EMTEK Key in Lever/ Knob Dummy Installation Guide
- June 3, 2024
- Emtek
Table of Contents
EMTEK Key in Lever/ Knob Dummy
Installation Guide
Preparation
-
STEP 1
Remove inside lever or knob by loosening set screw w/hex wrench (provided). -
STEP 2
Unthread rosette counterclockwise to remove from housing before installing on door.
Install Chassis
Install inner housing onto surface of door, orienting the notch on the housing to the bottom. The two wood screws should be located at the top and bottom.
Thread Rosette into housing
Secure Rosette with locking ring
Install lever or knob into housing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>