Saramonic Blink 100 Ultracompact 2.4GHz Dual-Channel Wireless Microphone System User Manual
- June 5, 2024
- Saramonic
Table of Contents
Saramonic Blink 100 Ultracompact 2.4GHz Dual-Channel Wireless Microphone
System
Statement
Please read this manual carefully before using and strictly operate and store
it in accordance with the instructions. Please save the manual for your future
reference. If you need further assistance than the user manual, please consult
your retailer for help or email us: info@saramonic.com
Cautions
- The disintegration of this device by non-professionals is strictly prohibited.
- Please keep it away from heat sources such as heaters or ovens.
- Do not remove the battery without professionals’ help.
- Please clean the device with only a soft, dry cloth.
- When using and storing, please pay attention to dust and moisture.
- For the best pick-up pattern, do not hold your hand against the microphone capsule cover.
Available Kits
| Model | In the box |
|---|
Blink100 B1
| Blink100 TX×1 Blink100 RX×1
Blink100 B2
| Blink100 TX×2 Blink100 RX×1
General Introduction
Saramonic Blink100 is an ultracompact and portable 2.4GHz wireless microphone system, compatible with smartphones, tablets, DSLR cameras, and camcorders. It features automatic pairing and selectable noise cancellation, delivering broadcast-quality sound. Blink100 is ideal for live streaming, vlogging, mobile journalism and more.
Product Structure
Wireless Transmitter Blink100 TX
Status indicator
| Status | Indicator |
|---|---|
| Power ON/ Unpaired/ Pairing | Blinks blue quickly |
| Power OFF | Red light steady for 1s then off |
| Paired Successfully | Static blue light |
| Mute ON | Blinks red slowly (per second) |
| Mute OFF | Red light off |
| Noise Cancellation ON | Static green light |
| Noise Cancellation OFF | Green light off |
| Low Battery | Blinks red quickly |
| Charging | Static red light |
| Charging as Using | Static red & blue light |
| Fully Charged | Red light off |
Power/Mute button
| Function | Operation |
|---|---|
| Power ON/ OFF | Press and hold for 2s |
| Mute ON/ OFF | Short press |
+ -/NR button
- Press +/- button to adjust mic gain. (The setting is retained even after the power is turned off.)
- Press and hold or continuously press “+”/ “-” to adjust mic gain to maximum/ minimum, the indicator flashes blue twice (flashes green twice in noise cancellation mode).
- Press the NR button (press both “+” and “-” buttons at the same time) to turn on/off noise cancellation. (Default setting is off.)
Belt clip
Built-in microphone
USB-C charging port (DC 5V)
Use the supplied USB-C charging cable to charge the unit.
Wireless Receiver Blink100 RX
Status indicator
| Status | Indicator |
|---|---|
| Power ON/ Unpaired/ Pairing | Blinks blue quickly |
| Power OFF | Red light steady for 1s then off |
| Paired Successfully | Static blue light |
| Low Battery | Blinks red quickly |
| Charging | Static red light |
| Charging as Using | Static red & blue light |
| Fully Charged | Red light off |
Note: Please charge the receiver in time when in a low battery status, or it will auto shut off within 10 mins.
Power button
Press and hold the power button for 2s to turn it on/ off.
LINE OUT jack
Connect the Blink100 RX to a smartphone, tablet, camera, recorder or mixer
with the supplied output cables.
USB-C charging port (DC 5V)
Use the supplied USB-C charging cable to charge the unit.
Belt clip
How to use
For the Blink100 B1/B2 kit
- Press and hold the power button for 2 seconds to turn on the transmitter/receiver.
- The transmitter and receiver will be successfully paired within 10s.
- You are ready to record.
Note: Due to the 2.4GHz wireless frequency, a signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signals, such as high-power Wi-Fi antennas, radios, etc.
Specifications
| Transmission Type | 2.4GHz |
|---|---|
| Polar Pattern | Omnidirectional |
| Frequency Response | 20Hz-16kHz |
| SNR | 76dB |
| Sensitivity | -39±2dB |
| Transmission Range | 50m (without obstacles) |
| TX’s Battery Life | Approx. 10 hours |
| Battery Capacity | 90mAh |
| Charging Port | USB-C |
| Dimensions | TX/RX: 39×35×14mm |
Weight
| ****
TX/RX: 0.58oz (16.5g)
Packing list
Blink100 B1
- Blink100 TX Transmitter ×1
- Blink100 RX Receiver ×1
- 3.5mm TRS to TRS Output Cable for Cameras ×1
- 3.5mm TRS to TRRS Output Cable for Smartphones ×1
- USB-C Charging Cable ×2
- Fur Windshield ×1
Blink100 B2
- Blink100 TX Transmitter ×2
- Blink100 RX Receiver ×1
- 3.5mm TRS to TRS Output Cable for Cameras ×1
- 3.5mm TRS to TRRS Output Cable for Smartphones ×1
- USB-C Charging Cable ×3
- Fur Windshield ×2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>