MEAN WELL LRS-600 Series 600W Single Output Switching Power Supply User Manual

: June 3, 2024
: MEAN WELL

Table of Contents

MEAN WELL LRS-600 Series 600W Single Output Switching Power Supply
Features
Description
Model Encoding
SPECIFICATION
Block Diagram
Mechanical Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEAN WELL LRS-600 Series 600W Single Output Switching Power Supply

MEAN-WELL-LRS-600-Series-600W-Single-Output-Switching-Power-Supply-
PRO

Features

MEAN WELL patent pending (Application number CN202220241473.0, CN2022300605 11.8)
AC input range selectable by switch
Withstand 300VAC surge input for 5 second
Protections: Short circuit/ Overload/Over voltage/ Over temperature
Forced air cooling
Built-in cooling Fan ON-OFF control
1U low profile
Withstand 5G vibration test
High operating temperature up to 65C
Operating altitude up to 5000 meters (Note. 10)
3 years warranty
MTBF>1KK hrs

Applications

Industrial automation machinery
Industrial control system
Mechanical and electrical equipment
Electronic instruments, equipments or apparatus

GTIN CODE
MW Search: https://www.meanwell.com/seviceGTIN.aspx

Description

LRS-600 series is a 600W single-output enclosed type power supply with 41mm of low profile design. Adopting the input of 115VAC or 230VAC (select by switch), the entire series provides an output voltage line of 5V, 12V, 15V, 24V, 27V, 36V and 48V.In addition to the high efficiency up to 92%, with the built-in long life fan LRS-600 can work under -20~+65 C with a full load. LRS-600 has complete protection functions and 5G anti-vibration capability; It complies with complete international safety regulations. LRS-600 series serves as a high-price-to-performance power supply solution for various industrial applications.

Model Encoding

SPECIFICATION

MODEL| LRS-600-5| LRS-600-12| LRS-600-15| LRS-600-24| LRS-600-27| LRS-600-36| LRS-600-48
---|---|---|---|---|---|---|---
**OUTPUT| DC VOLTAGE| 5V| 12V| 15V| 24V| 27V| 36V| 48V
RATED CURRENT| 100A| 50A| 40A| 25A| 22.2A| 16.6A| 12.5A
CURRENT RANGE| 0 ~ 100A| 0 ~ 50A| 0 ~ 40A| 0 ~ 25A| 0 ~ 22.2A| 0 ~ 16.6A| 0 ~ 12.5A
RATED POWER| 500W| 600W| 600W| 600W| 599.4W| 597.6W| 600W
RIPPLE & NOISE (max.) Note.2| 200mVp-p| 200mVp-p| 200mVp-p| 240mVp-p| 270mVp-p| 360mVp-p| 360mVp-p
VOLTAGE ADJ. RANGE Note.3| 4.75 ~ 5.5V| 11.4 ~ 13.2V| 14.25 ~ 16.5V| 22.8 ~ 26.4V| 25.65 ~ 29.7V| 34.2 ~ 39.6V| 45.6 ~ 52.8V
VOLTAGE TOLERANCE Note.4| ±2.0%| ±1.5%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
LINE REGULATION Note.5| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION Note.6| ±2.0%| ±1.0%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
SETUP, RISE TIME Note.7| 1300ms, 50ms/230VAC 1300ms,50ms/115VAC at full load
HOLD UP TIME (Typ.)| 20ms/230VAC     16ms/115VAC at full load
****INPUT| VOLTAGE RANGE Note.8| 90 ~ 132VAC / 180 ~ 264VAC by switch        255 ~ 370VDC (swith on 230VAC)
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY (Typ.)| 86%| 90%| 90%| 91%| 91%| 92%| 92%
AC CURRENT (Typ.)| 12A/115VAC         7.5A/230VAC
INRUSH CURRENT (Typ.)| 35A/115VAC        60A/230VAC
LEAKAGE CURRENT| <2mA / 240VAC
****PROTECTION**

(Note.9)

| ****

OVER LOAD

| 105 ~ 150% rated output power
Constant current limiting, unit will shutdown after 3 sec. re-power on to recover

OVER VOLTAGE

| 5.75 ~ 6.75V| 13.8 ~ 16.2V| 18 ~ 21V| 27.6 ~ 32.4V| 31 ~ 36.5V| 41.4 ~ 48.6V| 55.2 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, re-power on to recover
**FUNCTION| FAN ON/OFF CONTROL**

(Typ.)

SAFETY STANDARDS

| BS IEC/UL 62368-1, EAC TP TC 004,AS/NZS62368.1 approved,

BIS IS13252(Part1):2010/IEC60950-1:2005(except for 48V)(pending),BSMI CNS15598-1(pending)

WITHSTAND VOLTAGE| I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to EAC TP TC 020, BSMI CNS15936(pending)
EMC IMMUNITY| Compliance to EAC TP TC 020
**OTHERS| MTBF| 1533.4K hrs min. Telcordia SR-332(Bellcore) ; 301.7K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| 22512441mm (LWH)
PACKING| 0.95Kg/12pcs/12.4Kg/0.78CUFT
NOTE**| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Voltage adjustment can only be operated within the input range of 100~120VAC or 200-240VAC.

f the voltage adjustment is performed outside this range, it may cause abnormal output.

4. Tolerance : includes set up tolerance, line regulation and load regulation.

5. Line regulation is measured from low line to high line at rated load.

6. Load regulation is measured from 0% to 100% rated load.

7. Length of set up time is measured at cold start. Turning the power supply on/off frequently may lead to increase of the set up time.

8. Derating may be needed under low input voltages. Please refer to”Static Characteristics” sections for details.

9. Once protections are triggered, 4min(Typ.) of cold down time is required before restart.

10. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft).

11. This power supply does not meet the harmonic current requirements outlined by EN61000-3-2. Please do not use this power supply under the following conditions:

a) the end-devices is used within the European Union, and

b) the end-devices is connected to public mains supply with 220Vac or greater rated nominal voltage, and

c) the power supply is:

– installed in end-devices with average or continuous input power greater than 75W, or

– belong to part of a lighting system Exception:

Power supplies used within the following end-devices do not need to fulfill EN61000-3-2

a) professional equipment with a total rated input power greater than 1000W;

b) symmetrically controlled heating elements with a rated power less than or equal to 200W

※ Product Liability Disclaimer：For detailed information, please refer to https://[www.meanwell.com/serviceDisclaimer.aspx](http://www.meanwell.com/serviceDisclaimer.aspx)