Saramonic BlinkMe 2.4GHz Wireless Smart Microphone with Touchscreen User Manual

2.4GHz Wireless Smart Microphone
with Touchscreen
BlinkMe
User Manual
1F0300400448

Statement

Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future reference.
If you need further assistance than the user manual, please consult your retailer for help or email us: info@saramonic.com

• Non-professional teardown is strictly prohibited.
• Please keep it away from heat sources such as heaters or ovens.
• Do not remove the battery without professionals’ help.
• Please clean the device with only a soft, dry cloth.
• When using and storing, please keep away from the dust and moisture.

General Introduction

The Saramonic BlinkMe, a professional dual channel wireless microphone system with touchscreen, which can be used with different magnetic accessories. This ultra-portable and incredibly lightweight mic system boasts universal compatibility with tablets, laptops, cameras, recorders, mixers, and other audio/ video recording devices. Ideal for content creators, filmmakers, journalists, vloggers, live streaming, and so much more.

• Quick and easy to operate the intuitive touchscreen
• Separate OS without having to rely on any application
• Smart onboard recording capability
• Also available in 48kHz HD audio when noise reduction enabled
• The receiver can charge the transmitter(s)
• Customize the wallpaper for the transmitter through the Saramonic App
• A magnetic system with several accessories
• Flexibly attach or remove the transmitter to or from clothes

Overview

Transmitter

① Microphone Capsule
② Touchscreen
③  Power Button
• Press and hold for 3 seconds power on or off.
• Press twice to lock or unlock the screen.
④ LED Indicator
Indicates the status of the transmitter when its screen is turned off.

⑤ NR Button
• Press to enable or disable noise reduction.
• Press twice to enable or disable onboard recording.
• Press and hold for 1.5 seconds to mute or unmute the microphone.
⑥ Contacts
⑦ Magnet

Receiver

① LED Indicator
Indicates the status of the receiver when its screen is turned off.

② Magnet
③ Power Button
• Press and hold for 3 seconds power on or off.
• Press twice to lock or unlock the screen.
④ Contacts
⑤ +/- Button
Press to turn up or turn down the output gain level of the receiver in 3dB increments from -12dB to +12dB.
⑥ Touchscreen
⑦ USB-C Port
Used for charging the receiver and transferring data.
⑧ 3.5mm Monitor Port
Connect your headphone to monitor the audio output.
⑨ 3.5mm Auto-Sensing Output (TRS/TRRS)
For analog audio output to a camera, smartphone or mixer, etc.

Touchscreen Operations

Transmitter

• From the Home screen, press the power button to turn the screen on or off.
• To return to the Home page from any other pages, press the power button once.
• Press the power button twice to lock or unlock the screen and return to the Home page.

| Indicates the screen is locked or unlocked.
It is recommended that you can lock your screen to avoid accidental taps during a recording. By default, the device returns to the Home screen automatically when the screen is locked.
---|---
| Indicates the current wireless signal strength between transmitter 1 and the receiver. A gray icon indicates a failed connection.
| Indicates the battery level of the transmitter.
| Indicates the noise reduction is enabled.
| Indicates the audio input level.
Reduce the transmitter gain accordingly when the volume bar turns red.
| Indicates the microphone is muted.
| Indicates the onboard recording is enabled.
| Indicates the input gain of the transmitter.
| Indicates the left or right sound channel.
| Indicates Stereo, Mono or Safety Channel mode.

From the Home screen, swipe up from the bottom of the screen to access device settings.
Swipe up or down to select Onboard Recording, Noise Reduction, TX Gain, Brightness, Display and Settings. From device settings, tap to return to the previous screen.

|  REC Protection| When the function is activated, the onboard recording can only be disabled by operating the screen instead of pressing the button.
---|---|---
Auto Recording| When the function is activated, the onboard recording will be enabled automatically as soon as the transmitter is switched on.
Bit Depth| Tap to set bit depth to 16bit or 24bit.
| Original sound| Default to original sound. Select original sound or HD noise reduction on demand.
HD noise reduction
| | Drag the Gain control slider to adjust the input gain level of the transmitter in 1dB increment from -12dB to +12dB. Note that the transmitter gain will affect the volume of the recorded audio.
| | Drag the Brightness slider to adjust the screen brightness.

| Power saving| By default, when enabled, this will turn screen brightness to 50% and turn the screen off after 10 seconds of inactivity.
Always on| When enabled, the screen will always stay on.
Auto screen off| Scroll up or down to set the time when the screen is turned off automatically.
| Pairing| Tap to access the page where you can pair the transmitter with the receiver.
Language| Tap to choose a language.
Date & Time| Tap to set the date and time for the recording files.
Reset| Tap to restore the transmitter to its factory default settings, which resets everything except the onboard recording files and current pairing status.
Version| Tap to view the firmware version and serial number of the transmitter.
Cert info| Tap to view certification information.

From the Home screen, swipe down from the top of the screen to display Quick settings.

Power saving
Always on
Auto screen off| Tap to switch.
---|---
Microphone muted
Microphone unmuted| Tap to switch.
Onboard recording enabled
Onboard recording disabled| Tap to switch.
Settings| Tap to quickly access.

Themes
Choose a theme you want to be applied to your Home screen.

1. From the Home screen, touch and hold the screen.
2. Swipe up or down to view nine types of default themes.
3. Tap the screen to apply the selected theme.

https://app.release.jiayz.com/appdata/toDownloadSA

If you want, you also can customize the wallpaper for your Home screen on the Saramonic app. To download the app, scan the QR code on the screen.

Receiver

• To return to the Home page from any other pages, press the power button once.
• Press the power button twice to lock or unlock the screen and return to the Home page.

| Indicates the screen of the receiver is locked or unlocked.
 It is recommended that you can lock your screen to avoid accidental taps during a recording. By default, the device returns to the Home screen automatically when the screen is locked.
---|---
| Left and right sides: The transmitter’s battery level. Middle of the screen: The receiver’s battery level.
| Indicates that the receiver is charging.
| Indicates that the transmitter is being charged by the receiver.
| Indicates that the receiver is in Mono, Stereo, or Safety Channel mode.
| Left and right sides: The transmitter’s input gain. Middle of the screen: The receiver’s output gain.
| Indicates the wireless signal strength between transmitter 1 and the receiver.
| Indicates the wireless signal strength between transmitter 2 and the receiver. If there’s no second transmitter connected, this icon will not be displayed.
| Indicates the audio input level.
Reduce the transmitter gain accordingly when the volume bar turns red.
| Indicates the left or right sound channel.
Under Stereo mode, transmitter TX1 matches the left channel, transmitter TX2 matches the right channel.
| Indicates the onboard recording is enabled.
| Indicates the microphone is muted.

From the Home screen, swipe down from the top of the screen to access device settings. Swipe left or right to select Recording Mode, RX Gain, TX Gain, Display and Settings. From device settings, swipe up from the bottom of the screen to return to the previous screen.

| Mono| Signal from the transmitter or both transmitters can be mixed together and recorded identically to left and right channels.
---|---|---
Stereo| Signals from each transmitter can be recorded to a separate channel.
Safety Channel| Similar to Mono mode, the audio of the right channel will be recorded in -6dB in case distortion in your recordings.
| | Drag the Gain control slider to adjust the output gain level of the receiver in 1dB increment from -12dB to +12dB. The receiver gain can be reduced if the sound is distorted.
| | In the paired state, tap left or right to set TX1 or TX2. Drag the Gain control slider to adjust the input gain level of the transmitter(s) in 1dB increment from -12dB to +12dB. Note that the transmitter gain will affect the volume of the recorded audio.
| Power Power saving saving| By default, when enabled, this will turn screen brightness to 50% and turn the screen off after 10 seconds of inactivity.
Always Always on on| When enabled, the screen will always stay on.
| Pairing| Tap to pair the receiver with the transmitter(s).
Brightness| Tap it, then drag the Brightness slider to adjust the screen brightness.
 Language| Tap it, then swipe left or right to choose a language.
 Reset| Tap to restore the receiver to its factory default settings, which resets everything except the current pairing status.
 Version| Tap to view the firmware version and serial number of the receiver.
 Cert info| Tap to view certification information.

To access transmitter TX1 or TX2 settings from the Home screen, swipe up on the left or right side of the screen.

Onboard recording enabled
Onboard recording disabled| Tap to switch.
---|---
Microphone muted
Microphone unmuted| Tap to switch.
 Memory| Indicates the remaining available time for recording. Tap to access a submenu.
 Format| Tap to erase the onboard recording files of the transmitter.

Using BlinkMe

Transmitter

Use the magnetic clip to attach the transmitter to clothes.

Use the magnets to attach the transmitter to clothes.

Receiver

1. Connect a camera, a smartphone or a laptop to the 3.5mm auto-sensing audio output of the receiver with an adapter cable.
2. Plug your headphones for audio monitoring as your need.

How to Pair
The transmitter and receiver are paired by default. If they are disconnected, please tap the screens of the transmitter and receiver to enter Settings, and then tap “Pair” to reconnect.

1. When both TX1 and TX2 need to be paired with RX, operate the transmitter first, and then operate the receiver.
2. If the screen of a device is failed to operate, press and hold the power button for 18 seconds to force the shutdown of the device, and then press and hold the power button for 3 seconds to turn the device on.
3. Due to the 2.4GHz wireless frequency is widely used, the signal may be easily attenuated or interfered. Please try to avoid obstacles while using, such as walls and buildings. And keep away from the devices with 2.4GHz frequency, such as high-power Wi-Fi antennas, radios, etc.

How to Charge

1. To charge the transmitter(s), please place it(them) on the receiver.
   If the receiver reaches its safe battery level, it will stop charging the transmitter(s).

2. Use the included USB-A to USB-C cable to charge the receiver when the battery is low.

Audio Output for Dual Devices

To output audio simultaneously, connect the receiver to two devices via the 3.5mm auto-sensing output or USB-C output using a correct cable.

Onboard Recording

• The memory can store up to 22 hours of recording at the 48kHz/16bit sampling rate.
  The memory can store up to 15 hours of recording at the 48kHz/24bit sampling rate.

• The file will be automatically split after 30 minutes of recording, making it easy to quickly find your desired recording segment.

• By default, the recording files are named in the format “DATE-TIME.WAV”. Up to 999 recording files can be created.

• If the memory is full, the original file will be automatically overwritten with the latest file from the beginning.

Note that in this mode, the “mute” function will not affect the onboard recording.

Loading Files

Place the transmitters on the receiver, and then connect a laptop to the receiver’s USB-C port to read the recording files of TX1 and TX2.(You can rename the device in the Saramonic app.)

Specifications

hours (onboard recording disabled)
RX: Approx. 24 hours (One TX fully charged)
Memory| TX: 8GB
**** Weight| TX: 1.06oz (30g) RX: 2.47oz (70g)
Dimensions| TX: ø1.85×0.49” (ø47×12.5mm) RX: 2.23×2.23×0.99” (56.6×56.6×25.2mm)
Operating Temperature| 0°C to +50°C
Storage Temperature| -10°C to +50°C

Troubleshooting

If you encounter problems when using the unit, please refer to the following checklist before contacting technical support. If the problem cannot be solved, please contact the dealer’s after-sales service department.

• If there is no sound from the unit or no sound when connected to an external device
  ① Make sure that the connecting cable between the product and the device is not loose.
  ② Make sure the gain and volume are not turned to minimum.
  ③ Make sure the transmitter is not muted.

• If sound of the unit is too low or too loud or even distorted
  Adjust mic gain and volume to the suitable level for recording in the current environment to improve the recording effect.

• Current noise or other abnormal noise appears during monitoring
  ① Replace the connecting cable.
  ② Make sure there is no interference near the unit. If the noise still exists after changing the unit’s position, please contact our customer service.

• Failed to communicate with the other party when using applications such as live stream, conference, or communication (the other party’s voice cannot be heard via the 3.5mm monitor port)
  Make sure to connect your device to the receiver’s USB-C port. The receiver’s 3.5mm output port can only output audio but cannot communicate with the other party.

• The operating range of the unit is limited and the sound is intermittent frequently
  Make sure there is no interference between the transmitter and receiver. If the intermittent sound still occurs frequently, please contact our customer service.

• If the transmitter or receiver suddenly freezes up
  Press and hold the power button of the transmitter or receiver for 18 seconds to force the shutdown.

Other Accessories

Screen Protector for Transmitter

Screen Protector for Receiver
① Remove it
② Clear the dust on the screen
③ Stick on the screen protector

3.5mm TRS Male to Lightning Audio Cable (SR-C2000) (sold separately)

3.5mm TRS Male to USB-C Audio Cable (SR-C2001) (sold separately)

Contents of BlinkMe B2

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
ISEDC Warning
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

https://app.release.jiayz.com/appdata/toDownloadSA

For better recording experience, the application Saramonic is recommended.

http://weixin.qq.com/r/ikk1LQXEelgFrUFO9xyY

Scan the QR code and follow us！
Shenzhen Jiayz Photo Industrial., Ltd
A16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China

400-613-1096
www.saramonic.com
info@saramonic.com

References

• Saramonic-Premium Microphones, Headphones and other Pro Audio Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>