EMTEK F13 UL Listed Mortise Lock Installation Guide
- June 3, 2024
- Emtek
Table of Contents
EMTEK F13 UL Listed Mortise Lock
Installation Guide
- Install Cylinder Plug
Install cylinder plug by threading it clockwise onto lock body
Note: Notch on cylinder plug must be in the 9 o’ clock position when fully screwed onto lock body.
- Install Mortise Lock
See template
for door prep specifications
- Install Key Cylinder
Install key ¾ of the way into the key cylinder and thread it clock-wise onto trim plate.
Plates and grip vary depending on style.
-
Tighten Key Cylinder
After key cylinder is installed, secure cylinder by tightening screw -
Mount Inside Trim to Door
-
**Install Trim Plate
**
- Tighten Inside Lever or Knob
Tighten Lever with 3/32 Hex wrench (provided).
- Install Door Jamb
See template for door jamb prep specifications
Instructions to reverse swing
- Remove dowel screw. (Replace after reversing swing)
- Pull out and rotate latch bolt to reverse its direction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>