INNOCN 29C1F-D 29 Inch Ultrawide Screen Art Monitor User Manual

INNOCN 29C1F-D 29 Inch Ultrawide Screen Art Monitor

Precautions

• Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
• Store and use the monitor in a cool, dry and well-ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing.
• If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Package Content

Packing list

• Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.
• The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
• Cables supplied may vary with purchased products. Figures in this User Manual are for reference only

1. Display screen
2. Stand
3. Base
4. Type-C cable
5. Power cable
6. HDMI Cable
7. User Manual
8. Color calibration report

Installation

Installation of base

1. Open the carton package, take out the upper and lower foam covers and put them flat on the table top.
2. Take off the top cover of Polylong, take out the body bag and put the body back into the original bottom cover of Baolong.
3. Take out the bracket and base, and tighten the manual screws on the base after assembly.
4. Insert the hook at the front end of the shaft of the lifting bracket into the bayonet of the rear shell obliquely, and gently press the tail end perpendicular to the surface of the rear shell, so that the lock of the lifting bracket can be buckled on the quick release button of the rear shell, and the quick release button has a return. The snap action indicates that the tail end has also been snapped into place.
5. Simply hold the stand with hand to stand the monitor upright.

Note: During standing of the monitor, do not take out the monitor from foams, and do not pinch the liquid crystal screen with hand to avoid damage to the screen.

Adjustment of monitor

Instructions for use

Cable connection：

The bottom interface configuration at the back of the monitor varies with products.
* Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

Description of buttons

Function

1. Menu button: Press to enter sub-menus/ quickly enter the main menu
2. Down button: Press to move down in the menu/quickly adjust the brightness
3. Up button: Press to move up in the menu/quickly adjust the volume
4. Exit/hot key: Press to return to the previous menu/quickly switch input signals of the port
5. Power button: Press to turn on/off the monitor
6. Indicator light: If the white light is normally on, it is indicated that the device is powered on, and that the monitor is running normally. red light indicates no video signal detected or low voltage. Please make sure that your computer is turned on and all video cables are fully plugged in and/or connected.
   Explanation of indicator light

OSD menu

When booting for the first time, you need to set the default language of the monitor menu.
Press buttons ( ) to select the language to be set, and press the OK button( ) to confirm.

Menu description

• The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice.

The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.

1. Press one of the buttons ( ) to activate the browser screen.

2. Enter the main menu

3. Adjust the brightness

4. Adjust the volume

5. Switch port input signal

6. Power ON/OFF

7. Press to enter the OSD screen.
   

8. Press to scroll through the functions.

   • Select the desired function, and press to enter the sub-menu.
   • Press to scroll through sub-menus, and press key to select and confirm the desired function.
   • Press to select one option, and press to confirm settings and exit from the current menu.

9. Press to exit from the menu screen

Functions of the monitor vary with models, and the functions in this manual are for reference only

Professional

| Standard Mode| N/A
---|---|---
sRGB Mode| N/A
Adobe Mode| N/A
Uniformity Mode| N/A
Gamma| 1.6/1.8/2.0/2.2/2.4/2.6/2.8/S.curve
C.T settings| Natural/Design/Warm/Cool/User C.T1/User C.T2/User C.T3
Sharpness| 0-5
Shadow Balance| 0-100
Low blue light| 0-100
Hue| R/G/B/C/M/Y
Saturation| R/G/B/C/M/Y
Dynamic Brightness| Off/Standard/Expert/Elaboration

Functions of the monitor vary with models, and the functions in this manual are for reference only.

Picture Sttings

| Brightness| 0-100
---|---|---
Contrast| 0-100
DCR| Off/On
Contextual model| Off/Movie mode/Reading mode/Night mode/Care eyes mode
Aspect ratio| Wide Screen/4:3/1:1/Auto

Game Settings

| RTS/RPG Mode| Off/On
FPS Arena Mode| Off/On
MOBA Arena Mode| Off/On
Adaptive-Sync| Off/On
Response Time| Off/Normal/Fast/Ultrafast
Refresh Rate| Off/On/Position
Game Crosshair| Off/Crosshair 1/Crosshair 2/Crosshair3/Crosshair 4/Crosshair 5/Crosshair6

PIP/PBP

| PIP/PBP Mode| Off/PIP Mode/PBP 2win 1:1/PBP( Phone1)/PBP( Phone2)
Sub-Singal Source| DP/HDMI/Type-C
Audio source| Auto/DP/HDMI/Type-C
PIP Position| Top Right/Top Left/Bottom Right/Bottom Left
PIP Size| Small/Medium/Large
Window Swap|

OSD

Settings

| Language| English/简体中文/한국어/ /Portugues do Brasilazil/ Deutsch/Nederland/ Suomi/ Français/Ελληνικά/Indonesia/Italiano/日本語/Malaysia/Polskie/Português/Pусский/ Español/ไทย/Українська/Tiếng Việt/繁體中文/Türkçe
OSD Time Out| 5-100
OSD H-Position| 0-100
OSD V-Position| 0-100
OSD transparency| 0-5
Hotkey1 Setting|

Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/Refresh Rate/Contextual model/ PIP/PBP Mode/Input Signal/Dynamic Brightness

Hotkey2 Setting
Hotkey3 Setting

Other Settings

| Input Sinal| Auto/DP/HDMI/Type-C
Volume| 0-100
Mute| Off/On
Auto Power| Off/On
Eyeshield Remind| Off/On
Reset| No/Yes
Information| Input Source: HDMI/ Resolution: 2560×1080@60Hz/Mode: Standard Mode/ SN:0000000000000

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B)/NMB-3(B)

Specification

The standard voltage and power supply may vary with countries, please refer to the label at the back of the product.

Product Dimentions

（with

Height range）

| Without base| 688.6×314.1×49.8 mm approx. 4.3 kg
With base| 688.6×554.1×218.9 mm approx. 6.5 kg
Tilting angle| Forward tilting5°±2°/Backward tilting20°±2°
Height range| 120±5mm
Rotation angle| -45°/+45°
Vertical angle| -90°/+90°

Environmental conditions

| Action| Temperature: 0°C~ 40°C（32°F ~ 104°F） Humidity: 10%~90% RH (non- condensing)
Storage| Temperature: -20°C~ 60°C（-4°F ~ 140°F） Humidity: 10%~90% RH (non- condensing)

German Rhine TÜV Low Blue Light Certification

The light the screen radiates contains a blue component, which may lead to fatigue and discomfort in the eye. The “low blue light” function tunes down the radiation of blue lights from the screen and thus reduces eye fatigue arising from the intensive use of the screen.

Blue light may cause eye fatigue and discomfort. Joint Innovation now offers a screen that passes German Rhine TÜV Low Blue Light certification to ensure the comfort and health of users’ eyes. Please follow the instructions below to operate the screen to reduce symptoms caused by prolonged exposure to blue light on the screen.

1. Place the screen 20-28 inches (50-70 cm) away from the eyes, with the center of the screen slightly below the line of sight.
2. When you need to use the screen for a long time, blinking consciously from time to time will help reduce eye fatigue.
3. Take a 20-minute break every 2 hours.
4. Take your eyes away from the screen when you rest and stare at distant objects for at least 20 seconds.
5. Stretch moderately during rest to relieve physical fatigue or pain.
6. After factory setting, when the low blue light function is set to 50,70,100, it conforms to TUV Rheinland’s low blue light certification.

Common troubleshooting

The following table contains general information about common monitor problems you might encounter and the possible solutions.

Warranty Information

1. What is covered in your warranty?
   Item| Warranty term
   ---|---
   Monitor| 1 Year
2. Contact us
   Service Email| service@innocn.com
   ---|---
   Service Website| http://www.innocn.com
3. This Warranty is not applicable:
4. The product is not purchased from an Authorized Innocn dealer.
5. The product is not used according to instructions given in the instruction manual.
6. Defects caused by improper use as determined by company personnel.
7. Modification or alteration of any nature is made in the electrical circuitry / or physical construction of the set.
8. Installation / repair work is carried out by persons / agency other than authorized by the company.
9. The original serial number is removed, obliterated or altered from the machine or cabinet.
10. Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage fluctuations or any cause beyond the control of Innocn.

Contact us

Thank you for choosing Innocn®!
We hope the Innocn® product you purchased will serve you well. To ensure safety and trouble-free operation of your device, please read the user guide carefully and keep it for future needs.
Please email us for customer service & technical support at service@innocn.com.
We recommend you go online to our homepage for the most up-to-date guidance for your product.

registering Innocn membership; refering to warranty information.
http://www.innocn.com

service@innocn.com

References

• INNOCN | Portable Monitors & Desktop Monitors, 4K Monitors, Ultrawide
• TÜV Rheinland - Home | US | TÜV Rheinland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>