HOOVER CLEANSLATE Carpet and Upholstery Spot Cleaner User Guide
- June 3, 2024
- Hoover
Table of Contents
HOOVER CLEANSLATE Carpet and Upholstery Spot Cleaner
GETTING STARTED
- Remove Solution Tank from the unit.
- Add cleaning formula to Solution Tank using the ratio chart in manual and included measuring cup.
- Slide tank back into the unit. Unwrap hose from unit and attach preferred tool.
HOW TO USE
- SPRAY: Spray a generous amount of cleaning formula over stain by pressing the trigger behind the tool.
- SCRUB: Scrub the stain in a back-and-forth motion until you see bubbles.
- SUCTION: Apply downward pressure on the front of the cleaning tool and pull towards you to lift the stain. Repeat as needed.
TOOLS FOR EVERY MESS
- 7in WidePath Tool: Tackle stairs and larger messes in fewer passes.
- Tight Spot Tool: Clean crevices, corners, baseboards and other tough to reach areas.
- Hose Rinse Tool: Flush the hose with water to remove any left behind dirt & debris after use.
PRO TIP
- FOR BEST EXPERIENCE: Use formula ratio chart in manual when filling solution tank. Add water before formula.
- FOR BEST PERFORMANCE: Empty the tank, flush the hose, and rinse the tools after each use.
- WHEN FULL, THERE WILL BE A CHANGE IN OPERATING SOUND: Empty recovery tank promptly.
SCAN HERE
For more information on CleanSlate™ or to view this guide in other languages, scan the QR code.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>