innocn 40C1R Art Monitor User Manual

innocn 40C1R Art Monitor

Precautions
Before using this product, please read this User Manual carefully and keep it well

• Keep the monitor away from water sources or damp places, such as bathrooms, kitchens,basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
• Store and use the monitor in a cool, dry and well-ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed,Sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing.
• If it is impossible to determine the supply votage, please consult the distributor or local power company.
• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. If faults occur please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Package Content

Packing list

• Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.
• The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
• Cables supplied may vary with purchased products. Figures in this User Manual are for reference only.

Installation

nstallation of base

1. Open the carton package, take out the upper and lower foam covers and put them flat on the table top.
2. Remove the upper foam cover and put it aside, take the monitor out from the ilm bag and put it in the chamber of the lower foam cover.
3. Take out the stand and the base and lock them with a 1 M6 thumb screw (see the figure below).
4. As shown in the figure below, put the base component assembled in Step 3 into the slot of the rear casing, slightly press the stand to clip the rotary shaft component into position, and hold the middle of the stand with hand to lightly lift the monitor twice to ensure that the monitor cannot loosen and the clip can lock the base component firmly; during disassembly, perform these steps reversely.
5. Simply hold the stand with hand to stand the monitor upright.
   Note: During standing of the monitor, do not take out the monitor from foams, and do not pinch the liquid crystal screen with hand to avoid damage to the screen.

Installation of mount

1. Open the package to take out foams wholly and put them on a flat tabletop.
2. Remove the upper foam cover and put it aside, take the monitor out from the film bag and put it in the chamber of the lower foam cover.
3. Remove the upper foam cover, take out the bag of the monitor and put the monitor back in the lower foam cover.
4. During padlocking of the monitor, do not pinch the screen with the hands to avoid damaging the screen. Install the mount to the mount stud by referring to the user manual of the mount (purchased separately).Tips: The mounting hole distance of the mount for the product is100x100mm.

Notes: To prevent the monitor on the mount from failing, please install it firmly and protect it fully.
Do not place or hang any object on the mount, and the using height of the mount should be less than 2 meters.

Adjustment of monitor

Instructions for use

Description of buttons

signals of the port
5| Power button: Press to turn on/off the monitor

Explanation of indicator light

Indicator light: Steady blue light indicates the power iS on and the monitor runs normally. Flashing red light indicates no video signal detected or low voltage. Please make sure that your computer is turned on and all video cables are fully plugged in and/or connected.

Cable connection

• The bottom interface configuration at the back of the monitor varies with products.
• Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

HDMI interface

Use the HDMI cable to connect the HDMI IN port of the product to the HDMI OUT port of a PC.

Use the HDM-DVI cable (not included) to connect the HDMI IN port of the product to the DVI OUT port ofa PC. (In general, PCs do not transfer video signals to the monitor through the DVI OUT interface, and it is necessary to connect a loudspeaker box additionally to play sounds of PCs.)

DP interface
Use the DP cable to connect the DP IN port of the product to the DP OUT port of a PC.

AUDIO OUT
Connect audio outputting devices such as earphones to the AUDIO OUT port.

Type-C interface
A Type-C line can be used to connect to data ports of machines and external terminals.

AC IN interface
Please connect the power cable plug to the corresponding port of the monitor, and connect the other end to a properly grounded power outlet.

OSD menu

When booting for the first time, you need to set the default language of the monitor menu.
Press buttons ( )to select the language to be set, and press the OK button(M) to confirm.

Please select the default language

English

Menu description

The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
Specifications of the OSD menu may change with improvements of functions without prior notice.
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.

1. Press one of the buttons ( ) to activate the browser screen.
   | Enter the main menu
   ---|---
   2| Adjust the brightness
   3| Adjust the volume
   4| Switch port input signal
   5| Power ON/ OFF
2. Press to enter the OSD screen.
3. Press or to scroll through the functions.
   • Select the desired function, and press to enter the sub-menu.
   • Press or to scroll through sub-menus, and press key to select and confirm the desired function.
   • Press or to select one option, and press O to confirm settings and exit from the current menu.
4. Press to exit from the menu screen

Functions of the monitor vary with models, and the functions in this manual are for reference only

Functions of the monitor vary with models, and the functions in this manual are for reference only.

Specification

Power Input

| 100-240V~ 50/60Hz,3.0A

The standard voltage and power supply may vary with countries, please refer to the label at the back of the product .

Product Dimentions| Without base| 944.1×418.Sx56.8mm approx. 8.78kg
With base| 944.1×572.2×253.6mm approx. 12.65kg
Tilting angle| Forward tilting-5°± 2.0°; Backward tilting+15°± 2.0°
Height range| 120±Smm
Rotation angle| -30°±2.0°/+30°±2.0°
Vertical angle| N/A

Environmental conditions

|

Action

| Temperature: O” C~ 40°C (32°F ~ 104°F) Humidity : 10%~90% RH (non- condensing)
Storage| Temperature: -20″~ 60° (-4″F ~ 140″F) Humidity: 5%~95% RH (non- condensing)

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, (2)This device must accept any interference received,including interference that may cause undesired operation.

Common troubleshooting

The following table contains general information about common monitor problems you might encounter and the possible solutions.

Supported Resolution and Refresh Rate

Warranty Information

1. What is covered in your warranty?

2. Contact us

3. Members only
   Signing up to become our members, to exchange new one without repair in one year.

4. This Warranty is not applicable:

5. The product is not purchased from an Authorized Innocn dealer.

6. The product is not used according to instructions given in the instruction manual.

7. Defects caused by improper use as determined by company personnel.

8. Modification or alteration of any nature is made in the electrical circuitry/ or physical construction of the set.

9. Installation/repair work is carried out by persons/agency other than authorized by the company.

10. The original serial number is removed, obliterated or altered from the machine or cabinet.

11. Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage fluctuations or any cause beyond the control of Innocn.

Blue light may cause eye fatigue and discomfort. Joint Innovation now offers the screen that passes German Rhine TUV Low Blue Light certification to ensure the comfort and health of users’ eyes.
Please follow the instructions below operate the screen to reduce symptoms caused by prolonged exposure to blue light on the Screen.

1. Place the screen 20-28 inches (50-70 cm) away from the eyes, with the center of the screen slightly below the line of sight.
2. When you need to use the screen for a long time, blinking consciously from time to time will help reduce eye fatigue.
3. Take a 20-minute break every 2 hours.
4. Take your eyes away from the screen when you rest and stare at distant objects for at least 20 seconds.
5. Stretch moderately during rest to relieve physical fatigue or pain.
6. After the factory setting, when the Low Blue Light function is set to 50, 75, 100, it conforms to TUV Rheinland’s low blue light certification

Contact us
Thank you for choosing lnnocn’!
We hope the Innocn’ product you purchased will serve you well. To ensure safety and trouble-free operation of your device, please read the user guide carefully and keep it for future needs.

Please email us for customer service & technical support at service@innocn.com.
We recommend you go online to our homepage for the most up-to-date guidance for your product. registering Innocn membership; refering to warranty information.
http://www.innocn.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>