BLUE AURA ps40 limited Hi-Fi Speaker User Guide
- June 3, 2024
- BLUE AURA
Table of Contents
Hi-Fi Speaker
ps40leman_v1
Please unpack the products carefully and take a moment to read the instructions.
At the end of the product’s useful life, please dispose of it at appropriate collection points provided in your country.
SPECIFICATIONS:
High Frequency Unit: Air Motion Transformer
Low Frequency Unit: Hemp impregnated cone
Frequency Range: 45 – 20000Hz
Crossover Frequency Max RMS Power: 4.7kHz 50 Watts per channel
Dimensions: H:253mm W:145mm D:205mm
Weight: 3.8Kg each
GENERAL INFORMATION ABOUT CONNECTING YOUR BLUE AURA LOUDSPEAKERS
Always use a good quality loudspeaker connection cable. We recommend cables with cross-sections of at least 2.5 mm² for lengths up to 3 m and at least 4 mm² for lengths above 3 m.
Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place the loudspeakers in their planned positions and cut the cables to the right length. The cables for both channels should always be exactly the same length. Strip 12 – 15 mm of insulation from the ends of the cables. Twist the ends – this is much better than tinning them with solder – insert them in the terminals and tighten the terminal screws firmly.
If loudspeaker cables are not connected correctly you may hear no sound, or if the polarities are reversed you will hear an unnatural loss of low frequencies.
Most loudspeaker connecting cables are clearly marked to identify the Positive and Negative wires.
Before turning on the system double-check all your connections and make sure that the terminal screws are tight and that there are no short circuits caused by stray braides of wire- this could cause damage to your amplifier.
LISTENING POSITION
In the ideal configuration the speakers and the listening position should form an equilateral triangle. When the left and right speakers are the same distance from the listening position their sound arrives at the same time, resulting in a harmonious, natural music reproduction. There should be a clear line of sight between the loudspeakers and the listening position. Any sound absorbing or reflecting obstacles in the path will distort the sound.
MAINTENANCE
The surface is best cleaned with a mild household cleaner. On no account use furniture polish or similar products.
Thank you for purchasing our product.
Please visit our website to get more information.
Documents / Resources
| BLUE
AURA ps40 limited Hi-Fi
Speaker
[pdf] User Guide
ps40 limited Hi-Fi Speaker, ps40 limited, Hi-Fi Speaker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>