INNOCN 13K1F 13.3 Inch OLED Portable Monitor User Guide

13K1F
Portable Monitor
Quick Start Guide

13K1F 13.3 Inch OLED Portable Monitor

Thank you for choosing Innocn®!
We hope the Innocn® product you purchased will serve you well. To ensure safety and trouble-free operation of your device, please read the user guide carefully and keep it for future needs.
Please email us for customer service & technical support at [email protected].
We recommend you go online to our homepage for the most up-to-date guidance for your product.registering Innocn membership; refering to warranty information.
http://www.innocn.com

https://www.innocn.com/

Safety Precautions

1. Read all warnings and follow all instructions. Keep this user guide for later reference.
2. Do not use this device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.
3. Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury ormalfunction.
4. Avoid exposing the device to direct sunlight or other sources of sustained heat.
5. Always use genuine INNOCN components to ensure safety and product performance.
6. To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the display.
7. Disconnect the power plug from the AC outlet if the device will not be used for a long period of time.
8. When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.
9. Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.
10. The power adaptor must be replaced when using different voltage from that specified in the User Guide. For more information, please contact us.
11. Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
12. Do not apply pressure to the screen. Excessive pressure may cause permanent damage to the display.
13. Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation.
14. Do not attempt to repair the product by yourself. Opening the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact us anytime. ([email protected])
15. If there are visual smoke or sparks, unplug the power cord and contact us ([email protected]). Do not try to repair the product yourself.
16. To avoid risk of electric shock, do not touch the power plug and ports with wet hands.

Packaging List

Product Instruction

Key Instruction

1| Power Button:
Long press (3s) the button  to turn the monitor on / off.
Short press the button to open the OSD menu / enter sub-menus.
Long press (1s) the button to return to previous menu.
---|---
2| LED Indicator:
Blue: Working
Orange: Standby mode (no signal detected)
Dark: Power off
3| Up key:
In the OSD menu: press the up-key to move left in the menu / turn up the progress bar.
Without OSD menu: press the up-key to pop up the volume shortcut, then press to increase volume.
4| Down key:
In the OSD menu: press the down-key to move right in the menu / turn down the progress bar.
Without OSD menu: press the down-key to pop up the volume shortcut, then press to decrease volume.

Input Connector

Notes:

1. Since most of device can light up the monitor directly with Type-C cable connected, the power adapter is not included. If you need an power adapter, please use 5V/2.5A, 5V/3A, 5V/4.5A or above power consumption.
2. If a faulty or damaged cable is delivered with the machine, please be sure to replace it with the original cable from the dealer or manufacturer.

OSD(On-Screen Display) Menu
Press the menu key in the power-on state. The main menu (OSD) is displayed.

protection icon turns blue. Select the eye protection level.
TYPE-C| | When selected, signal source is Type-C
HDMI| | When selected, signal source is HDMI
Reset| | When selected, restore factory settings
EXIT| | When clicked, OSD menu disappears

Home

Press the up and down keys to adjust brightness, contrast ratio, and sound

Profiles

Press the up and down keys to select modes: Standard, Text, Movie, Game, Adobe RGB、sRGB

Color temperature

Select the USER mode to adjust RGB value.

Color

Press the up and down keys to adjust chroma, saturation, sharpness.

Eye protection level

Other icons

Troubleshooting

The following table contains general information about common monitor problems you might encounter and the possible solutions.

No display after turning monitor ON (screen is black but power supply lights is ON)| • Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
• Make sure if the operating system had entered hibernation, sleep or power- save mode. Press any key (Enter key / Power key) or move the mouse to wake it up.
• Check for bent or broken pins in the video cable connector.
• Ensure that the correct input source is selected in the Input Source menu.
• Replace other identical signal cable (HDMI / Type-C) to take cross-test.
Attention: Not every computer/phone ‘s USB Type-C port will support video out signals. Please check your cable and your computer/phone to make sure those will support a video signal.
No display after turning monitor ON (not boot, black screen & no power lights)| • Verify that the power outlet is functioning properly using any other electrical equipment. If your device has battery, make sure it’s not out of battery.
• Make sure the power button is pressed fully and hold for 5s.
Missing Pixels. OLED screen has spots| • Cycle power On-Off.
• Pixel that is permanently Off is a natural defect that can occur in OLED technology.
• For more information on Innocn Monitor Quality and Pixel Policy, see Innocn warranty information at: http://www.innocn.com.
Safety Related Issues (Visible signs of smoke or sparks)| • Do not perform any troubleshooting steps.
• Contact Innocn immediately.
Image does not fill entire viewing area.| • Check the resolution setting in your PC.
The screen appears yellow| • Make sure the device was not set to “Eyes Care mode”
• Check here: OSD→
Control panel keys do not work| • Press only one key at a time.
• Make sure to have a valid video signal going through the monitor before you can turn on the OSD.
I cannot adjust the brightness/ contrast ratio/ color saturation through OSD| • Make sure the device was set to “custom mode”
• Check here: OSD→

Product Specification

Warranty Information

1. What is covered in your warranty?
   Item| Warranty term
   ---|---
   Monitor| 3 Years
   Panel| 1 Years
   Battery| 1 Years
2. Contact us
   Service Email| [email protected]
   ---|---
   Service Website| http://www.innocn.com
3. Members only
   Signing up to become our members, to exchange new one without repair in one year.Register website| https://www.innocn.com/user/register
   ---|---
   QR code|
4. This Warranty is not applicable:
   1.The product is not purchased from an Authorized Innocn dealer.
   2.The product is not used according to instructions given in the instruction manual.
   3.Defects caused by improper use as determined by company personnel.
   4.Modification or alteration of any nature is made in the electrical circuitry / or physical
   construction of the set.
   5.Installation / repair work is carried out by persons / agency other than authorized by the company.
   6.The original serial number is removed, obliterated or altered from the machine or cabinet.
   7.Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage fluctuations or any cause beyond the control of Innocn.

[email protected]

References

• INNOCN | Portable Monitors & Desktop Monitors, 4K Monitors, Ultrawide
• afterservice.vip

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>