BLUE AURA WS30i Loudspeaker System User Manual

WS30i

FEATURES:

– 2 X LINE IN + SUB OUT USB DC OUT/5V 250MA (WST ONLY) DC IN 17
– ACTIVE MONITOR SPEAKER
– POTENTIAL TO RECEIVE AUDIO SIGNAL WIRELESSLY
– MULTI-FUNCTION REMOTE CONTROL
– FAUX LEATHER COVERED
– BESPOKE DESK STANDS
– CAN BE CONNECTED TO ALL DEVICES WHICH HAVE LINE-OUTPUT, BOTH 3.5MM STEREO OR RCA
– FULLY SHIELDED – CAN BE PLACED NEXT TO TV

SPECIFICATIONS:

POWERED STEREO LOUD-SPEAKER SYSTEM
2 WAY BASS REFLEX CABINETS

AMPLIFIER
2X25W CLASS A/B

HIGH FREQUENCY UNIT
3/4″ SOFT DOME

LOW FREQUENCY UNIT
3.5″ PAPER CONE

FREQUENCY RANGE
55 – 20.000Hz

CROSSOVER FREQUENCY
12DB/OCTAVE @3.0KHz

DIMENSIONS
H X W X D
175 X 112 X 145MM
WEIGHT PER LOUDSPEAKER 1.5KG

WHAT’S IN THE BOX?

1 X PAIR LOUDSPEAKERS –    1 X REMOTE CONTROL
1 X ACTIVE 1 X PASSIVE

2 X POWER CORDS/POWER     1 X LINE OUT CABLE-
SUPPLIES                                      (RCA – MINI JACK)

1 X 1 .2M SPEAKER             1 X 3.5MM MINI JACK
CONNECTION                     CABLE (3.5MM MINI JACK
CABLE                                   – 3.5MM MINI JACK)

THE LOUDSPEAKERS ARE COVERED WITH A SOFT FAUX LEATHER MATERIAL.
PLEASE TAKE CARE WHEN UNPACKING THE SPEAKERS TO AVOID SCRATCHING OR INDENTING THE MATERIAL.
BEFORE INSTALLING THIS PRODUCT PLEASE READ ALL OF THE INSTRUCTIONS.
THE AMPLIFIER INSIDE THE LEFT LOUDSPEAKER HAS BUILT IN THERMAL AND SHORT CIRCUIT PROTECTION.
I F AN AMPLIFIER IS DRIVEN BEYOND ITS POWER OUTPUT CAPABILITIES IT WILL PRODUCE DISTORTED SOUND WHICH MAY DAMAGE YOUR LOUDSPEAKERS. MAKE SURE YOU DO NOT LEAVE YOUR LOUDSPEAKERS UNATTENDED WHEN PLAYING AND REDUCE THE VOLUME AT THE FIRST SIGN OF AUDIBLE DISTORTION.
WE RECOMMEND THAT YOU KEEP ALL PACKING UNTIL YOU ARE COMPLETELY SATISFIED WITH YOUR PURCHASE.
PLEASE REGISTER YOUR PRODUCT BY COMPLETING THE FORM AT THE BACK OF THIS MANUAL OR BY REGISTERING ON LINE AT WWW.BLUEAURA.CO.UK/REGISTER
I F YOUR PRODUCT WAS PURCHASED OUTSIDE THE UK PLEASE RETURN THIS CARD TO YOUR LOCAL DISTRIBUTOR.

GETTING STARTED

PLACE THE WS30 SPEAKERS IN YOUR PREFERRED POSITION – THE LEFT SPEAKER SHOULD BE WITHIN REACH OF A WALL SOCKET.
LEFT AND RIGHT SPEAKERS CAN BE IDENTIFIED BY LOOKING AT THE REAR OF THE CABINET. L LEFT & R RIGHT
WITH THE MAINS SOCKET IN THE OFF POSITION, CONNECT THE MAINS LEAD TO THE SPEAKER USING ONLY THE SUPPLIED MAINS LEAD AND POWER SUPPLY. TURN THE MAINS SOCKET ON

CONNECT THE LEFT AND RIGHT SPEAKERS TOGETHER USING THE SUP-PLIED SPEAKER CABLE ENSURING CORRECT POLARITY. THE SPEAKER CABLE HAS A RED STRIPE RUNNING ALONG THE LENGTH. CONNECT THE RED WIRE TO THE RED TERMINAL AND CLEAR WIRE TO THE BLACK TERMINAL.

ALWAYS REDUCE THE VOLUME ON THE REMOTE CONTROL BEFORE SWITCHING BETWEEN DEVICES.

CONNECT YOUR “DEVICE” USING THE APPROPRIATE SUPPLIED CABLE.

• 3.5MM HEADPHONE JACK CAN BE USED TO CONNECT DIRECTLY FROM A DEVICE WITH HEADPHONE SOCKET TO THE LINE IN SOCKET ON THE BACK OF THE WS30.
• 3.5MM HEADPHONE JACK TO AUX IN (RCA) CAN BE USED TO PROVIDE THE OPTION OF A SECOND SOURCE DEVICE. (BY USING THE REMOTE YOU CAN SWITCH BETWEEN DEVICES)

THE SAME LEAD (REVERSED) CAN BE USED TO CONNECT FROM A DEVICE WITH AUX OUT (E.G.TV) TO LINE IN ON THE BACK OF THE WS30.

USING THE REMOTE CONTROL PRESS THE STATION BUTTON TO SELECT YOUR DEVICE.
THE LEFT W530 SPEAKER IS EQUIPPED WITH AN LED TO INDICATE WHICH DEVICE IS SELECTED.
RED LED -LINE IN. BLUE LED – AUX IN.

…..MAKE YOUR WS30I SYSTEM WIRELESS!

(WSTXR REQUIRED – OPTIONAL EXTRA)

THE WS30 IS SUPPLIED WITH BUILT IN USB POWER SUPPLY AND USB SOCKET. THE WS30 CAN EASILY BE UPGRADED TO WORK WIRELESSLY WITH SOURCE DEVICES. (THE USB SOCKET IS FOR THE WIRELESS RECEIVER ONLY)

INSTRUCTIONS FOR USING THE WSTXR

THE TRANSMITTER IS USED TO SEND THE AUDIO SIGNAL FROM THE SOURCE DEVICE TO THE RECEIVER (PLUGGED INTO THE BACK OF THE LEFT WS30 LOUD-SPEAKER)
THE TRANSMITTER CAN BE IDENTIFIED BY THE SYMBOL AND THE RECEIVER CAN BE IDENTIFIED BY THE SYMBOL PRINTED NEXT TO THE LED ON EACH UNIT.
TO USE YOUR WS30 SPEAKERS WITH A PC OR MAC IN WIRELESS MODE –

MAC SET-UP

1. INSERT THE USB CONNECTOR FROM THE TRANSMITTER TO A FREE USB SOCKET ON YOUR MAC
2. GO TO SYSTEM PREFERENCES AND UNDER HARDWARE CHOOSE SOUND
3. CLICK OUTPUT IN MENU AND CHOOSE USB HEADSET.

PC SET-UP

1. INSERT THE USB CONNECTOR FROM THE TRANSMITTER TO A FREE USB SOCKET ON YOUR PC OR LAPTOP
2. WAIT UNTIL THE SOFTWARE HAS BEEN INSTALLED, USUALLY A CONFIRMATION BEEP OR MESSAGE WINDOW ALERT

IF THE ABOVE INSTRUCTIONS DO NOT WORK YOU MAY NEED TO DO THE FOLLOWING

CLICK START BUTTON ON PC, GO TO THE CONTROL PANEL, AND CHOOSE SOUND & SOUND DEVICES
UNDER PLAYBACK OF AUDIO; DEFAULT UNIT CHOOSE USB HEADSET.

IF YOU ARE STILL HAVING PROBLEMS PLEASE CONTACT SUPPORT@BLUEAURA.CO.UK

ALWAYS REDUCE THE VOLUME ON THE REMOTE CONTROL BEFORE SWITCHING BETWEEN DEVICES.

INSERT THE USB CONNECTOR FROM THE RECEIVER TO THE USB SOCKET ON THE BACK OF THE WS30 (LEFT SPEAKER). CONNECT ONE END OF THE 3.5MM MINI JACK TO THE RECEIVER AND THE OTHER END INTO THE LINE IN (3.5MM) SOCKET ON THE BACK OF THE WS30.
WITH THE WS30 POWERED ON, PRESS THE SOURCE BUTTON ON THE REMOTE CONTROL. THE LEFT WS30 SPEAKER IS EQUIPPED WITH AN LED TO INDICATE WHICH DEVICE IS SELECTED.WHEN USING LINE IN (3.5MM), THE LED ON THE FRONT OF THE WS30 SHOULD BE RED.
AUX IN CAN ALSO BE USED. CONNECT ONE END OF THE 3.5MM MINI JACK TO THE RECEIVER AND THE RCA (RED/WHITE) END INTO THE AUX IN SOCKETS ON THE BACK OF THE WS30. WHEN USING AUX IN, THE LED ON THE FRONT OF THE WS30 SHOULD BE BLUE. PRESS THE SOURCE BUTTON ON THE REMOTE CONTROL TO SWITCH BETWEEN DEVICES.

WIRELESS TRANSMITTER AND RECEIVER STATUS

WHEN THE TRANSMITTER IS CONNECTED TO A SOURCE DEVICE THE LED WILL INTERMITTENTLY FLASH
THERE ARE 3 ZONES AVAILABLE TO USE. RED, GREEN AND BLUE.
THE AIM IS TO GET THE SAME COLOUR ON THE TRANSMITTER AS THE RECEIVER.
THIS IS ACHIEVED BY PRESSING THE BUTTON IN THE CENTRE OF BOTH THE TRANSMITTER AND RECEIVER UNTIL THEY ARE THE SAME COLOUR. THE LED’S IN THE TRANSMITTER AND RECEIVER WILL INTERMITTENTLY FLASH UNTIL LOCKED ON.

1. PC/MAC
   TRANSMITTER 1
   BLUE

2. MP3 PLAYER
   TRANSMITTER 2
   GREEN

3. CD PLAYER/TV
   TRANSMITTER 3
   RED

4. Transmitter

5. Receiver

REMOTE CONTROL

(1) POWER ON/OFF
(2) MUTE
(3) STATION (SWITCH BETWEEN SOURCE)
(4) VOL+
(5) IPOD/IPHONE MENU
(6) VOL-
(7) CONFIRM
(8) ENTER
(9) CONFIRM
(10) BACK SKIP
(11) SKIP
(12) PLAYBACK/PAUSE
(13) ZONE A
(14) ZONE C
(15) ZONE B

ONLY WORKS WITH BLUE AURA WIRELESS SYSTEMS.

REAR PANEL

SPEAKER OUT TO RIGHT        RIGHT SPEAKER

(1) AUX IN
(2) SUB OUT
(3) TERMINAL
(4) LINE IN
(5) POWER
(6) ONLY FOR WSR WIRLESS RECEIVER

COMPLETE HOME WIRELESS NETWORK SET UP.

TAKE IT SERIOUSLY EASY.

WIRELESS LINK

Step 1 Transmitter

Step 2 Receiver

![BLUE AURA WS30i

• Wireless Link 6](https://manuals.plus/wp-content/uploads/2022/12/BLUE-AURA- WS30i-Wireless-Link-6.png)

  1. TV Line out cable- (RCA – mini jack)

  2. Computer USB

  3. Cd, MP3, Mobilephone…
     3.5mm Mini Jack cable

  4. Transmitter

  5. Select the LED colour

  6. WS30

  7. Subwoofer

  8. Amplifier

  9. Speaker

  10. WS80

  11. WSS1

  12. Receiver

  13. Select same colour

BLUE AURA WORLDWIDE GUARANTEE

THIS ENTITLES YOU TO HAVE THE UNIT REPAIRED FREE OF CHARGE, DURING THE FIRST TWO YEARS AFTER PURCHASE, AT ANY AUTHORISED BLUE AURA DISTRIBUTOR PROVIDED THAT IT WAS ORIGINALLY PURCHASED FROM AN AUTHORISED BLUE AURA DEALER OR DISTRIBUTOR. THE MANUFACTURER CAN TAKE NO RESPONSIBILITY FOR DEFECTS ARISING FROM ACCIDENT, MISUSE, ABUSE, WEAR AND TEAR, NEGLECT OR THROUGH UNAUTHORISED ADJUSTMENT AND/OR REPAIR, NEITHER CAN THEY ACCEPT RESPONSIBILITY FOR DAMAGE OR LOSS OCCURRING DURING TRANSIT TO OR FROM THE PERSON CLAIMING UNDER THE GUARANTEE.

THE WARRANTY COVERS:
PARTS AND LABOUR COSTS FOR TWO YEARS FROM THE PURCHASE DATE. AFTER TWO YEARS YOU MUST PAY FOR BOTH PARTS AND LABOUR COSTS, THE WARRANTY DOES NOT COVER TRANSPORTATION COSTS AT ANY TIME.

CLAIMS UNDER GUARANTEE:
THIS EQUIPMENT SHOULD BE PACKED IN THE ORIGINAL PACKING AND RETURNED TO THE DEALER FROM WHOM IT WAS PURCHASED, OR FAILING THIS, DIRECTLY TO THE BLUE AURA DISTRIBUTOR IN THE COUNTRY OF RESIDENCE.IT SHOULD BE SENT CARRIAGE PREPAID BY A REPUTABLE CARRIER. NO RESPONSIBILITY CAN BE ACCEPTED FOR THE UNIT WHILST IN TRANSIT TO THE DEALER OR DISTRIBUTOR AND CUSTOMERS ARE THEREFORE ADVISED TO INSURE THE UNIT AGAINST LOSS OR DAMAGE WHILST IN TRANSIT.

FOR FURTHER DETAILS CONTACT BLUE AURA AT:
BLUE AURA CUSTOMER SUPPORT,
01480 477738
OR EMAIL SUPPORT@BLUEAURA.CO.UK.

PROBLEMS?
IF YOUR BLUE AURA DEALER IS UNABLE TO ANSWER ANY QUERY REGARDING THIS OR ANY OTHER BLUE AURA PRODUCT PLEASE CONTACT BLUE AURA CUSTOMER SUPPORT AT THE ABOVE ADDRESS AND WE WILL DO OUR BEST TO HELP YOU.

OPTIONAL EXTRA’S

WSTXR
WIRELESS TRANSMITTER KIT WANT TO SEND THE AUDIO SIGNAL FROM YOUR DEVICE TO YOUR WS30 SPEAKERS WIRELESSLY?
THE WST KIT IS SUPPLIED WITH A TRANSMITTER, RECEIVER AND INSTRUCTIONS.

WALL BRACKETS
ELEGANT WALL BRACKETS CAN BE USED TO WALL MOUNT YOUR WS30 SPEAKERS, AVAILABLE IN BLACK OR WHITE.

WIRELESS DONGLE 

SOLO STANDS
COMPLIMENT YOUR WS30 LOUDSPEAKERS BY PLACING THEM ON SPECIFICALLY DESIGNED STANDS FOR OPTIMUM LISTENING POSITION. AVAILABLE IN BLACK OR WHITE AND INCORPORATING CABLE MANAGEMENT FEATURES.

FOR MORE INFORMATION PLEASE VISIT
WWW.BLUEAURA.CO.UK OR CONTACT
INFO@BLUEAURA.CO.UK

PRODUCT REGISTRATION

ALL BLUE AURA PRODUCTS UNDERGO EXHAUSTIVE TESTS AND INSPECTIONS BEFORE AND DURING MANUFACTURE TO ENSURE WE DELIVER PRODUCTS OF THE HIGHEST QUALITY. HOWEVER, FOR COMPLETE PIECE OF MIND PLEASE REGISTER YOUR PRODUCT WITHIN 30 DAYS TO TAKE ADVANTAGE OF OUR EXTENDED 12 MONTH GUARANTEE.

PLEASE RETURN THE COMPLETED REGISTRATION CARD TO BLUE AURA, PO BOX 293 ST NEOTS, CAMBRIDGESHIRE PE19 9EW

OR REGISTER YOUR PRODUCT AT WWW.BLUEAAURA.CO.UK/REGISTER

|

CAUTION

|
---|---|---

RISK OF ELECTRICAL SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF INSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

CLASS II PRODUCT
DOUBLE INSULATED OR CLASS 2 ELECTRICAL APPLIANCES ARE PRODUCTS THAT HAVE BEEN DESIGNED IN A WAY SO AS NOT TO REQUIRE A SAFETY CONNECTION TO ELECTRICAL EARTH (THESE PRODUCTS MUST NOT HAVE A SAFETY CONNECTION TO EARTH).

IMPORTANT SAFETY INSTRUCTIONS

1. READ THESE INSTRUCTIONS

2. KEEP THESE INSTRUCTIONS.

3. HEED ALL WARNINGS.

4. FOLLOW ALL INSTRUCTIONS.

5. DO NOT USE APPARATUS NEAR WATER.

6. CLEAN ONLY WITH A DRY CLOTH.

7. DO NOT BLOCK ANY VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS.

8. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT.

9. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

10. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.

11. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.

12. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANY WAY, SUCH AS POWER-SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN SPILLED OR OBJECTS HAVE FALLEN INTO THE APPARATUS, THE APPARATUS HAS BEEN EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY, HAS BEEN DROPPED.

13. DAMAGE REQUIRING SERVICE
    UNPLUG THE APPARATUS FROM THE WALL OUTLET AND REFER SERVICING TO QUALIFIED SERVICE PERSONNEL UNDER THE FOLLOWING CONDITIONS:
    A. WHEN THE POWER-SUPPLY CORD OR PLUG IS DAMAGED,
    B. IF LIQUID HAS BEEN SPILLED, OR OBJECTS HAVE FALLEN INTO THE APPARATUS,
    C. IF THE APPARATUS HAS SEEN EXPOSED TO RAIN OR WATER,
    D. IF THE APPARATUS DOES NOT OPERATE NORMALLY BY FOLLOWING THE OPERATING INSTRUCTIONS. ADJUST ONLY THOSE CONTROLS THAT ARE COVERED BY THE OPERATING INSTRUCTIONS AS AN IMPROPER ADJUSTMENT OF OTHER CONTROLS MAY RESULT IN DAMAGE AND WILL OFTEN REQUIRE EXTENSIVE WORK BY A QUALIFIED TECHNICIAN TO RESTORE THE APPARATUS TO ITS NORMAL OPERATION.
    E. IF THE APPARATUS HAS BEEN DROPPED OR DAMAGED IN ANY WAY, AND.
    F. WHEN THE APPARATUS EXHIBITS A DISTINCT CHANGE IN PERFORMANCE THIS INDICATES A NEED FOR SERVICE.

14. OBJECT AND LIQUID ENTRY.
    NEVER PUSH OBJECTS OF ANY KIND INTO THE APPARATUS THROUGH OPENINGS AS THEY MAY TOUCH DANGEROUS VOLTAGE POINTS OR SHORT-OUT PARTS THAT COULD RESULT IN A FIRE OR ELECTRIC SHOCK. THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. DON’T PUT CANDLES OR OTHER BURNING OBJECTS ON TOP OF THIS UNIT.
    ALWAYS CONSIDER THE ENVIRONMENTAL ISSUES AND FOLLOW LOCAL REGULATIONS WHEN DISPOSING Or BATTERIES.

15. ALWAYS CONSIDER THE ENVIRONMENTAL ISSUES AND FOLLOW LOCAL REGULATIONS WHEN DISPOSING OF BATTERIES.

16. IF YOU INSTALL THE APPARATUS IN A BUILT-IN INSTALLATION, SUCH AS A BOOKCASE OR RACK, ENSURE THAT THERE IS ADEQUATE VENTILATION. LEAVE 20 CM (8″) OF FREE SPACE AT THE TOP AND SIDES AND 10CM (4″) AT THE REAR. THE REAR EDGE OF THE SHELF OR BOARD ABOVE THE APPARATUS SHALL BE SET 10 CM (4″) AWAY FROM THE REAR PANEL OR WALL, CREATING A FLUE-LIKE GAP FOR WARM AIR TO ESCAPE.

17. THE POWER SUPPLY AND POWER CORD FOR THIS APPARATUS IS INTENDED FOR INDOOR USE ONLY.

18. ONLY USE THE ENCLOSED AC ADAPTOR.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE (E&OE)

DESIGNED, ENGINEERED AND SUPPORTED IN THE UK
WWW.BLUEAURA.CO.UK

BLUE AURA
PO Box 293
ST NEOTS
PE19 9EW

WS30IMANV.01

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>