EMTEK Square and Round Pocket Mortise Lock Installation Guide
- June 3, 2024
- Emtek
Table of Contents
EMTEK Square and Round Pocket Mortise Lock
Installation Guide
- Square and Round Pocket Mortise Lock – Privacy
Thread Drive Bar Cylinder
- Use Cylinder Key to thread Drive Bar Cylinder clockwise on interior side of door.
Note: Drive Bar Socket must be in the 12 o’ clock position as shown.
Note: Notches on cylinder must be parallel with the horizontal plane when fully screwed into lock body.
Install Lock Body
- See template for door prep specification
Install Inside and Outside Plates
Tighten Key Cylinder
- Tighten locking screw to engage notches on cylinder
Install Trim Plate
Door Jamb Prep.
- See template for door jamb prep specification.
- IN4-SQRDPCKTMRTPRIV-INS REV. 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>