innocn 29C1F 29 Inches Ultrawide Monitor User Guide

innocn 29C1F 29 Inches Ultrawide Monitor

Precautions

Before using this product, please read this User Manual carefully and keep it well

• Keep the monitor away from water sources or damp places, such as bathrooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
• Store and use the monitor in a cool, dry and well-ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing.
• If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Package Content

Packing list

• Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.
• The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
• Cables supplied may vary with purchased products. Figures in this User Manual are for reference only

installation

installation of base

1. Open the carton package, take out the upper and lower foam covers and put them flat on the table top.

2. Take off the top cover of Polylong, take out the body bag and put the body back into the original bottom cover of Baolong.

3. Take out the bracket and base, and tighten the manual screws on the base after assembly

4. Insert the hook at the front end of the shaft of the lifting bracket into the bayonet of the rear shell obliquely, and gently press the tail end perpendicular to the surface of the rear shell, so that the lock of the lifting bracket can be buckled on the quick release button of the rear shell, and the quick release button has a return. The snap action indicates that the tail end has also been snapped into place

5. Simply hold the stand with hand to stand the monitor upright

Note: During standing of the monitor, do not take out the monitor from foams, and do not pinch the liquid crystal screen with hand to avoid damage to the screen

Adjustment of monitor

Instruction for use

Description of button

signals of the port
5| Power button: Press to turn on/off the monitor

Explanation of indicator light

Indicator light: Steady blue light indicates the power is on and the monitor runs normally. red light indicates no video signal detected or low voltage. Please make sure that your computer is turned on and all video cables are fully plugged in and/or connected.

Cable connection

• HDMI interface
• DP interface
• AUDIO OUT
• USB A interface
• USB B interface
• Type-C interface
• AC IN interface

OSD menu

When booting for the first time, you need to set the default language of the monitor menu. Press buttons( ) to select the language to be set, and press the OK button( ) to confirm.

Menu description

• The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice. The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.

1. Press one of the buttons () to activate the browser screen.

2. Press to enter the 05D screen.

3. Press to scroll through the functions.
   • Select the desired function, and press to enter the sub-menu.
   • Press Tor to scroll through sub-menus, and press key to select and confirm the desired function.
   • Press Tor to select one option, and press Oto confirm settings and exit from the current menu.
4. Press to exit from the menu screen

Functions of the monitor vary with models, and the functions in this manual are for reference only

Professional

| Standard Mode| N/A
---|---|---
sRGB Mode| N/A
Adobe Mode| N/A
Uniformity Mode| N /A
Gamma| 1.6/l .8/2.0/2.2/2.4/2.6/2.8/5.curve
CT settings| Natural/Design/Warm/Cool/User C.T1/User C.T2/User C.T3
Sharpness| 0-5
Shadow Balance| 0-100
Low blue light| 0-100
Hue| R/G/B/C/M/Y
Saturation| R/G/B/C/M/Y
Dynamic Brightness| Off/Standard/Expert/Elaboration

Picture Sttings

| Brightness| 0-100
Contrast| 0-100
OCR| Off/On
Contextual model| Off/Movie mode/Reading mode/Night mode/Care eyes mode
HOR| Off/HORStandard/HOR Movie/HOR Design
Aspect ratio| Wide Screen/4:3/1:1/Auto

PIP/PBP

| PIP/PBPMode| Off/PIPMode/PBP 2win 1:1/PBP( Phonel)/PBP( Phone2)
Sub-Singal Source| DP/HDMl1/HDMl2/Type-C
Audio source| Auto/DP/HDMl1/HDMl2/Type-C
PIP Position| Top Right/Top Left/Bottom Right/Bottom left
PIP Size| Small/Medium/Large
Window Swap|

05D Settings

| Language| tj:l::SZ:/English/’El- Oi/<.r.Y:-/Portugues do Brasilazil/ Deutsch/Nederland/ Suomi/ Fram;:ais/EAAl”]v1K6/lndonesia/ltaliano/E3 ffi/Malaysia/Polskie/Portugues/PyccK M Espal1ol/1l’ltJ/YKpa·1HcbKa/Til!ng Vit;=lt/ c:p::sz:/Ti.irki;e
OSDTimeOut| 5-100
OSD H-Position| 0-100
05D V-Position| 0-100
OSD transparency| 0-5
Hotkeyl Setting|

Brightness/ContrastNolume/Mute/Shadow Balance/Game Crosshair/Refresh Rate/Contextual model/ PIP/PBP Mode/Input Signal/Dynamic Brightness/HOR/Gravity Sensor/USS Switch

Hotkey2 Setting
Hotkey3 Setting

Other Settings

| Input Sinai| Auto/DP/HDMl1/HDMl2/Type-C
Volume| 0-100
Mute| Off/On
Auto Power| Off/On
Eyeshield Remind| Off/On
Gravity Sensor| Off/On
USB Switch| Type-B/Type-C
U5B POWER(5LEEP)| Off/On
U5B Upgrade| No/Yes
Reset| No/Yes
Information| Input Source: HDMI2/ Resolution: 2560xl 080@60Hz/Mode: Standard Mode/ HDRVer:SDR/ SN:0000000000000

Specification

The standard voltage and power supply may vary with countries, please refer to the label at the back of the product.

Product  I

Dimentions

| Without base| 688.6×315.4×50.3 mm approx. 4.6kg
With base| 688.6×534.3×218.9 mm approx. 6.45kg
Tilting angle| Forward tilting-5°(±2.0°)/Backward tilting+20°(±2.0°)
Height range| 120±5mm
Rotation angle| -45°(±2.0°)/+45°(±2.Q°)
Vertical angle| -90.0°(±2.0°)/+90°(±2.0°)

Environmental conditions

| Action| Temperature: 0°C- 40°C (32°F – 104°F) Humidity: 10%-90% RH (non- condensing)
Storage| Temperature: -20°~ 60° (-4°F- 140°F) Humidity: 5%~95% RH (non- condensing)

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3(8)

Common troubleshooting

The following table contains general information about common monitor problems you might encounter and the possible solutions.

Supported Resolution and Refresh Rate

Type-C

Detailed Timing
2560×1080@60Hz
2560×1080@75Hz
1280×1080@60Hz(PBP 1:1)
Entablished Timing

720×400@70Hz-lBM .VGA
640×[email protected]
640×[email protected]
640×480@72Hz-VESA
640×480@75Hz-VESA
800×600@56Hz-VESA
800×600@60Hz-VESA
800x600pat75Hz-VESA
832×[email protected]
1024×768@60Hz-VESA
1024×768@75Hz-VESA
1280×1024@75Hz-VESA
1152×[email protected]
Standard Timing

1920×1080@60Hz-VESASTD
1680×1050@60Hz-VESASTD
1280×1024@60Hz-VESASTD
1152×864@75Hz-VESASTD
1280×720@60Hz-VESASTD
1280×960@60Hz-VESASTD
1600×900@60Hz-VESASTD
Video Timing

[1][email protected]@4:3@1:1
[2][email protected]/60Hz@4:3@8:9
[3][email protected]/60Hz@16:9@32:27
[4][email protected]/60Hz@16:9@1:1
[5][email protected]/60Hz@16:9@1 :1
[16][email protected]/60Hz@16:9@1 : 1 [Native code is defined and Native=1]
[17]720x576p@50Hz@4:3@16:15
[18]720x576p@50Hz@16:9@64:45
[19]1280x720p@50Hz@16:9@1:1
[20]1920x1080i@50Hz@16:9@1:1
[31]1920x1080p@50Hz@16:9@1:1
DP[1.2]

Detailed Timing
2560×1080@60Hz
2560×1080@75Hz
1280×1080@60Hz(PBP 1:1)
1960×1080@60Hz(PBP(Phone1))
Entablished Timing

720×[email protected]
640×480@60Hz-lBM .VGA
640×[email protected]
640×480@72Hz-VESA
640×480@75Hz-VESA
800×600@56Hz-VESA
800×600@60Hz-VESA
800×600@75Hz-VESA
832×[email protected]
1024×768@60Hz-VESA
1024×768@75Hz-VESA
1280×1024@75Hz-VESA
1152×[email protected]
Standard Timing

1920×1080@60Hz-VESASTD
1680×1050@60Hz-VESASTD
1280×1024@60Hz-VESASTD
1152×864@75Hz-VESASTD
1280×720@60Hz-VESASTD
1280×960@60Hz-VESASTD
1600×900@60Hz-VESASTD
Video Timing

[1][email protected]@4:3@1:1
[2][email protected]/60Hz@4:3@8:9
[3][email protected]/60Hz@16:9@32:27
[4][email protected]/60Hz@16:9@1:1
[5][email protected]/60Hz@16:9@1:1
[16][email protected]/60Hz@16:9@1:1 [Native code is defined and Native=1]
[17]720x576p@50Hz@4:3@16:15
[18]720x576p@50Hz@16:9@64:45
[19]1280x720p@50Hz@16:9@1:1
[20]1920x1080i@50Hz@16:9@1:1
[31]1920x1080p@50Hz@16:9@1:1
HDMl[2.0]

Detailed Timing
2560×1080@60Hz
2560×1080@75Hz
1280×1080@60Hz(PBP 1:1)
1960×1080@60Hz(PBP(Phone1))
Entablished Timing

720×[email protected]
640×[email protected]
640×[email protected]
640×480@72Hz-VESA
640×480@75Hz-VESA
800×600@56Hz-VESA
800×600@60Hz-VESA
800×600@75Hz-VESA
832×[email protected]
1024×768@60Hz-VESA
1024×768@75Hz-VESA
1280×1024@75Hz-VESA
1152×[email protected]
Standard Timing

1920×1080@60Hz-VESASTD
1680×1050@60Hz-VESASTD
1440×900@60Hz-VESASTD
1280×1024@60Hz-VESASTD
1152×864@75Hz-VESASTD
1280×720@60Hz-VESASTD
1280×960@60Hz-VESASTD
Video Timing

[1][email protected]@4:3@1:1
[2][email protected]/60Hz@4:3@8:9
[3][email protected]@16:9@32:27
[4][email protected]@16:9@1:1
[5][email protected]@16:9@1:1
[16][email protected]@16:9@1:1 [Native code is defined and Native=1]
[17]720x576p@50Hz@4:3@16:15
[18]720x576p@50Hz@16:9@64:45
[19]1280x720p@50Hz@16:9@1:1
[20]1920x1080i@50Hz@16:9@1:1
[31]1920x1080p@50Hz@16:9@1:1
HDMl[1.4]

Detailed Timing
2560×1080@60Hz
2560×1080@75Hz
1280×1080@60Hz(PBP 1:1)
1960×1080@60Hz(PBP(Phone1))
Entablished Timing

720×[email protected]
640×[email protected]
640×[email protected]
640×480@72Hz-VESA
640×480@75Hz-VESA
800×600@56Hz-VESA
800×600@60Hz-VESA
800×600@75Hz-VESA
832×[email protected]
1024×768@60Hz-VESA
1024×768@75Hz-VESA
1280×1024@75Hz-VESA
1152×[email protected]
Standard Timing

1920×1080@60Hz-VESASTD
1680×1050@60Hz-VESASTD
1440×900@60Hz-VESASTD
1280×1024@60Hz-VESASTD
1152×864@75Hz-VESASTD
1280×720@60Hz-VESASTD
1280×960@60Hz-VESASTD
Video Timing

[1][email protected]@4:3@1:1
[2][email protected]@4:3@8:9
[3][email protected]@16:9@32:27
[4][email protected]@16:9@1:1
[5][email protected]/60Hz@16:9@1:1
[16][email protected]/60Hz@16:9@1:1 [Native code is defined and Native=1]
[17]720x576p@50Hz@4:3@16:15
[18]720x576p@50Hz@16:9@64:45
[19]1280x720p@50Hz@16:9@1:1
[20]1920x1080i@50Hz@16:9@1:1
[31]1920x1080p@50Hz@16:9@1:1

Warranty Information

What is covered in your warranty?

• item
  Warranty term

• monitor
  1 Years

Contact us

• Service Email: [email protected] 

• Service Website: http://www.innocn.com

• Members only
  Signing up to become our members, to exchange new one without repair in one year.

• Register website: https://www.innocn.com/user/register

• **QR code

**

This Warranty is not applicable:

1. The product is not purchased from an Authorized lnnocn dealer.
2. The product is not used according to instructions given in the instruction manual.
3. Defects caused by improper use as determined by company personnel.
4. Modification or alteration of any nature is made in the electrical circuitry / or physical construction of the set.
5. S.lnstallation / repair work is carried out by persons / agency other than authorized by the company.
6. The original serial number is removed, obliterated or altered from the machine or cabinet.
7. Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage fluctuations or any cause beyond the control of lnnocn.

German Rhine TOV Low Blue Light Certification

Blue light may cause eye fatigue and discomfort. Joint Innovation now offers the screen that passes German Rhine TOV Low Blue Light certification to ensure the comfort and health of users’ eyes. Please follow the instructions below operate the screen to reduce symptoms caused by prolonged exposure to blue light on the screen.

www.tuv.com
ID 0217008683

1. Place the screen 20-28 inches (50-70 cm) away from the eyes, with the center of the screen slightly below the line of sight.
2. When you need to use the screen for a long time, blinking consciously from time to time will help reduce eye fatigue.
3. Take a 20-minute break every 2 hours.
4. Take your eyes away from the screen when you rest and stare at distant objects for at least 20 seconds.
5. Stretch moderately during rest to relieve physical fatigue or pain.
6. Turning on Low Blue Light after factory setting is in line with TUV Rhein land’s low blue light certification.

Contact us

Thank you for choosing lnnocn· !
We hope the lnnocn· product you purchased will serve you well. To ensure safety and trouble-free operation of your device, please read the user guide carefully and keep it for future needs.
Please email us for customer service & technical support at [email protected].
We recommend you go on line to our homepage for the most up-to-date guidance for your product. registering lnnocn membership; refering to warranty information.
http://www.innocn.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>