CTA PAD-CFWM Custom Flex Wall Mount Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA PAD-CFWM Custom Flex Wall Mount
CONTENTS
INSTRUCTIONS
Attaching Foam Pad to Tablet Holder
Select the appropiate foam pad (D) according to the thickness of your
tablet (or tablet in its case), then press adhesive side into center of the
tablet holder.
Installing the Custom Flex Wall Mount to the Wall
Inserting Tablet to Holder
3a. Press quick release button on side of tablet holder (A) to release the
adjustable end.
3b. Insert tablet corner against the spring arm. Push adjustable arm down
against opposite corner (A). Be sure it is as snug as possible. Be sure to not
place on the corner where camera would be on tablet or else it will block.
Adjusting Flex Arm
Twist the screw knob of the arms counter-clockwise to release the
connection. Adjust the arms to your preferred position and then tighten the
screw knob clockwise.
Adjusting Tablet Holder
Tablet holder rotates 360° for custom viewing angles.
WARNING – DO NOT attempt to adjust, tilt, or rotate any ball socket
joints while it is fully tightened. Any such action will result in possible
damage and loss of integrity of product functioning at full capacity.
Manufacturer will not be responsible for any such actions by any person.
- www.ctadigital.com
- support@ctadigital.com
- 888-733-4448
- 36 Taaffe Place Brooklyn, NY 11205
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>