SEADA SD-MV-0501 Multiviewer User Manual
- June 3, 2024
- SEADA
Table of Contents
SEADA SD-MV-0501 Multiviewer User Manual
Note
- Do not fix the device to any surface which is a heat source to avoid over heating
- Do not cover the surface or ventilation grills of the device to avoid over heating
1. Verify the package contents
Please verify the package contents against the List Below
- SD-MV-0501 Unit x1
- 24V/1A Power Adapter x1
- Quick Start Manual x1
- 3-pin Phoenix Connector X1
- Download Guide Card X1
- HDBaseT RX (only with Kit) X1
2. Set up the SD-MV-0501
I. Connect the power cable to the unit and power it up
II. Connect the outputs to the screens via HDMI cable or HDBaseT RX
III. Connect all the video sources to the inputs of the devices
3. Control SD-MV-0501 via Front Panel
4. Control SD-MV-0501 via Serial Port
9600 baud rate, 8 data bits, 1 stop bit, no parity. Please refer to SD-MV-0501 User Manual for command lines to control the unit.
This quick start manual provides basic instructions for setting up SEADA SD- MV-0501 seamless switcher with multiview. For additional information about how to use the unit, please refer to the SD-MV-0501 User Manual, which can be downloaded from the SEADA website (https://seada.co.uk/downloads).
SD-EN-031 V01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>