ANHOME BD-648 20W USB C Dual Ports Fast Charger Block PD User Manual
- June 1, 2024
- ANHOME
Table of Contents
ANHOME BD-648 20W USB C Dual Ports Fast Charger Block PD
Product Information
Specifications
- Model: BD-648
- Type: 20W Type-C PD Wall Charger
- USB-C PD Output: 5V/3A, 9V/2.22A, 12V/1.67A
- USB-A PD Output: 5V/3A, 9V/2A, 12V/1.5A
- Features:
- Elegant, durable, heat eliminable design
- Over-load, over-voltage, over-current, and short-circuit protection
- Compact and unique appearance design
- Premium materials and built-in fail-safes for safety
Product Usage Instructions
Charging
Plug the 20W PD Wall Charger into a compatible power outlet. Connect your
device using the USB-C or USB-A port for fast charging.
Safety
Ensure the charger is used in a well-ventilated area and kept away from
moisture. Do not attempt to disassemble or modify the charger.
Troubleshooting
If you encounter any issues with the charger, refer to the user manual for
troubleshooting steps. Contact customer service for assistance if needed.
FAQ
-
Q: What should I do if the charger overheats?
A: Unplug the charger immediately and allow it to cool down before using it again. Ensure proper ventilation around the charger. -
Q: Can I use this charger with non-PD devices?
A: While designed for PD devices, you can still use this charger with non-PD devices, but the charging speeds may vary.
Thank you for choosing our products.
Please read carefully our User Manual before using it, if you have any problem
when using, please contact our customer service, we’ll solve it as soon as
possible.
And any suggestion warm welcomed
Product Overview
- Introduction 1.20W Type-C PD Wall charger
- USB-C PD Output: 5V/3A,9V/2.22A,12V/1.67A
- USB-A PD Output: 5V/3A,9V/2A,12V/1.5A
- Elegant, durable, heat eliminable.
- Over-load, Over-voltage, over-current and short circuit protection.
- Compact and unique appearance design by our own, without any gap.
- Guaranteed Safety: Premium materials and built-in fail-safes keep you and your device protected against shorts
Accessories
- 20W USB CHARGER 1EA
- Colour box 1EA
- User Manual 1EA
Appearance Description
- Technical Parameters
- Input Voltage: 100-240V~ 50/60Hz 0.5A
- USB-C PD Output: 5V/3A,9V/2.22A,12V/1.67A
- USB-A PD Output: 5V/3A, 9V/2A, 12V/1.5A
- Max Power: 20W Max
- Protection
- Output Short Circuit Protect: on a short circuit protection situation, our item will stop charging to protect devices
- Over Voltage Protection: The protection system will be started
Material
Plastic Housing: PC+ABS+Fireproof material
Appearance and Interface
- USB-C PD Output: 5V/3A,9V/2.22A,12V/1.67A
- USB-A PD Output: 5V/3A,9V/2A,12V/1.5A
Operation Instruction
As above picture shows, connect to alternating current AC 100-240V , and then
20W PD Charger will work. If without loading, its internal consumption is
about <300mW.
Our item is suitable to use in AC 100-240V constant alternating current if
higher or lower voltage is unsuitable
Brand: AnHome SmartHome
Manufactured: Shenzhen Baidu Electronics Co., Ltd
Model: BD-648