OPCOM O2 Garden Table Light User Guide
- June 5, 2024
- OPCOM
Table of Contents
OPCOM O2 Garden Table Light
OVERVIEW
Congratulation on your purchase for O2 Garden, you will enjoy this table garden with an easy setup, No dirty hands, No bugs clean water Automatically Hydroponics gardening design to offer you green environment and fresh air, and humidity balance.. O2 Garden is great design to grow many kinds of plants, Succulent, Microgreen, and Mini indoor plants is recommended. Start this wonderful experience now!!
What‘s included:
- 1 Main Device
- Inner Water Basin
- Cleaning Sponge
- AC Adapter
- Water Spray Bottle
- Manual Warranty Card
Open Box
-
Move up and 3 Rotary 180 degree
-
O2 Garden Provide a variety of planting methods
Application A
Place the purchased 3″~5″ pot directly at the bottom of the inner water basin and water it regularly
Application B
Place the medium flat on the bottom of the inner water basin, Moss ferns Plant on the medium and keep it moist -
Plug Adaptor turn on, start for Growth
-
Press the “Growth” button or rotary arm on top of planting will auto switch to Growth mode
Product environment description :
This product is designed with reference to the home environment, without
built-in temperature control, it is best to place this product in an indoor
environment where the average temperature is 25 degrees Celsius for planting
and growth (18~30 degrees Celsius range), or when the temperature exceeds, the
air circulation needs to be properly adjusted so that the plants can grow
smoothly.
(except for individual special high and low-temperature plants).
| Panel | Fuction | Status | Time(On/Off) | Fan | Remark |
|---|
Power
Reading
ON
Growth HI
LOW
OFF
|
Power
| |
Press for “Starting”
Press 1 Sec. for “Shutdown”
| | When Power ON : Push Power button Bi sound and until BiBi sound (About 5seconds) to reset timeline.
When Power OFF: Push Power button Bi sound and until BiBi sound (About 5seconds) to reset timeline.
Reading
| |
Press for “On” Press for “Off”
|
According to manual setting
| Press 1sec start to dimmer, every 0.5sec change 1step with “Bi” confirm
Reading/Growth mode: Rotation arm 45° switch to reading mode, turn back to original mode.
Growth
| | LED：24 Hrs/Daily LED：16 Hrs/Daily LED：9 Hrs/Daily LED：Off|
According to manual setting
|
When the LED is in the “ON” state, press and hold for 5 seconds.BiBi 2 sounds are set as the power-on time point for automatic wake-up.
When the LED is in the “OFF” state, press and hold for 5 seconds, and the BiBi 2 beeps are set as the time point for automatic shutdown.
(Brightness)
| | Adjust brightness with each press| According to manual setting| Brightness 100% 75% 50% 25% 0%
|
| Fan| | Press for “On” Press for “Off”|
Please visit OPCOM’s official website for more information and video www.opcomfarm.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>