mr steam 104318 Sauna Bath Installation Guide

June 9, 2024
Mr.Steam

mr steam 104318 Sauna Bath

mr-steam-104318-Sauna-Bath-Installation-product

INSTALLER SECTION

Installing the Caddy

mr-steam-104318-Sauna-Bath-Installation-fig-1

Box Contents

  • Stainless steel caddy
  • Mounting screws (2)
  • Instructions

Tools required

  • Cordless drill with a Phillips bit
  • Level
    • Use only non-sparking tools. Take pre- cautionary measures against static discharge

Locating the Caddy

  1. Place in a location that allows visual monitoring of the fragrances level.
  2. Place in a location that allows for easy replacement of the fragrance container.
  3. The caddy should not be installed in areas accessible to children. A locked room is strongly recommended (ie: utility room).
  4. The caddy must be installed below the pump. The maximum distance from the pump to the bottom of the caddy is 6 feet. (Diagram 1)
  5. The caddy is designed and intended for indoor use only. Do not install outdoors.
  6. Do not install in an unheated location where water could freeze.
  7. Locate in a area where the ambient temperature does not exceed 88˚ F.

Mounting the Caddy on a Wall

mr-steam-104318-Sauna-Bath-Installation-fig-2

  1. Use a level to make sure the caddy is level.
  2. Use the two mounting screws provided to secure the caddy using the two holes at the top of the caddy (Diagram 2).
  3. Use anchors or other hardware as required for secure mounting. Test the caddy for secure mounting.
  4. Insert the fragrance container with the label facing outward so it is visible through the caddy window (Diagram 4). The label contains important information.
  5. Connect the fragrance container to the pump accord-ing to instructions in the AromaSteam Fragrance Dispensing Pump Installation, Operation Manual (PUR 100402) (Diagram 5).
  6. Always keep the container in the caddy while it is connected to the dispensing pump.

WARNING
Using a fragrance container that is not secured in the caddy, or using a caddy that is not mounted may result in spillage, excessively strong vapors or a fire hazard.

Mounting the Caddy on a Floor

  1. Use the two mounting screws provided to secure the caddy using the two holes at the bottom of the caddy (Diagram 3).

  2. Use anchors or other hardware as required for secure mounting. Test the caddy for secure mounting.

  3. Insert the fragrance container with the label facing outward
    in a manner it is visible through the caddy window (Diagram 4). The label contains important information.

  4. Connect the fragrance container according to instructions in the AromaSteam Fragrance Dispensing Pump Installation, Operation Manual (PUR 100402).

  5. Always keep the container in the caddy while it is connected to the dispensing pump.

WARNING
Using a fragrance container that is not secured in the caddy, or using a caddy that is not mounted may result in spillage, excessively strong vapors or a fire hazard.

  • All diagrams for illustrative purposes only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals