Laird 1575 MHz GPS Asset Tracking Internal Antenna Instructions
- June 3, 2024
- Laird
Table of Contents
Laird 1575 MHz GPS Asset Tracking Internal Antenna Instructions
COMPACT ANTENNA IS IDEAL FOR COVERT INSTALLATIONS
The Internal GPS antenna enables direction and location information in a compact housing. The antenna measures only 63.5 x 63.5 x 13 mm, allowing covert installation into vehicle interiors. It performs well with or without a ground plane.
Laird Technologies is a leading supplier of mobile antenna solutions for automotive, asset tracking and consumer electronics industries. Products include cellular antennas (AMPS, GSM/DCS/PCS, UMTS), GPS antennas, entertainment antennas (AM/FM, DAB, DVB-T, Satellite radio, TV), mobile communication antennas (Bluetooth, DSRC, RKE, TPMS, WiFi), satellite communication antennas and battery packs.
Leveraging our experience in M2M wireless modules, Laird Technologies also designs smart antennas integrating functionalities such as cellular, WiFi and Bluetooth® modems, GPS receivers and vehicle networking. All of these capabilities can be further integrated into M2M Devices, that add control electronics and firmware to provide the latest evolution in telematics systems.
FEATURES
- High gain antenna for excellent satellite reception
- Compact, ideally suited for stealth applications
- Built-in ground plane to increase mounting flexibility
- Can be combined with Cellular Blade antenna (part # 637109)
BENEFITS
- Low total-cost implementation
- Easy installation
- Easy concealment
- Small package size
- Meets enhanced environmental specifications
- Ground plane independent
APPLICATIONS
- General automotive aftermarket
- Fleet logistics, tracking, and diagnostics
- Theft protection
- Vehicle and asset recovery
- Navigation systems
- Infotainment systems
- On-board computing
Specifications
ANTENNA SPECIFICATION
- Frequency Range: 1574.42 -1576.42 MHz
- Peak Gain: 4.5 dBic @ Boresight
- Polarization: RHCP
- Impedance: 50 Ω
- Output VSRW (Min. Performance): ≤ 2:1
LNA SPECIFICATION
- Gain (Max): 28 dB
- Noise Figure: ≤ 1.5 dB
- Supply Voltage: 3.3 ± 0.3 V
- Current: 12 mA
- Input P1dB: ≥ -27 dBm
- Output VSWR: ≤ 2:1
MECHANICAL SPECIFICATION
- Dimension: 63.5 x 63.5 x 13 mm
- Radome Material: Cycoloy
- Connector: SMA
- Cable Length: 4000 mm
- Cable Type: RG-174
- Mounting Method: Hook and Loop, Adhesive
ENVIRONMENTAL SPECIFICATION
- Operating Temperature: -40°C to +85°C
- Humidity Operation: 95% RH at 65°C
- Ingress Protection: IP-50
- Drop Test / Shock: 50 g shocks 10×3 axis / 1 meter drop 6 axis
- Vibration: 10-1000 Hz vibration 1 hour 3 axis
ORDERING INFORMATION
- Part Number: 637108
- Customization available w/MOQ: Cable type, length, connector type, mounting style
TEL-DS-INTERNAL GPS 1210
Any information furnished by Laird Technologies, Inc. and its agents is
believed to be accurate and reliable. Responsibility for the use and
application of Laird Technologies materials rests with the end user, since
Laird Technologies and its agents cannot be aware of all potential uses. Laird
Technologies makes no warranties as to the fitness, merchantability or
suitability of any Laird Technologies materials or products for any specific
or general uses. Laird Technologies shall not be liable for incidental or
consequential damages of any kind. All Laird Technologies products are sold
pursuant to the Laird Technologies’ Terms and Conditions of sale in effect
from time to time, a copy of which will be furnished upon request. © Copyright
2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies,
the Laird Technologies Logo, and other marks are trade marks or registered
trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other
product or service names may be the property of third parties. Nothing herein
provides a license under any Laird Technologies or any third party
intellectual property rights.
Support
Global solutions: local support TM
Americas: +810.695.9810
Europe: +44.1628.858.940
Asia: +852.2268.6567
www.lairdtech.com