AUDIBAX Roma 120 Go PA Systems User Manual

AUDIBAX Roma 120 Go PA Systems

Safety Instructions

Please read and keep all safety and use instructions. Important Safety Instructions Refer to the user manual for more information about your Detroit 1000X DSP.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produces heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way such as a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

• This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock.
• This symbol on the product means there are important operating and maintenance instructions in this guide.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3.
• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

System Setup Connections and Controls

1. LCD Display: Mode, fast forward, reverse, single cycle, pause/play/TWS *BT/TWS pair connecting: select BLUE in MODE on 2 speakers; Long press TWS button simultaneously to activate it on 2 speakers for pairing Short press TWS to disconnect pairing

2. USB: Insert the USB into the card slot to play the stored music.

3. SD: Put it in the SD card slot and play the stored music.

4. MP3 Control: Adjust the volume of MP3.

5. Line Output: Use a XLR cable to connect the line-level output to the Channel 1 or 2 input of a second Roma 120 Go to create a mono, two-loudspeaker setup.
   Note: Line Out is post mix.

6. Channel Input: Analog input for connecting microphone and instrument (XLR) cables.

7. MIC/Line Button: Press the button to select your uitar or instrument.

8. Volume Control: Adjust the volume of your microphone, instrument or audio source. Treble

9. Control: Adjust the high-frequency balance of your microphone or instrument.

10. Bass Control: Adjust the low-frequency balance of your microphone or instrument.

11. Master Control: Adjust the overall output level of the speaker system.

12. AC Input: 100-240V AC power input.

13. Power/Signal/Clip Indicator: Displays the input signal status in color.

    • Green: Power on
    • Yellow: Signal present
    • Red: Signal clipping
      Note: Reduce the corresponding volume control to prevent signal clipping.

14. Power: Press to switch power ON/OFF. Though the battery will always charge while the unit is connected to AC power, “Charge Only” enables you to charge your battery more quickly.

Specifications

• Type PA System All-in-One Battery Powered
• Transducer LF 1 * 6.5″ subwoofer, 1″ voice coil
• Transducer HF 0.8” dome tweeter
• Frequency Response (-6dB) 60 Hz – 18 kHz
• Max. SPL (1m, free space) 102 dB
• Impedance 4Ohms
• Amplification Class D with Mp3 Player
• Power Output (RMS) 60W
• Number of Mixer Channels 3
• Number of Mic Preamps 2
• EQ 2-Band Channel EQ
• Inputs 2 * XLR / USB input
• Output 1*XLR line out
• Bluetooth Yes, and support TWS function
• Enclosure Material Polypropylene Plastic
• Mounting Options 35mm pole mount, Tilt-back, Floor Monitor, Wall mount
• Power Supply 110~240V 50/60Hz
• Battery Rechargeable Lithium–ion battery 6pcs 1500mAh 18650

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>