EMTEK 2704 Toilet Paper Holder with Spring Rod Installation Guide

EMTEK 2704 Toilet Paper Holder with Spring Rod

Installation Guide

1. Mark the center of the mounting plates
   Make two marks on wall to locate the center of the mounting plates. Center-to- center spacing for mounting plates is 6 inches.

2. Mark hole locations
   Using the mounting plate, mark three hole locations per mounting plate.

3. Install screw anchors
   Use a screwdriver to install six screw anchors into the wall (3 per plate)

4. Install Mounting Plate
   Install mounting plates on top of the Screw Anchors. Secure using screws provided.

5. Install trim plate and post
   Slip trim plate and post over mounting plate stud. Tighten set screw at the base of post with Allen Wrench provided.

6. Install trim plate and post cont.
   Repeat step 5 for the other trim plate and post.

7. Install Paper Holder Spring Rod

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>