EMTEK Pocket Door Mortise Lock Installation Guide

Installation Guide for Pocket Door Mortise Lock
Privacy Function

Pocket Door Mortise Lock

1. Thread Drive Bar Cylinder
   Use Cylinder Key to thread Drive Bar Cylinder clockwise on interior side of door.
   Note: Drive Bar Socket must be in the 12 o’ clock position as shown.
   Note: Notches on cylinder must be parallel with the horizontal plane when fully screwed into lock body.

2. Install Lock Body See template for door prep specification
   

3. Install Inside and Outside Plates
   Align Passage/Privacy button with Thumb-turn spindle and secure trim pates to door.

4. Tighten Key Cylinder
   Tighten locking screw to engage notches on cylinder

5. Install Trim Plate
   Door Jamb Prep.
   See template for door jamb prep specification

IN4-PCKMRLKINS-PRIV REV-1

Documents / Resources

| EMTEK Pocket Door Mortise Lock [pdf] Installation Guide
Pocket Door Mortise Lock, Door Mortise Lock, Mortise Lock, Lock
---|---
| EMTEK Pocket Door Mortise Lock [pdf] Installation Guide
Pocket Door Mortise Lock, Pocket Door Lock, Door Lock, Mortise Lock, Pocket Lock, Lock

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>