NPYSVSSS 12 Inch Rain Mixer Shower System with Waterfall Tub Spout Instruction Manual
- May 15, 2024
- PYSVSSS
Table of Contents
INSTALLATION MANUAL
(3-way On-off Shower System)
Please do not hesitate to contact us with your questions, concerns and/or
problems, we’re here to help.
CustomerSupport: NPYSVSSS@126.com
Packing list
PRODUCT DIMENSIONS
(unit:mm) ![NPYSVSSS 12 Inch Rain Mixer Shower System with Waterfall Tub Spout
- Figure 5](https://manuals.plus/wp-content/uploads/2024/03/NPYSVSSS-12-Inch- Rain-Mixer-Shower-System-with-Waterfall-Tub-Spout-Figure-5.png)
ACCESSORIES LIST
Serial numeber | Designation |
---|---|
1 | Valve |
2 | Protective cover |
3 | Panel |
4 | Rubber ring |
5 | Knobs |
6 | Hexagon screw |
7 | Button |
Exploded view
Serial numeber | Designation |
---|---|
1 | Valve |
2 | Switch valve core |
3 | Check valve |
4 | Temperature valve core |
5 | “C” limiting stopper |
INSTALL SHOWER VALVE
Step 1: Determine the position of the valve. Then drill, hammer in the anchors, fasten the valve body to the wall. Step 2: Connect each takeover,then connect the water source to confirm that there is no leakage. Step 3: Adjust the embedded body to the horizontal line,and fix the embedded body on the wall with a cross screwdriver to lock the 4 self-tapping screws. Seal the pipeline with cement filler. Step 4: Balance the panel on the main body,Put on the knobs and accessories.
COMPLETE DIAGRAM
Something you may need to know: Align the marks on the temperature valve stem. Sleeve the plastic ring onto the valve stem with the “”C” shape opening facing the right.
INSTALL TUB SPOUT
- Remove the threaded inner tube using an Allen key.
- Wrap the sealing tape around the screw,Then screw the threaded inner tube counterclockwise into the water outlet.
- Insert the body part into the threaded inner tube and lock it with an Allen key.
INSTALL SHOWER SEAT
- Wrap supply elbow thread with Teflon tape and attach cover plate to it.
- Screw the shower holder clockwis onto te hand-shower outlet.
- Place rubber washers in both ends of the hose. Chnect the shower hose to the supply elbow and shower head.
Note the ends of shower hose to be connected correctly.
INSTALL OVERHEAD SHOWER
-
Set the decorative Cup on the shower arm.
Wall Mounted -
Wrap taflon tape on the longer end.
-
Tighten the shower arm clockwise on the water outlet hole of the shower arm.Then put the overhead shower on the shower arm.
PIPELINES CHEMATIC
UNIVERSAL NPT1/2″ CONNECTION
Documents / Resources
|
PYSVSSS NPYSVSSS 12 Inch Rain Mixer Shower System with Waterfall Tub
Spout
[pdf] Instruction Manual
NPYSVSSS 12 Inch Rain Mixer Shower System with Waterfall Tub Spout, NPYSVSSS,
12 Inch Rain Mixer Shower System with Waterfall Tub Spout, Mixer Shower System
with Waterfall Tub Spout, Waterfall Tub Spout, Tub Spout
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>