual parts (back vibration — waist vibration—Leg vibration — full open) cycle -
Mode 1(Skip mode)
-
Mode 2(Press vibration mode)
-
Mode 3(Pulse vibration mode)
-
Mode 4(Wave vibration mode)
-
Mode 5(Conventional vibration mode)
US
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
UK
If you have any questions, please contact our customer care center. Our
contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA