Saramonic Blink500 ProX TXQ Wireless Microphone System User Manual

Microphone
2.4GHz
Blink500 ProX RX
Blink500 ProX RXQ
Blink500 Pro 4RX
Blink500 ProX RXDi
Blink500 ProX RXUC
User Manual

General Introduction

The Saramonic Blink500 ProX is an incredibly lightweight, ultracompact, and easy-to-use wireless microphone system for up to 2 people. The microphone delivers exceptional, broadcast-quality sound to smartphones, tablets, computers, DSLRs, camcorders, recorders, and other audio/video recording devices. It features automatic pairing, low latency and up to 100 meters of operating range. Blink500 ProX is ideal for instrument recording, live streaming, vlogging, mobile journalism, and more.
The Blink500 ProX TX clip-on transmitter has a great-sounding built-in omnidirectional microphone and it is small and light enough to clip to shirts and clothing, or you can use it as a traditional belt pack transmitter with the included lavalier microphone. The Blink500 ProX RX also features a much- desired selectable Mono/ Stereo output
setting when using a second transmitter, giving you the ability to record each mic to separate channels of the camera’s and recorder’s stereo audio inputs.
The transmitter and receiver deliver a remarkable 10 hours of run time on a single charge. The supplied charging case allows you to charge the transmitter and receiver anywhere and can be recharged or powered via the USB-C DC 5V port.
No technical knowledge of audio is required to operate, with no complicated menus or settings. The Blink500 ProX system operates on the 2.4GHz spectrum and automatically hops to free channels to avoid static noise and audio dropouts.

Available Kits

1Blink500 ProX RX
1Blink500 ProX B1 BOX
BlinkS00 ProX B2| 1 xBlinkS00 ProX TX
1Blink500 ProX RX
1 xBlinkS00 ProX B2BOX

Statement
Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: [email protected]

1. 1. The disintegration of this device by non-professionals is strictly prohibited.

2. Please keep it away from heat sources such as heaters or ovens.
3. Do not remove the battery without professionals’ help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please pay attention to dust and moisture.
6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

Product Structure

Blink5OO ProX TX:
Body-Pack Transmitter with OLEO Display and Microphone

1. Power/Mute button
   Function| Operation
   ---|---
   Power ON/ OFF| Long press for 2 seconds
   Mute ON/ OFF| Short press

2. +/SET Button
   Function| Operation
   ---|---
   +| On the home screen, short press to increase mic gain.
   On the menu screen, short press to select different functions or values shown on the display.
   SET| On the home screen, long press to enter the menu screen.
   On the menu screen, long press to enter the displayed menu. Then, long press again to confirm your option.

3. -Button
   Function| Operation
   ---|---
   –| On the home screen, short press to decrease mic gain.
   On the menu screen, short press to select different functions or values shown on the display.
   BACK| On the menu screen, long press to return to the home screen.

4. USB-C Charging Port (DC SV)

5. OLED Display
   Display menus, please refer to “OLED Display Operation Guide” (-­ P9) for more details.

6. Charging Contacts

7. Belt Clip

8. Built-in Microphone

9. MIC/LINE IN Jack
   It can be connected to the 3.5mm lavalier microphones, and other 3.5mm microphones or line-in devices.

Blink5OO ProX RX:
Clip-On and Shoe-Mountable Receiver

1. Power/Mute button
   Function| Operation
   ---|---
   Power ON/ OFF| Long press for 2 seconds
   Mute ON/ OFF| Short press

2. +/SET Button
   Function| Operation
   ---|---
   +| On the home screen, short press to increase volume.
   On the menu screen, short press to select different functions or values shown on the display.
   SET| On the home screen, long press to enter the menu screen.
   On the menu screen, long press to enter the displayed menu. Then, long press again to confirm your option.

3. -Button
   Function| Operation
   ---|---
   –| On the home screen, short press to decrease volume.
   On the menu screen, short press to select different functions or values shown on the display
   BACK| On the menu screen, long press to return to the home screen.

4. USB-C Charging Port (DC 5V)

5. OLED Display
   Please refer to “OLED Display Operation Guide” (–P9) for more details.

6. Charging Contacts

7. Belt Clip

8. LINE OUT Jack
   Connect the BlinkS00 ProX RX to a DLSR camera, mixer, or amplifier with the supplied output cable.

9. 3.5mm Headphones Output
   Connect a headphone to monitor the audio output.

Blink500 ProX B1 BOX:

Blink500 ProX B2BOX:

1. TX & RX Charging Indicator
   Charging = Static red (TX’s/RX’s battery level indicator flashes in cycle.)
   Fully charged = Light off (TX’s/RX’s battery level indicator is static and full.)

2. Power Capacity Indicator
   Indicator| Status
   ---|---
   | Charging (Blinks blue light in cycle)
   Full charged
   Current battery level (75%)
   Low battery (25%)
   The battery runs out/ Case closed
   Charging TX/RX (Blinks blue light for 1 minute)

3. OPEN Button

4. Case Battery Detection Button
   Short press the button, then the power capacity indicator of the charging case lights up, showing the current remaining battery.
   Note: Short press the detection button as case closed, and its power capacity indicator will light on for 3 seconds then off.

5. USB-C Charging Port (DC 5V)
   Note:  The transmitter/receiver will automatically turn on after opening the charging case and turn off after being placed in the case for 5 seconds or closing the case for 1 minute.

OLED Display Operation Guide

OLED Display Introduction (Transmitter)

Home Screen
If no operation is performed within 20 seconds on menu screens, the display will automatically return to home screen.

1. Channel Group Icon
   A.B The channel A/B is disconnected.
   A.B The channel A/B is paired successfully.
   ? Channel is unknown. (usually occurs when the transmitter restores default settings)

2. RF Level Indicator
   Indicates the current signal level.
   The signal is strong (Paired successfully)
   The signal is weak (Paired successfully)
    No signal (Disconnected)

3. TX’s Battery Level Indicator
   Displays the TX battery level.
   Please recharge the device immediately when the blank indicator starts flashing.

4. Audio Input Level Meter
   Displays the audio input level.

5. Mute Indicator of Mic
    Mute ON   Mute OFF

6. Mic Gain
   On the home screen, press the +/- button to adjust the volume of the microphone.
   The setting is retained even after the power is turned off.

7. TX’s Input Mode
   Displays the what input mode of the TX transmitter is currently set to, either MIC IN or LINE IN.

Menus Introduction

Mic Gain:  Adjust the microphone’s input gain level from 0to6. Defa­ ult is “5 Input Mode The input mode can be selected to Mic In or Line l. When the input mode is Mic In mode_the transmitter can be connected to the included lavalier microphone or other microphones with a5mm output. When the input mode is Line in mode,the receiver can be connected to line-level output devices. The system’s default is “Mic In”. Set Mute Key:  Enable or Disable mute key button function Default is Enable” Set Backlight.  Set backlight to Always On or On fr 10, 30, or 60 seconds. Default is “On” Language Setting:  English(Chinese) are available Default is English Restore Default Setting
Yes: restores default settings
No: exits restore default settings Pair Setting:  Pait with the receiver For details of operation, please refer to “Operation Guide” (­ P13) Version of the Blink500 Prok TX’s firmware

OLED Display Introduction {Receiver)

Home Screen
If no operation is performed within 20 seconds on menu screens, the display will automatically return to the home screen.

1. RX’s Output Mode
    Mono   Stereo

2. Mute Indicator of Headphone /Output
    Mute OFF   Mute ON

3. RX’s Headphone/Output Volume
   On the home screen, press+/­ button to adjust the headphone/ output volume. The setting is retained even after the power is turned off.

4. RX’s Battery Level Indicator
   Displays the RX battery level.
   Please recharge the device immediately when the blank indicator starts flashing.

5. Audio Input Level Meter
   Displays the audio input level.

6. Channel Group Icon

7. RF Level Indicator
   Indicates the current signal level.
   The signal is strong (Paired successfully)
   The signal is weak (Paired successfully)
    No signal (Disconnected)

8. TX’s Battery Level Indicator
   Displays the TX battery level.
   Please recharge the device immediately when the blank indicator starts flashing.

Menus Introduction

Headphone Output Volume: The headphone monitoring volume can be set from Oto 6.
Default is “5”. Output Mode: The output mode can be set to either mono or stereo \/hen in mono mode, the audio from the transmitter or transmitters will be mixed to both the left and right sides.
When in stereo mode, the two transmitters’ audio output will be separated to the left and right sides. The system default is mono. Set Mute Key: Enable or Disable the mute key button function.
Default is Enable”. Set Backlight.  Set backlight to Always On or On fr 10, 30, or 60 seconds.
Default is “On”. Language Setting:  English (Chinese) are available.
The default is English. Restore Default Setting
Yes: restores default settings
No: exits restore default settings Pair Setting: Pait with the receiver For details of the operation, please refer to “Operation Guide”(­ P13) Version of the Blink500 ProX RX’s firmware

Operation Guide

1. Long press the power button for 2 seconds to turn on the transmitter and the receiver.

2. Pairing
   Before leaving the factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow the below steps:

3. Long press the SET button to enter the menu screen.

4. Use the + or button to display the Pair setting menu on both transmitter and receiver.

5. Long press the SET button to select the menu.

6. Select “Yes” and long press the SET button to confirm

7. The transmitter and receiver will be successfully paired within 10 seconds

8. Connect the receiver to the mic input of a camera, recorder or mixer with the supplied 3.5mm TRS cable; or connect it to a smartphone, tablet, or computer with the other adapter cables (sold separately).

9.  You are ready to record.

NOTE:

1. lf a certain transmitter of BlinkS00 ProX B2 failed to pair, please turn off the paired transmitter, and then re-pair the unpaired transmitter and receiver.
2. Due to the 2.4GHz wireless frequency, signal can be easily attenuated.
   Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.

Packing Contents

BlinkSOO ProX B1
1 × Blink500 ProX TX Transmitter
1 × Blink500 ProX RX Receiver
1 × Blink500 ProX B1 BOX Charging Case
1 × Omnidirectional Lava lier Microphone (with Foam Windscreen and Mic Clip)
1 × FurWindshield for Built-in Microphone
1 × Type-C Charging Cable
1 × 3.5mm TRS to 3.5mm TRS Output Cable for Cameras

BlinkSOO ProX B2
2 × Blink500 ProX TX Transmitter
1 × Blink500 ProX RX Receiver
1 × Blink500 ProX B2BOX Charging Case
2 × Omnidirectional Lavalier Microphone (with Foam Windscreen and Mic Clip)
2 × Fur Windshield for Built-in Microphone
1 × 3.5mm TRS to 3.5mm TRS Output Cable for Cameras

Other Adapter Cable (Sold Separately)

Specifications

Blink500 ProX TX/ Blink500 ProX RX

3.5mm TRS Output Jack
Battery Specifications| 3.7V/400mAh
Power Requirements| Built-in Li-ion Battery or Charging Contact or 0SB-C DC 5V
Built-in Battery Life| TX/RX: Approx. 10 hours
Weight| TX: Approx. 1.0402z(29.5g)
RX: Approx. 1.080z(30.5g)
Dimensions| TX/RX: 2.20×1.49×0.61″ (563815.5mm)
Operating Temperature| 0°C to 50°C
Storage Temperature| -10C to 50°C

Blink500 ProX B1 BOX/ Blink500 ProX B2BOX

B2BOX: 3000mAh
Box’s Charging Time| B1BOX: < 3 hours
B2BOX: < 3 hours
Charge Cycle Times for TX&RX| B1BOX: 3times
B2BOX: 2 times
Weight| B1 BOX: 6.98oz(198g)
B2BOX: 9.31 oz(264g)
Dimensions| B18OX: 4.84×3.911.51″ (123×99.5×38.5mm)
B2BOX: 6.49×3.91 x 1.51″ (165×99.5×38.5mm)
Operating Temperature| 0°Cto 50°C
Storage Temperature| -10C to 50°C

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

For a better recording experience, the application SmartRecorder is recommended.

http://www.jiayz.com/AppDownloadQR/SmartRecorderQRPhone.html

Scan the QR code and follow us!

http://weixin.qq.com/r/ikk1LQXEelgFrUFO9xyY

Shenzhen Jiayz Photo Industrial., Ltd
A 16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China
 400-613-1096
www.saramonic.com
[email protected]

Read more: https://manuals.plus/saramonic/blink500-prox-tx-2-4ghz-wireless- microphone-system-manual#ixzz7Z6FbFAn4

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>